Bug#248047: (no subject)
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 2004-05-08, from
http://http.us.debian.org/debian/dists/testing/main/installer-mipsel/current/images/cobalt/netboot/
uname -a:
Linux remailer 2.4.25-r5k-cobalt #1 Thu Apr 15 15:17:00 BST 2004 mips GNU/Linux
Date: 2004-05-08, about 19:00GMT
Method: netboot install on cobalt RAQ2/NASRAQ, boot from network (TFTP/NFS),
network install from http://ftp.at.debian.org/, proxied over
my local squid.
Machine: Cobalt NasRAQ
Processor: MIPS, Nevada V10.0 FPU V10.0
Memory: 64 MB
Root Device: IDE (Seagate ST320423A)
Root Size/partition table:
Disk /dev/hda: 2490 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/hda1 * 0+ 1 2- 16033+ 83 Linux /boot
/dev/hda2 2 2311 2310 18555075 83 Linux /
/dev/hda3 2312 2489 178 1429785 83 Linux swap
/dev/hda4 0 - 0 0 0 Empty
Output of lspci and lspci -n:
0000:00:00.0 Memory controller: Marvell: Unknown device 4146 (rev 11)
0000:00:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 41)
0000:00:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c860 (rev 02)
0000:00:09.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo
VP] (rev 27)
0000:00:09.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82
3x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:09.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
(rev 02)
0000:00:00.0 Class 0580: 11ab:4146 (rev 11)
0000:00:07.0 Class 0200: 1011:0019 (rev 41)
0000:00:08.0 Class 0100: 1000:0006 (rev 02)
0000:00:09.0 Class 0601: 1106:0586 (rev 27)
0000:00:09.1 Class 0101: 1106:0571 (rev 06)
0000:00:09.2 Class 0c03: 1106:3038 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [ ]
Reboot: [O]
Comments/Problems:
given that this is a beta on a rather off-mainstream platform, it worked
very well.
Reply to: