Bug#250324: install on Sun Ultra 5

[stappers@stappers.nl (Geert Stappers AT tw89)]

Package: installation-reports

INSTALL REPORT

Debian-installer-version:
http://ftp.nl.debian.org/debian/dists/sarge/main/installer-sparc/beta4/images/sparc32/netboot/boot.img
downloaded may 21th 2004
uname -a: Linux tw89 2.4.26-sparc64 #1 Sat Apr 24 01:43:10 EDT 2004 sparc64 GNU/Linux
Date: Sat, 22 May 2004 08:28:12 +0200
Method: network install, "boot net", http://ftp.nl.debian.org, not
proxied
Machine: Sun Ultra 5
Processor: Ultra Sparc 275Mhz
Memory: 128Mb
Root Device: IDE
Root Size/partition table:
Disk /dev/hda (Sun disk label): 15 heads, 63 sectors, 8894 cylinders
Units = cylinders of 945 * 512 bytes

   Device Flag    Start       End    Blocks   Id  System
/dev/hda1             0      2703   1277167+   1  Boot
/dev/hda2          2703      8519   2748060   83  Linux native
/dev/hda3             0      8894   4202415    5  Whole disk
/dev/hda4          8519      8894    177187+  82  Linux swap

Output of lspci and lspci -n:

pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
0000:00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11)
0000:00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11)
0000:01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
0000:01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
0000:01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 9a)
0000:01:03.0 IDE interface: CMD Technology Inc PCI0646 (rev 03)
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Class 0600: 108e:a000
0000:00:01.0 Class 0604: 108e:5000 (rev 11)
0000:00:01.1 Class 0604: 108e:5000 (rev 11)
0000:01:01.0 Class 0680: 108e:1000 (rev 01)
0000:01:01.1 Class 0200: 108e:1001 (rev 01)
0000:01:02.0 Class 0300: 1002:4754 (rev 9a)
0000:01:03.0 Class 0101: 1095:0646 (rev 03)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [E]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:


It was a netboot install,
the CD detect complained that there was no CD-ROM,
I had to acknowledge the "error"..


After all a succesfull installation.

Thanks


Cheers
Geert Stappers