Bug#221167: installation-reports: Install from SCSI (Symbios Logic 53c875) CDROM failed
Package: installation-reports
Version: beta-1
Severity: critical
INSTALL REPORT
Debian-installer-version: 2003/11/16, http://gluck.debian.org/cdimage/testing/netinst/i386/beta-1/sarge-i386-businesscard.iso
uname -a: n/a
Date: 2003/11/16 17:20 EST
Method: Attempted to install from 50MB CD image. Booted from CD via SCSI BIOS
Machine: homebuilt whitebox
Processor: Intel PII (Deschutes) 375
Memory: 512MB
Root Device: n/a (didn't get that far)
Root Size/partition table: n/a (didn't get that far)
Output of lspci: (from a boot of RH 7.2, since I couldn't get installed)
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:02.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:02.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:02.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:02.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:0d.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 03)
00:0e.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 02)00:0f.0 Unknown mass storage controller: Promise Technology, Inc.: Unknown device 4d69 (rev 02)
00:10.0 Unknown mass storage controller: Promise Technology, Inc.: Unknown device 4d69 (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [E]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Booted from SCSI CD and selected the installation langauge. The hardware
detection ran, but couldn't find the CD. I attempted to use manual
configuration, but didn't see an appropriate option.
Same problem with the 2003/11/15 daily build.
Reply to: