Accepted debhelper 9.20160403~bpo8+1 (source all) into jessie-backports, jessie-backports
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Fri, 10 Jun 2016 17:48:34 +0000
Source: debhelper
Binary: debhelper
Architecture: source all
Version: 9.20160403~bpo8+1
Distribution: jessie-backports
Urgency: medium
Maintainer: Debhelper Maintainers <debhelper-devel@lists.alioth.debian.org>
Changed-By: Niels Thykier <niels@thykier.net>
Description:
debhelper - helper programs for debian/rules
Closes: 188028 245554 436240 438930 459548 480576 488346 509931 510772 510855 511048 516721 549990 551463 563909 592958 595097 610173 615854 639168 659044 668851 668852 672282 676168 677353 680686 680687 698054 698500 714546 719148 726967 733045 736896 740405 744380 747141 748993 749400 758575 759895 772129 774100 774102 775020 776103 778927 779471 780133 781077 783898 784016 784582 784648 785811 786695 788098 788473 789153 789351 790820 791823 792207 793092 793440 793443 794396 794898 795193 795519 797002 797904 798116 798648 800332 800738 800919 802005 802198 802274 802984 803341 804631 805218 805404 806276 806392 806814 808603 810948 811038 811052 812136 812790 812879 814761 815401 815620 818049 818834
Changes:
debhelper (9.20160403~bpo8+1) jessie-backports; urgency=medium
.
* Rebuild for jessie-backports.
* Disable automatic dbgsym as it requires dpkg-dev 1.18.2
.
debhelper (9.20160403) unstable; urgency=medium
.
* d/control: Requre dh-autoreconf (>= 12) to ensure
non-autotools can be built in compat 10.
* dh: In a "PROMISE: DH NOOP" clause, make no assumptions
about being able to skip "foo(bar)" if "foo" is not known.
* debhelper.pod: Use DEB_HOST_ARCH instead of the incorrect
"build architecture". Thanks to Helmut Grohne for the
report.
* dh_makeshlibs: Use same regex for extracting SONAME as
dpkg-shlibdeps. (Closes: #509931)
* dh_makeshlibs: Add an ldconfig trigger if there is an
unversioned SONAME and the maintainer provides a
symbols file.
.
debhelper (9.20160402) unstable; urgency=medium
.
* Remove dh_desktop.
* dh_install: Fix a regression where a non-existing file
was ignored if another file was matched for the same
destination dir. Thanks to Ben Hutchings for reporting
the issue. (Closes: #818834)
* d/rules: Use overrides to disable unnecessary helpers
(for which debhelper does not Build-Depend on the
necessary packages to run the tools).
* dh: Enable "autoreconf" sequence by default in compat
10 (or higher). (Closes: #480576)
* d/control: Add a dependency on dh-autoreconf due to
the above.
* autoscripts/*-makeshlibs: Remove again. Most of the
reverse dependencies have migrated already.
* Declare compat 10 ready for testing.
.
debhelper (9.20160313) unstable; urgency=medium
.
* Remove dh_undocumented.
* dh_install: Attempt to improve the documentation of the
config file "debian/not-installed".
* dh_compress: Gracefully handle absolute paths passed via
the -P option. Thanks to Andreas Beckmann for reporting
the issue. (Closes: #818049)
.
debhelper (9.20160306) unstable; urgency=medium
.
[ Niels Thykier ]
* Remove dh_suidregister and related autoscripts. No package
(that can be built in unstable) invokes this tool.
* dh: Do not create stamp files when running with --no-act.
* dh_strip/dh_gencontrol: Move "is_udeb" guard to dh_strip.
This should avoid adding build-ids to udebs without having
the actual debug symbols available. Thanks to Jérémy Bobbio
for reporting the issue. (Closes: #812879)
* dh_makeshlibs: Do not claim to be using maintainer scripts
for invoking ldconfig. Thanks to Eugene V. Lyubimkin for
the report. (Closes: #815401)
* Remove dh_scrollkeeper. It is no longer used in unstable.
* autoconf.pm: Apply patch from Gergely Nagy to set "VERBOSE=1"
when running tests to make sure that the build logs are
dumped on error with automake. (Closes: #798648, #744380)
* dh_installdeb: In compat 10, properly shell escape lines
from the maintscript config file. This will *not* be fixed
retroactively since people have begun to rely on the bug
in previous versions (e.g. by quoting the file names).
Thanks to Jakub Wilk for reporting the issue.
(Closes: #803341)
* dh_installdeb: In compat 10, avoid adding two comments per line
in the maintscript file. Thanks to Didier Raboud for
reporting the bug. (Closes: #615854)
* cmake.pm: Apply patch from Helmut Grohne to correct the
name of the default cross compilers. (Closes: #812136)
* dh_installdeb: Clarify what goes in the "maintscript" config
files. Thanks to Julian Andres Klode for the report.
(Closes: #814761)
* dh_compress: Correct and warn if given a path with a package
tmp dir prefix (e.g. "debian/<pkg>/path/to/file").
* dh_compress: Handle file resolution failures more gracefully.
Thanks to Daniel Leidert for reporting this issue.
(Closes: #802274)
* dh_installinit: Make --restart-after-upgrade the default in
compat 10. Packages can undo this by using the new
--no-restart-after-upgrade parameter.
* d/control: Update Vcs links.
* d/control: Bump Standards-Version to 3.9.7 - no changes
required.
* Import newer German translations from Chris Leick.
(Closes: #812790)
.
[ Joachim Breitner ]
* addsubstvar: Pass -a to grep to handle substvars with unicode content
gracefully (Closes: #815620)
.
debhelper (9.20160115) unstable; urgency=medium
.
* Fix brown paper bag bug that caused many packages to
FTBFS when dh_update_autotools_config was called.
(Closes: #811052)
* Revert removal of autoscripts/*-makeshlibs. Some packages
injected them directly into their maintainer scripts.
(Closes: #811038)
.
debhelper (9.20160114) unstable; urgency=low
.
[ Niels Thykier ]
* Dh_Lib.pm: Pass "-S" to dpkg-parsechangelog when requesting
the Version field.
* Drop compat level 3.
* dh_install: Only fallback to debian/tmp if the given glob
does not start with debian/tmp. This should make the
output on failures less weird.
* autoscripts/*-makeshlibs: Removed, no longer used.
* dh: In compat 10, drop the manual sequence control arguments
and the sequence log files. (Closes: #510855)
* dh_update_autotools_config: New helper to update config.sub
and config.guess.
* dh: Run dh_update_autotools_config before dh_auto_configure.
(Closes: #733045)
* d/control: Add dependency on autotools-dev for the new
dh_update_autotools_config tool.
* dh_installinit: Correct the "PROMISE NOOP" clause to account
for /etc/tmpfiles.d and /usr/lib/tmpfiles.d.
* dh_strip: Add "--(no-)automatic-dbgsym" and "--dbgsym-migration"
options to replace "--(no-)ddebs" and "--ddeb-migration".
(Closes: #810948)
.
[ Dmitry Shachnev ]
* dh_install: Fail because of missing files only after processing
all file lists for all packages. (Closes: #488346)
.
debhelper (9.20151225) unstable; urgency=medium
.
* dh_installmanpages: Fix call to getpackages. Thanks to
Niko Tyni for reporting the issue. (Closes: #808603)
* Dh_Lib.pm: Restore the behaviour of getpackages(), which
is slightly different from getpackages('both'). Fixes
a regression introduced in 9.20151220.
.
debhelper (9.20151220) unstable; urgency=medium
.
* dh_strip: Document that dbgsym packages are built by
default.
* Dh_Lib: Cache the results of getpackages.
* dh_gencontrol: Create debug symbol packages with the same
component as the original package.
.
debhelper (9.20151219) unstable; urgency=medium
.
* dh_installinit: Apply patch from Reiner Herrmann to sort
temporary files put in postinst. (Closes: #806392)
* dh_installinit: Import change from Ubuntu to add /g
modifier when substituting the auto-script snippets.
* dh_*: Add /g when substituting the auto-script snippts in
other commands as well.
* dh_strip: Do not assume that ELF binaries have a Build-Id.
Thanks to Helmut Grohne for spotting this issue.
(Closes: #806814)
* dh_strip: Enable generation of dbgsym packages by default.
Thanks to Ansgar Burchardt and Paul Tagliamonte for
implementing the DAK side of this feature.
(Closes: #510772)
.
debhelper (9.20151126) unstable; urgency=medium
.
* dh_compress: Apply patch from Michael Biebl to skip
compression of .devhelp2 files. (Closes: #789153)
* dh_installinit: Undo "Disable initscripts when a package is
removed (but not yet purged)". (Reopens #749400,
Closes: #806276)
.
debhelper (9.20151117) unstable; urgency=medium
.
[ Niels Thykier ]
* dh_clean: Temporarily interpret the absence of d/compat and
DH_COMPAT to mean compat 5. This is to avoid breaking
packages that rely on cdbs to set debian/compat to 5 during
the build. This temporary work around will live until
d/compat becomes mandatory. (Closes: #805404)
.
[ Translations ]
* Update German translation (Chris Leick)
(Closes: #802198)
.
debhelper (9.20151116) unstable; urgency=medium
.
[ Niels Thykier ]
* dh_strip: Sort build-ids to make the Build-Ids header
reproducible.
* Dh_Lib.pm: Respect --no-act in autotrigger, thanks to
Andreas Henriksson and Helmut Grohne for reporting
the issue. (Closes: #800919)
* Fix typos in various manpages. Thanks to Chris Leick
for reporting them.
* dh_clean: Avoid cleaning up debian/.debhelper when
passed the "-d" flag.
* Dh_Lib.pm: Reject compat levels earlier than 3.
* dh_clean: Support removal of directory (plus contents)
when they are marked with a trailing slash.
(Closes: #511048)
* dh_install,dh_installdocs,dh_installexamples: Apply
patches from Niko Tyni to make timestamp of directories
created from "find"-pipelines reproducible.
(Closes: #802005)
* dh_installinit: The postinst snippets are now only run
during "configure" or "abort-upgrade".
(Closes: #188028)
* cmake.pm: Apply patch from Jonathan Hall to fix an
accidental error hiding. (Closes: #802984)
* qmake.pm: Apply patch from Sergio Durigan Junior to
create the build dir if it doesn't exist.
(Closes: #800738)
* dh_installinit: Disable initscripts when a package is
removed (but not yet purged). (Closes: #749400)
* Dh_Lib.pm: Reject debian/compat files where the first
line is not entirely a positive number.
.
[ Translations ]
* Update German translation (Chris Leick)
(Closes: #802198)
* Update Portuguese translation (Américo Monteiro)
(Closes: #804631)
* Updated french translation (Baptiste Jammet)
(Closes: #805218)
.
debhelper (9.20151005) unstable; urgency=medium
.
* dh_strip: Sort build-ids to make the Build-Ids header
reproducible.
* Dh_Lib.pm: Respect --no-act in autotrigger, thanks to
Andreas Henriksson and Helmut Grohne for reporting
the issue. (Closes: #800919)
.
debhelper (9.20151004) unstable; urgency=medium
.
[ Niels Thykier ]
* dh/dh_auto_*: Apply patch from Eduard Sanou to define
SOURCE_DATE_EPOCH. (Closes: #791823)
* cmake.pm: Add better cross-compile support for cmake.
Heavily based on a patch from Helmut Grohne.
(Closes: #794396)
* cmake.pm: Pass -DCMAKE_INSTALL_SYSCONFDIR=/etc and
-DCMAKE_INSTALL_LOCALSTATEDIR=/var to cmake. Thanks to
Felix Geyer, Lisandro Damián Nicanor Pérez Meyer and
Michael Terry for the assistance plus suggestions.
(Closes: #719148)
* dh_installinit: Quote directory name before using it in
a regex.
* dh_installinit: Create script snippts for tmpfiles.d
files even if the package has no sysvinit script or
explicit debian/<package>.service file.
(Closes: #795519)
* dh_makeshlibs: Revert passing -X to ldconfig in compat 10
after talking with the glibc maintainer. This is not the
right place to make this change.
* d/control: Remove the homepage field.
* dh: Make dh_strip_nondeterminism optional, so debhelper
does not need to build-depend on it.
* dh_gencontrol/dh_builddeb: Temporarily stop building ddebs
for udebs as dpkg-gencontrol and dpkg-deb does not agree
the default file extension for these.
* dh_builddeb: Generate udebs with the correct filename even
when "-V" is passed to dpkg-gencontrol. This relies on
dpkg-deb getting everything but the extension correct
(see #575059, #452273 for why it does not produce the
correct extesion).
(Closes: #516721, #677353, #672282)
* Dh_Lib.pm: Drop now unused "udeb_filename" subroutine.
* dh_strip.1: Correct the documentation about ddebs to
reflect the current implementation (rather than the
desired "state"). Thanks to Jakub Wilk for the report.
(Closes: #797002)
* dh_fixperms: Reset permissions to 0644 for .js, .css,
.jpeg, .jpg, .png, and .gif files. Thanks to Ernesto
Hernández-Novich for the suggestion. (Closes: #595097)
* dh_install: Read debian/not-installed if present as a
list of files that are deliberately not installed.
Files listed here will not cause dh_install to complain
with --list-missing. Thanks to Peter Eisentraut for the
suggestion. (Closes: #436240)
* Dh_Lib: Cherry-pick patch from Chris Lamb to only read
the latest changelog entry when determing the
SOURCE_DATE_EPOCH.
* debhelper.7: Provide a better example of how to insert
the debhelper maintainer script snippets into a maintainer
script written in Perl. Thanks to Jakub Wilk for
reporting the issues. (Closes: #797904)
* dh_shlibdeps: The "-L" option can now be passed multiple
times with different package names. Thanks to Tristan
Schmelcher for the suggestion. (Closes: #776103)
* dh,Buildsytems: In compat 10, default to --parallel.
* dh,Buildsytems: Accept "--no-parallel" to disable
parallel builds. It is effectively the same as using
--max-parallel=1 but may be more intuitive to some people.
* dh_makeshlibs: Use a noawait trigger to invoke ldconfig
rather maintscripts.
* dh_installdirs.1: Add a note that many packages will work
fine without calling dh_installdirs. (Closes: #748993)
* dh_compress: Apply patch from Rafael Kitover to support
passing files to dh_compress that would have been
compressed anyway. (Closes: #794898)
* Dh_Lib: Apply patch from Gergely Nagy to make debhelper
export "DH_CONFIG_ACT_ON_PACKAGES" when executing an
executable debhelper config file. This is intended to
assist dh-exec (etc.) in figuring what packages are
acted on. (Closes: #698054)
* dh_movefiles: Expand globs in arguments passed in all
compat levels (and not just compat 1 and 2).
(Closes: #800332)
* dh_installinit: Clearly document that --onlyscripts
should generally be used with -p (or similar) to limit
the number of affected packages. (Closes: #795193)
.
[ Paul Tagliamonte ]
* dh_gencontrol: Put debug debs back in the "debug" section.
* dh_strip/dh_gencontrol: Add a space separated list of
build-ids in the control file of packages containing
deattached debug symbols.
.
[ Andrew Ayer ]
* d/control: Depend on dh-strip-nondeterminism
* dh: Call dh_strip_nondeterminism during build.
(Closes: #759895)
.
[ Colin Watson ]
* Buildsystem.pm: Fix doit_in_sourcedir/doit_in_builddir to
always chdir back to the original directory even if the
subprocess exits non-zero. (Closes: #798116)
.
[ Translations ]
* Update Portuguese translation (Américo Monteiro)
(Closes: #790820)
.
debhelper (9.20150811) unstable; urgency=medium
.
* d/changelog: Add missing entry for dh_md5sums/#786695 in
the 9.20150628 release.
* Makefile: Set LC_ALL=C when sorting.
* dh: Avoid passing --parallel to other debhelper commands
if it is the only option and "parallel" is not set (or
set to 1) in DEB_BUILD_OPTIONS.
* dh_strip: Apply patch from Guillem Jover to fix a typo.
(Closes: #792207)
* dh_makeshlibs: Avoid an uninitialised warning in some
error cases. Thanks to Jakub Wilk for reporting it.
(Closes: #793092)
* Dh_Lib.pm: Apply patch from Guillem Jover to use the
value of dpkg-architecture variables from the environment,
if present. (Closes: #793440)
* Dh_Buildsystems.pm/Dh_Lib.pm: Import Exporter's import
subroutine rather than adding Exporter to @ISA.
* Dh_Lib.pm: Use Dpkg::Arch's debarch_is rather than running
dpkg-architecture to determine if an architecture matches
a wildcard. Heavily based on a patch from Guillem Jover.
(Closes: #793443)
* dh_strip: Always compress debug sections of debug symbols
in ddebs.
* dh_strip: Strip ".comment" and ".note" sections from static
libraries. Thanks to Helmut Grohne for the suggestion.
(Closes: #789351)
* dh_gencontrol: Stop explicitly passing -DSource to
dpkg-gencontrol when building ddebs. The passed value was
wrong sometimes (e.g. with binNMUs) and dpkg-gencontrol
since 1.18.2~ computes the value correctly.
* d/control: Bump dependency on dpkg-dev to 1.18.2~ for
ddebs. Build-depends not bumped since debhelper itself
does not produce any ddebs.
* dh_makeshlibs: Continue generating reports from
dpkg-gensymbols after the first error. This helps
packages with multiple libraries to spot all the symbol
issues in one build.
.
debhelper (9.20150628) unstable; urgency=medium
.
* Upload to unstable with ddebs support disabled by default.
.
[ Niels Thykier ]
* Buildsystem.pm: Apply patch from Emmanuel Bourg to
provide doit_in_{build,source}dir_noerror methods.
(Closes: #785811)
* Dh_Lib.pm: Promote error_exitcode to a regular exported
subroutine (from an internal one).
* dh_compress: Apply patch from Osamu Aoki to avoid compressing
".xhtml" files and to use a POSIX compliant find expression.
(Closes: #740405)
* dh_makeshlibs: Fix typo in manpage. Thanks to Jakub Wilk for
reporting it. (Closes: #788473)
* dh_auto_test: Run tests by default even during cross-building.
(Closes: #726967)
* dh_gencontrol: Put ddebs in the "debugsym" section.
* dh_strip: Support a new --[no-]ddebs option intended for
packages to disable automatic ddebs.
* dh_strip: Do not create ddebs for "-dbg" packages.
* dh_builddeb/dh_gencontrol: Let dpkg figure out the name
of the ddebs itself now that ddebs uses a ".deb"
extension.
* dh_md5sums: create DEBIAN dir in ddebs before using it.
(Closes: #786695)
.
[ Thibaut Paumard ]
* Bug fix: "dh_usrlocal leaves directories behind", thanks to Andreas
Beckmann (Closes: #788098).
.
debhelper (9.20150519+ddebs) experimental; urgency=medium
.
* dh_strip: Add --ddeb-migration option to support migration
from a --dbg-package to a automatic ddeb.
* Dh_Lib.pm: Add "package_multiarch" function.
* d/control: Add versioned Build-Depends on dpkg-dev to support
creating ddebs with the ".deb" extension.
* Dh_lib.pm: Generate ddebs with the ".deb" extension.
* dh_gencontrol: Reduce the "pkg:arch" to "pkg" as APT and dpkg
disagree on what satisfies an "pkg:arch" dependency.
* dh_strip.1: Document what inhibits ddeb generation.
* dh_gencontrol: Only mark a ddeb as Multi-Arch: same if the
original deb was Multi-Arch: same. All other ddebs are now
Multi-Arch: no (by omitting the field).
* dh_strip: Avoid generating a ddeb if the same name as an
explicitly declared package. Apparently, Ubuntu has been
creating some of these manually.
.
debhelper (9.20150507) unstable; urgency=medium
.
[ Niels Thykier ]
* dh_bugfiles: Fix regression in installing the reportbug
script correctly. Thanks to Jakub Wilk for reporting.
(Closes: #784648)
.
[ Translation updates ]
* pt - Thanks to Américo Monteiro.
(Closes: #784582)
.
debhelper (9.20150502+ddebs) experimental; urgency=medium
.
* Add /experimental/ ddebs support *if* the environment
variable DH_BUILD_DDEBS is set to 1.
.
debhelper (9.20150502) unstable; urgency=medium
.
* dh_compress: REVERT change to avoid compressing ".xhtml"
files due to #784016. (Reopens: #740405, Closes: #784016)
.
debhelper (9.20150501) unstable; urgency=medium
.
[ Niels Thykier ]
* dh_strip: Recognise .node as potential ELF binaries that
should be stripped like a regular shared library. Thanks
to Paul Tagliamonte for the report. (Closes: #668852)
* dh_shlibdeps: Recognise .node as potential ELF binaries that
should be processed like a regular shared library. Thanks
to Paul Tagliamonte for the report. (Closes: #668851)
* Convert package to the 3.0 (native) format, so dpkg-source
strips the .git directory by default during build.
* Reorder two paragraphs in d/copyright to avoid one of them
being completely overwritten by the other.
* d/control: Use the canonical URLs for the Vcs-* fields.
* dh_makeshlibs: Apply patch from Jérémy Bobbio to ensure
stable ordering of generated shlibs files.
(Closes: #774100)
* dh_icons: Apply patch from Jérémy Bobbio to ensure stable
ordering of the icon list inserted into generated maintainer
scripts. (Closes: #774102)
* Dh_lib: Add a public "make_symlink" subroutine allowing
dh_*-like tools to generate policy compliant symlinks without
invoking dh_link. (Closes: #610173)
* dh_compress: Apply patch from Osamu Aoki to avoid compressing
".xhtml" files. (Closes: #740405)
* dh_gconf: Apply patch from Josselin Mouette to avoid
dependency on gconf2 for installs of non-schema files.
(Closes: #592958)
* dh_fixperms: Correct permissions of reportbug files and scripts.
Thanks to Fabian Greffrath for the report and a basic patch.
(Closes: #459548)
* The "ant" build system now loads debian/ant.properties
automatically before build and clean (like CDBS). Thanks to
Thomas Koch for the report. (Closes: #563909)
* Dh_lib: Add install_dh_config_file to install a file either by
copying the source file or (with an executable file under compat
9) execute the file and use its output to generate the
destination.
* dh_lintian: Under compat 9, the debian/lintian-overrides are now
executed if they have the exec-bit set like the debian/install
files. Thanks to Axel Beckert for the report. (Closes: #698500)
* d/rules: Remove makefile target only intended for/used by the
previous maintainer.
* dh_makeshlibs: In compat 10+, pass "-X" to ldconfig to
only regenerate the cache (instead of also creating missing
symlinks). Thanks to Joss Mouette for the suggestion.
(Closes: #549990)
* autoscripts/post{inst,rm}-makeshlibs-c10: New files.
* dh_strip: Pass the --enable-deterministic-archives option to strip
when it is stripping static libraries. This avoids some
unnecessary non-determinism in builds. Based on patch by
Andrew Ayer.
* dh_install, dh_installdocs, dh_installexamples and dh_installinfo:
Pass --reflink=auto to cp. On supported filesystems, this provides
faster copying.
* Make perl tests verbose. Thanks to gregor herrmann for the patch.
(Closes: #714546)
* Dh_Lib.pm: Apply patch from Martin Koeppe to provide
install_{dir,file,prog,lib} subroutines for installing directories,
regular files, scripts/executables and libraries (respectively).
* Migrate many "ad-hoc" calls to "install" to the new "install_X"
subroutines from Dh_Lib.pm. Based on patch from Martin Koeppe.
(Closes: #438930)
* dh_gconf: Apply patch from Martin Koeppe to avoid adding a layer
of shell-escaping to a printed command line when the command was
in fact run without said layer of shell-escaping.
* dh_installdocs: Use ${binary:Version} for generating dependencies
with "--link-doc" instead of trying to determine the correct
package version. Thanks to Stephen Kitt for reporting this
issue. (Closes: #747141)
* dh_installdocs.1: Document that --link-doc may in some cases
require a dir to symlink (or symlink to dir) migration.
(Closes: #659044)
* dh_usrlocal: Apply patch from Jérémy Bobbio to generate
deterministic output. (Closes: #775020)
* dh_makeshlibs: In compat 10, install the maintainer-provided shlibs
file (replacing the generated one). (Closes: #676168)
* dh_installdeb: In compat 10, stop installing the maintainer-provided
shlibs file as it is now done by dh_makeshlibs instead.
* dh_installdocs: Remove remark about dh_installdocs not being
idempotent as it no longer adds anything to maintainer scripts.
* autoscripts/*-emacsen: Apply patch from Paul Wise to check that
emacs-package-{install,remove} is (still) present before invoking
it. (Closes: #736896)
* dh_install.1: Document that dh-exec can be used to do renaming
and provide a trivial example of how to achieve it. (Closes: #245554)
* dh_makeshlibs: Apply patch from Guillem Jover to stop adding
Pre-Depends on multiarch-support. The transition is far enough that
we do not need it any longer. (Closes: #783898)
* dh_gencontrol: Insert an empty misc:Pre-Depends to avoid warnings
in packages for using a (now often) non-existing substvars.
* d/control: Remove versioned conflicts that are no longer relevant.
.
[ Bernhard R. Link ]
* Dh_lib: apply patch from Guillem Jover to support case-insensitive
control field names. (Closes: #772129)
* add DH_QUIET environment variable to make things more silent
* dh: don't output commands to run if DH_QUIET is set
* buildsystems print commands unless DH_QUIET is set
(Closes: #639168, #680687)
* autoconf is always passed one of
--enable-silent-rules (if DH_QUIET is set) or
--disable-silent-rules (otherwise). (Closes: #551463, #680686)
* dh_compress: exclude .xz .lzma and .lz files from compression
(Closes: #778927)
* dh_installwm: call by dh after dh_link (Closes: #781077),
error out in compat 10 if no man page found
.
[ Jason Pleau ]
* dh_installchangelogs: Add CHANGES.md to the list of common changelog
filenames (Closes: #779471)
.
[ Axel Beckert ]
* dh_installchangelogs: Consistent suffix search order (none, ".txt",
".md") for all upstream changelog file names ("changelog", "changes",
"history").
+ Looks for "history.md" now, too.
+ Makes it easier to add base names or suffixes in the future.
* dh_installchangelogs: Also look for changelogs with .rst suffix.
.
[ Tianon Gravi ]
* debhelper.pod: Clarify "ENVIRONMENT" requirements for Makefile syntax.
(Closes: #780133)
.
[ Translation updates ]
* pt - Thanks to Américo Monteiro.
(Closes: #758575)
Checksums-Sha1:
77533cc408d7713de70577488a53aaf72cb70682 1713 debhelper_9.20160403~bpo8+1.dsc
d7ff67b75a19335c26255e938fe478b37e83e49e 336768 debhelper_9.20160403~bpo8+1.tar.xz
c4de26e64c9bd7544d6ab25fbf5b3bb720c2bc4a 803134 debhelper_9.20160403~bpo8+1_all.deb
Checksums-Sha256:
e58d21fa92fb1718bb1dd6a462e62f20581f32587de521207ee7d9859bce269c 1713 debhelper_9.20160403~bpo8+1.dsc
cbd7fc17726b89ddcb6afa05d82ab8b5f23216955dcb3908cc803e58292a0dc6 336768 debhelper_9.20160403~bpo8+1.tar.xz
8aa8d090128e84a39800d44d62c5f147ba2796cc1758792e5fa596aff3ce65a6 803134 debhelper_9.20160403~bpo8+1_all.deb
Files:
63bc1e5d2fede6081576736794279a8c 1713 devel optional debhelper_9.20160403~bpo8+1.dsc
26cd45ef61e72bc1b8bbbd587a44a739 336768 devel optional debhelper_9.20160403~bpo8+1.tar.xz
439c093c0b7eec8ab2e8ea0faa15bb13 803134 devel optional debhelper_9.20160403~bpo8+1_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IZ6P
-----END PGP SIGNATURE-----
Reply to: