[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Accepted redis 2:3.0.4-1~bpo8+1 (source amd64) into jessie-backports



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Fri, 11 Sep 2015 19:33:23 +0100
Source: redis
Binary: redis-server redis-tools redis-sentinel
Architecture: source amd64
Version: 2:3.0.4-1~bpo8+1
Distribution: jessie-backports
Urgency: medium
Maintainer: Chris Lamb <lamby@debian.org>
Changed-By: Chris Lamb <lamby@debian.org>
Description:
 redis-sentinel - Persistent key-value database with network interface (monitoring)
 redis-server - Persistent key-value database with network interface
 redis-tools - Persistent key-value database with network interface (client)
Closes: 533763 565358 570371 587395 604076 618326 628056 632499 632858 632931 647627 654900 654902 655416 661354 661919 672638 673202 696339 696618 723006 723162 723703 735272 741216 743750 751839 754634 756621 756709 775414 787257 793016 794437
Changes:
 redis (2:3.0.4-1~bpo8+1) jessie-backports; urgency=medium
 .
   * Rebuild for jessie-backports.
 .
 redis (2:3.0.4-1) unstable; urgency=medium
 .
   * New upstream release.
     - Sync debian/redis.conf.
   * Put --system further on to avoid issues with lintian false-positive (and to
     match the manpage).
 .
 redis (2:3.0.3-3) unstable; urgency=medium
 .
   * Replace ExecStop in systemd configuration with TimeoutStopSpec. Calls to
     `redis-cli shutdown` were not reliable if the port/UNIX socket had changed
     from the defaults (or is not accessible due to firewalling, permissions,
     etc.)
 .
     Note that we cannot simply remove ExecStop (hence TimeoutStopSpec) as we
     must wait for the server to fully shutdown - it may not have finished
     writing the dump file to disk and thus we would be risking silent data loss
     if it is SIGKILL'd.
 .
     Thanks to Chris Kuehl <ckuehl@ocf.berkeley.edu>. (Closes: #794437)
 .
 redis (2:3.0.3-2) unstable; urgency=medium
 .
   * Switch from RuntimeDirectory to systemd-tempfiles.
 .
     Both redis-server and redis-sentinel use the the same RuntimeDirectory
     (/run/redis). This is wrong since systemd removes RuntimeDirectory on
     service stop. So, stopping redis-server removes redis-sentinel.pid as well.
 .
     Using a systemd-tempfile is a more robust approach. We are also removing
     ExecStartPre lines since directory creation is handled in a different
     level.
 .
     Thanks to Christos Trochalakis <yatiohi@ideopolis.gr>. (Closes: #793016)
 .
 redis (2:3.0.3-1) unstable; urgency=medium
 .
   * New upstream release.
 .
 redis (2:3.0.2-3~bpo8+1) jessie-backports; urgency=medium
 .
   * Rebuild for jessie-backports.
 .
 redis (2:3.0.2-3) unstable; urgency=medium
 .
   * Add some missing tools:
     - ./utils/lru/
     - ./src/redis-trib.rb
     - Don't compress redis-trib.rb
     - Add ruby-redis to Suggests.
 .
 redis (2:3.0.2-2) unstable; urgency=medium
 .
   * Create /var/run/redis with the correct permissions in systemd .service
     files. Thanks to Sebastian Lipponer <mail@sebastianlipponer.de>.
     (Closes: #787257)
   * Install Bash completions to /usr/share/bash-completion/completions instead
     of /etc/bash_completion.d (see #787257).
 .
 redis (2:3.0.2-1~bpo8+1) jessie-backports; urgency=medium
 .
   * Rebuild for jessie-backports.
 .
 redis (2:3.0.2-1) unstable; urgency=medium
 .
   * New upstream release.
 .
 redis (2:3.0.1-1~bpo8+1) jessie-backports; urgency=medium
 .
   * Rebuild for jessie-backports.
 .
 redis (2:3.0.1-1) unstable; urgency=medium
 .
   * New upstream release.
 .
 redis (2:3.0.0-2~bpo8+1) jessie-backports; urgency=medium
 .
   * Rebuild for jessie-backports.
 .
 redis (2:3.0.0-2) unstable; urgency=medium
 .
   * redis-server was not able to start under systemd with default redis.conf
     due to the absence of /var/run/redis; when RuntimeDirectory is specified in
     *.service file, systemd creates the directory in /var/run and sets the
     correct permissions. Thanks to Mikhael A <spir@spir.ru>.
 .
 redis (2:3.0.0-1) unstable; urgency=medium
 .
   * New upstream stable release.
 .
 redis (2:3.0.0~rc6-2) unstable; urgency=medium
 .
   * Don't make test failures cause a build failure - known timing issues
     upstream.
 .
 redis (2:3.0.0~rc6-1) unstable; urgency=medium
 .
   * New upstream RC release.
 .
 redis (2:3.0.0~rc5-2) unstable; urgency=medium
 .
   * Upload to unstable.
 .
 redis (2:3.0.0~rc5-1) experimental; urgency=medium
 .
   * New upstream RC release.
   * wrap-and-sort entries.
   * Tidy debian/rules.
   * Move to debhelper compatibility level 9.
   * Don't run tests if nocheck specified.
   * Update debian/copyright.
 .
 redis (2:3.0.0~rc4-1) experimental; urgency=medium
 .
   * New upstream RC release.
   * wrap-and-sort.
   * Use the latest debian/changelog date in 05-reproducible-build.diff.
 .
 redis (2:3.0.0~rc3-1) experimental; urgency=medium
 .
   * New upstream RC release.
 .
 redis (2:3.0.0~rc2-2) experimental; urgency=medium
 .
   * Add Build-Depends on `tcl` for tests.
   * Add the following run-parts(8) directories that are be executed at the
     appropriate daemon start and stop actions:
 .
     - /etc/redis/redis-server.pre-up.d
     - /etc/redis/redis-server.pre-down.d
     - /etc/redis/redis-server.post-up.d
     - /etc/redis/redis-server.post-down.d
     - /etc/redis/redis-sentinel.pre-up.d
     - /etc/redis/redis-sentinel.pre-down.d
     - /etc/redis/redis-sentinel.post-up.d
     - /etc/redis/redis-sentinel.post-down.d
 .
     This is useful for loading Lua scripts which are not persisted across
     restarts. Scripts should be idempotent so that multiple calls to (eg.)
     "/etc/init.d/redis-server start" do not result in unintended consequences.
   * Also run Redis Sentinel tests.
 .
 redis (2:3.0.0~rc2-1) experimental; urgency=low
 .
   * New upstream RC release.
     - Sync debian/redis.conf.
   * Renable testsuite.
   * Add --oknodo to initscript "start" action to ensure correct return code if
     is already running.
   * Split redis-sentinel into its own package (Closes: #775414)
     - Move /usr/bin/redis-sentinel symlink to new package.
     - Fork ./sentinel.conf -> debian/sentinel.conf for own changes.
     - Add logrotate stanza.
     - Override permissions of /etc/redis/sentinel.conf with dpkg-statoverride -
       needs to be writable by Sentinel itself.
 .
 redis (2:2.8.19-3) unstable; urgency=medium
 .
   * Add DEP-8 smoke test.
 .
 redis (2:2.8.19-2) unstable; urgency=low
 .
   * Re-enable testsuite.
     - Add tcl to Build-Depends.
   * Add --oknodo to initscript "start" action to ensure correct return code if
     is already running.
   * Use the latest debian/changelog date in 05-reproducible-build.diff.
 .
 redis (2:2.8.19-1) unstable; urgency=medium
 .
   * New upstream release.
 .
 redis (2:2.8.18-1) unstable; urgency=low
 .
   * New upstream release.
     - Sync debian/redis.conf.
   * Attempt to make build reproducible by dropping timestamp/uname name from
     release.h.
   * Bump Standards-Version to 3.9.6.
 .
 redis (2:2.8.17-1) unstable; urgency=medium
 .
   * New upstream release.
 .
 redis (2:2.8.14-1) unstable; urgency=low
 .
   * New upstream release.
   * Guillaume Delacour:
     - Use dpkg-buildflags CFLAGS, CPPFLAGS (patch upstream Makefile) and
       LDFLAGS, also use pie and relro via DEB_BUILD_MAINT_OPTIONS
     - Call make V=1 to show gcc command lines (blhc) and enable parallel build
   * Sync debian/redis.conf and redis.conf.
   * Refresh 02-fix-ftbfs-on-kfreebsd patch.
 .
 redis (2:2.8.13-3) unstable; urgency=low
 .
   * Correct permissions of our /var directories by chowning them recursively.
     This is necessary, at least temporarily, as systemd users were previously
     running the daemon as root causing the files in those dirs to be owned by
     that user. We could be clever and only chown files owned by root to
     accomodate users who are not running as redis:redis but I think that's
     overkill. (Closes: #756709)
 .
 redis (2:2.8.13-2) unstable; urgency=low
 .
   * Under systemd, run under redis:redis. (Closes: #756621)
 .
 redis (2:2.8.13-1) unstable; urgency=low
 .
   * New upstream release.
   * Synchronise ./debian/redis.conf with ./redis.conf.
   * Update 03-use-system-jemalloc.diff.
   * Fix FTBFS under kfreebsd (Closes: #754634)
 .
 redis (2:2.8.12-1) unstable; urgency=low
 .
   * New upstream release.
     - Synchronise ./debian/redis.conf with ./redis.conf.
 .
 redis (2:2.8.11-1) unstable; urgency=low
 .
   * New upstream release.
     - Synchronise ./debian/redis.conf with ./redis.conf.
   * Drop copytruncate from logrotate stanza.
   * Prefer status_of_proc over `start-stop-daemon --stop --signal 0 ...`
     (Closes: #751839)
 .
 redis (2:2.8.8-2) unstable; urgency=low
 .
   * Add systemd support. Thanks to Wasif Malik <wmalik.ml@gmail.com>.
     (Closes: #743750)
 .
 redis (2:2.8.8-1) unstable; urgency=low
 .
   * New upstream release.
     - Sync debian/redis.conf and redis.conf.
 .
 redis (2:2.8.7-2) unstable; urgency=low
 .
   * Revamp maintainer scripts. (Closes: #741216)
 .
 redis (2:2.8.7-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:2.8.6-1) unstable; urgency=medium
 .
   * New upstream release.
 .
 redis (2:2.8.5-1) unstable; urgency=low
 .
   * New upstream release.
   * Update debian/redis.conf to include new tcp-backlog option.
 .
 redis (2:2.8.4-2) unstable; urgency=low
 .
   * Symlink redis-sentinel to redis-server as it's the same binary.
   * Install sentinel.conf.
 .
 redis (2:2.8.4-1) unstable; urgency=low
 .
   * New upstream version.
   * Sync debian/redis.conf.
   * Also ship redis-sentinel (Closes: #735272)
 .
 redis (2:2.8.2-1) unstable; urgency=low
 .
   * New upstream version.
 .
 redis (2:2.8.0-1) unstable; urgency=low
 .
   * New upstream release.
     - Update debian/patches/02-fix-ftbfs-on-kfreebsd.
     - Update debian/patches/03-use-system-jemalloc.diff.
     - Update debian/redis.conf
   * Bump Standards-Version to 3.9.4.
 .
 redis (2:2.6.16-3) unstable; urgency=low
 .
   * Add missing Replaces and Breaks to redis-tools. Thanks to Andreas Beckmann
     (anbe). (Closes: #723703)
 .
 redis (2:2.6.16-2) unstable; urgency=low
 .
   * Completely rework and refresh debian/copyright. (Closes: #723162)
   * Update website in debian/copyright.
   * Drop client library references from debian/copyright (dropped in
     2:1.1.90~beta-1).
   * Update main copyright year.
 .
 redis (2:2.6.16-1) unstable; urgency=low
 .
   * New upstream release.
   * Split non-server binaries into redis-tools package. (Closes: #723006)
   * Update debian/watch.
 .
 redis (2:2.6.14-2) unstable; urgency=low
 .
   * Source /lib/lsb/init-functions in initscript for systemd compatibility.
 .
 redis (2:2.6.14-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:2.6.13-1) unstable; urgency=low
 .
   * New upstream release.
     - Sync debian/redis.conf.
     - Update 02-fix-ftbfs-on-kfreebsd.diff.
 .
 redis (2:2.6.7-1) unstable; urgency=low
 .
   * New upstream release.
   * Add missing "status" command from usage. Thanks to Dererk
     <dererk@debian.org>. (Closes: #696339)
   * Enable building on kfreebsd-amd64 (and possibly kfreebsd-i386 and
     hurd-i386) by not depending on 'jemalloc' which would not be used anyway.
     Thanks to Jeff Epler <jepler@unpythonic.net>. (Closes: #696618)
 .
 redis (2:2.6.0-1) unstable; urgency=low
 .
   * New upstream release.
   * Update 02-fix-ftbfs-on-kfreebsd.diff.
   * Update 03-use-system-jemalloc.diff.
   * Update configuration file.
 .
 redis (2:2.4.17-1) unstable; urgency=low
 .
   * New upstream release.
   * Bump Standards-Version to 3.9.3.
 .
 redis (2:2.4.15-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:2.4.14-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:2.4.13-1) unstable; urgency=low
 .
   * New upstream release. (Closes: #673202)
   * Sync upstream redis.conf changes with debian/redis.conf.
 .
 redis (2:2.4.9-2) unstable; urgency=low
 .
   * Add /etc/default/redis-server option to call ``ulimit -n'' before
     invoking Redis. (Closes: #672638)
 .
 redis (2:2.4.9-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:2.4.8-1) unstable; urgency=low
 .
   * New upstream release.
   * Fix debian/watch (Closes: #661919)
   * Don't use jemalloc on archs not supporting it (Closes: #661354)
 .
 redis (2:2.4.5-1) unstable; urgency=low
 .
   * New upstream version (Closes: #655416)
   * Use system jemalloc. (Closes: #654900, #654902)
 .
 redis (2:2.4.2-2) unstable; urgency=low
 .
   * Fix test suite on sparc (Closes: #647627)
 .
 redis (2:2.4.2-1) unstable; urgency=low
 .
   * New upstream release.
   * /etc/init.d/redis-server fixes:
     - Send TERM, not QUIT signal.
     - Sleep 1 second after exiting as although the process has disappeared the
       server socket is somehow still in use which causes the start to fail.
   * Drop 01-fix-link-ordering patch; fixed upstream.
     <http://code.google.com/p/redis/issues/detail?id=562>.
   * Update 02-fix-ftbfs-on-kfreebsd.
   * Drop redis-doc package now that upstream no longer ship documentation.
 .
 redis (2:2.4.0~rc5-1) experimental; urgency=low
 .
   * New upstream RC release.
   * Update debian/redis.conf.
   * Drop documentation package - dropped upstream.
 .
 redis (2:2.2.12-1) unstable; urgency=low
 .
   * New upstream release.
   * Move runtime files to /var/run/redis/ and set that as default location for
     socket file. Thanks to Sandro Tosi <morph@debian.org>. (Closes: #632931)
   * Refresh fix-link-ordering patch.
   * Use "defined(__linux__) || defined(__GLIBC__)" for kfreebsd compatibility.
     Thanks to Robert Millan <rmh@debian.org>. (Closes: #632499)
 .
 redis (2:2.2.11-3) unstable; urgency=low
 .
   * Change default loglevel to "notice".
   * Wait forever for redis to stop - only waiting 10 seconds could cause data
     loss.
   * Set a proper default location for socket file. (Closes: #632931)
 .
 redis (2:2.2.11-2) unstable; urgency=low
 .
   * Fix FTBFS on kfreebsd. Thanks to Christoph Egger <christoph@debian.org> for
     the patch. (Closes: #632499)
   * Ship redis-check-aof and redis-check-dump. (Closes: #632858)
 .
 redis (2:2.2.11-1) unstable; urgency=low
 .
   * New upstream release.
   * Correct spelling of "Description" in patch system.
 .
 redis (2:2.2.10-1) unstable; urgency=low
 .
   * New upstream release.
   * Bump Standards-Version to 3.9.2.
 .
 redis (2:2.2.8-1) unstable; urgency=low
 .
   * New upstream release.
   * Add patch from Ubuntu to fix FTBFS due to --as-needed linking.
     Thanks to Nigel Babu <nigelbabu@ubuntu.com>. (Closes: #628056)
 .
 redis (2:2.2.5-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:2.2.4-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:2.2.2-1) unstable; urgency=low
 .
   * New upstream release.
   * Use userdel over deluser to prevent problems when purging package.
     (Closes: #618326)
 .
 redis (2:2.2.1-1) unstable; urgency=low
 .
   * New upstream release. (Closes: #604076)
   * Update install paths.
 .
 redis (2:2.0.1-2) unstable; urgency=low
 .
   * Upload to unstable.
 .
 redis (2:2.0.1-1) experimental; urgency=low
 .
   * New upstream release.
   * Update debian/watch to not match old tarballs.
   * Upstream now ships an install target; let's just ignore it for now.
 .
 redis (2:2.0.0~rc4-1) experimental; urgency=low
 .
   * New upstream RC release.
   * Bump Standards-Version to 3.9.1.
   * Remove mkreleasehdr.sh when building to avoid debian diff - it will
     regenerate release.h with different contents.
 .
 redis (2:2.0.0~rc3-1) experimental; urgency=low
 .
   * New upstream RC release.
   * Bump Standards-Version to 3.9.0.
 .
 redis (2:2.0.0~rc2-1) experimental; urgency=low
 .
   * New upstream RC release.
 .
 redis (2:2.0.0~rc1-2) experimental; urgency=low
 .
   * Add 'status' command to initscript.
   * Add redis-benchmark (and manpage) to package. (Closes: #587395)
 .
 redis (2:2.0.0~rc1-1) experimental; urgency=low
 .
   * New upstream release candidate.
   * Remove '01-dont-print-pid-on-startup.diff' patch.
   * Update local copy of redis.conf.
 .
 redis (2:1.2.6-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:1.2.5-1) unstable; urgency=low
 .
   * New upstream release.
   * Drop 02-fix-segfault-indupClientReplyValue.diff; applied upstream via
     <http://code.google.com/p/redis/issues/detail?id=177>.
 .
 redis (2:1.2.4-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:1.2.3-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (2:1.2.2-2) unstable; urgency=low
 .
   * Really fix segfault in dupClientReplyValue. (Closes: #570371)
 .
 redis (2:1.2.2-1) unstable; urgency=low
 .
   * New upstream release.
     - Fixes segfault in dupClientReplyValue. Thanks to Hirling Endre
       <endre@dawn.royalcomp.hu> (Closes: #570371)
 .
 redis (2:1.2.1-1) unstable; urgency=low
 .
   * New upstream release.
   * Add Bash completion script for redis-cli by Steve Kemp <skx@debian.org>.
     (Closes: #565358)
   * Bump Standards-Version to 3.8.4.
   * Add $remote_fs to LSB "Required-{Start,Stop}" initscript headers.
 .
 redis (2:1.2.0-1) unstable; urgency=low
 .
   * New upstream stable release.
   * Switch to dpkg-source 3.0 (quilt) format.
   * Patch out printing of pid on startup.
 .
 redis (2:1.1.95~beta-2) unstable; urgency=low
 .
   * Set source section to "database" from "misc".
   * Add redis-cli binary to "redis-server" package.
 .
 redis (2:1.1.95~beta-1) unstable; urgency=low
 .
   * New upstream release.
   * Sync debian/redis.conf with upstream version (new "rdbcompression" and
     "masterauth" commands).
 .
 redis (2:1.1.90~beta-1) unstable; urgency=low
 .
   * New upstream release:
     - Bump the epoch as dpkg considers 1.1.90 to be less than 1.02.
     - Sync redis.conf
   * Don't build client libraries anymore; not part of the upstream tarball
     anymore.
   * Don't export CFLAGS from debian/rules to prevent FTBFS when dpkg-provided
     CFLAGS does not include --std=c99.
   * Modify debian/watch to consider "-beta" the same as "~beta" for correct
     dpkg ordering.
 .
 redis (1:1.02-1) unstable; urgency=low
 .
   * New upstream release.
 .
 redis (1:1.01-1) unstable; urgency=low
 .
   * New upstream release.
     - "maxmemory now works well on 64bit systems with > 4GB of RAM"
 .
 redis (1:1.0-1) unstable; urgency=low
 .
   * New upstream release.
   * Bump Standards-Version to 3.8.3.
   * Drop patch system:
     - 01-recommend-sysctl-conf.diff; applied upstream.
     - 02-warn-after-daemonising.diff; applied upstream.
     - 03-only-mangle-trace-on-ia64-and-x86.diff; applied upstream.
     - Drop quilt Build-Depends and remove patches/series.
   * Use "override_dh_auto_clean" instead of "clean" target.
 .
 redis (1:0.900-3) unstable; urgency=low
 .
   * Actually add architecture patch introducted in 1:0.900-2 to quilt 'series'
     (Closes: #533763)
   * Correct "/proc/sys/vm/overcommit_memory" message to print the correct
     string to add to sysctl.conf.
 .
 redis (1:0.900-2) unstable; urgency=low
 .
   * Add patch to avoid mangling the stacktrace on SIGSEGV using X86-specific
     ucontext struct, etc. (Closes: #533763)
   * Bump Standards-Version to 3.8.2.
 .
 redis (1:0.900-1) unstable; urgency=low
 .
   * New upstream release.
     - Update debian/redis.conf
   * Update versionmangle in debian/watch.
   * "/proc/sys/vm/overcommit_memory" message:
     - Recommend modifying /etc/sysctl.conf instead of using "boot scripts"
     - Warn after daemonising to avoid message being spammed on every boot.
 .
 redis (1:0.100-1) unstable; urgency=low
 .
   * New upstream release.
     - Update debian/redis.conf
 .
 redis (1:0.096-1) unstable; urgency=low
 .
   * New upstream version.
 .
 redis (1:0.095-1) unstable; urgency=low
 .
   * New upstream version.
 .
 redis (1:0.094-3) unstable; urgency=low
 .
   * Really upload to unstable - I give "debchange -r" less credit than it
     deserves.
 .
 redis (1:0.094-2) experimental; urgency=low
 .
   * Upload to unstable.
   * Add libredis-perl package.
 .
 redis (1:0.094-1) experimental; urgency=low
 .
   * New upstream release.
   * Place libphp-redis package into 'php' section.
   * Update debian/copyright with new libraries.
   * Correct Vcs-Browser location.
Checksums-Sha1:
 6d734fa9ceeaf4f23a3479b4bd013f3e2e6e6474 1989 redis_3.0.4-1~bpo8+1.dsc
 e7c021028f4ee5e31e575a04b92049365651c88f 29500 redis_3.0.4-1~bpo8+1.debian.tar.xz
 717ebe0ff9347fb0ecfab2a582ef51df67b8c8a9 349620 redis-server_3.0.4-1~bpo8+1_amd64.deb
 07bd3d4ae2990db016e8441b733e3482d995530e 97504 redis-tools_3.0.4-1~bpo8+1_amd64.deb
 f58c2f899531d6ebd8c05717cd5225ff6e770680 15460 redis-sentinel_3.0.4-1~bpo8+1_amd64.deb
Checksums-Sha256:
 96fa790fb92fd8153d1fc8020117946dd39adaeebf2ff6a7c328dc0d436672f4 1989 redis_3.0.4-1~bpo8+1.dsc
 3519eb94e3fd3540e5c6bdec06d213aeb1c651cb51fa7d3c4d0e3563555b58e8 29500 redis_3.0.4-1~bpo8+1.debian.tar.xz
 69dd738d6ab6725c4fd2476c483e8c1f54618f7c40dcc0e27cde0fbf83b91be4 349620 redis-server_3.0.4-1~bpo8+1_amd64.deb
 21715f04e3b3550c5d088f54e6a3b3282aa5a5776566b20f1082587b6b7ad6a0 97504 redis-tools_3.0.4-1~bpo8+1_amd64.deb
 febdee87cd76784dd82be8a301ba4e97d161ca4ed9ab3c768883f4a722768af2 15460 redis-sentinel_3.0.4-1~bpo8+1_amd64.deb
Files:
 293cdc71e4fd9bf2741760ed12acaa6f 1989 database optional redis_3.0.4-1~bpo8+1.dsc
 7c12f817d4b64c0465d4e2323f150cb6 29500 database optional redis_3.0.4-1~bpo8+1.debian.tar.xz
 686bec0d7732cfe2ba01e2bcfc36f98f 349620 database optional redis-server_3.0.4-1~bpo8+1_amd64.deb
 b0499ff4b0a996ca943a44261dfa5741 97504 database optional redis-tools_3.0.4-1~bpo8+1_amd64.deb
 136ea9435aa44db1ff8242c4ccbe4d87 15460 database optional redis-sentinel_3.0.4-1~bpo8+1_amd64.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=4un6
-----END PGP SIGNATURE-----


Reply to: