Bug#220827: Failed install
Package: installation-reports
I downloaded an installer about a week ago
from http://www.debian.org/devel/debian-installer/.
After I booted and answered a few questions, the installer hung with a
message that it couldn't find any cdrom on my system. I'm running a P4
system with motherboard Asus P4S533, booting from an AOPEN CD-RW
CRW2440, cd drive.
Here's the dmesg from my FreeBSD system (I got an extra disk drive and
wanted to check out Debian...)
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536854528 (511 MB)
avail memory = 510877696 (487 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc0690c02 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S533 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1b20
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce2 MX/MX 400> mem
0xf0000000-0xf7ffffff,0xe7000000-0xe7ffffff irq 11 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 5 at
device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ulpt0: Canon S600, rev 1.10/2.20, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 9 at
device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 961 UDMA100 controller> port 0xd800-0xd80f at device 2.5
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
sis0: <SiS 900 10/100BaseTX> port 0xb000-0xb0ff mem
0xe5800000-0xe5800fff irq 9 at device 3.0 on pci0
sis0: Ethernet address: 00:e0:18:94:ce:14
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 10 at device 5.0 on pci0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38172MB <MAXTOR 6L040L2> [77557/16/63] at ata0-master UDMA100
ad1: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-slave UDMA100
acd0: CD-RW <AOPEN CD-RW CRW2440> at ata1-master PIO4
acd1: DVD-ROM <JLMS DVD-ROM LTD-166S> at ata1-slave PIO4
Mounting root from ufs:/dev/ad1s1a
ipfw2 initialized, divert disabled, rule-based forwarding enabled,
default to deny, logging disabled
Reply to: