linux-2.6_2.6.32-15~bpo50+1_amd64.changes is NEW
firmware-linux-free_2.6.32-15~bpo50+1_all.deb
to pool/main/l/linux-2.6/firmware-linux-free_2.6.32-15~bpo50+1_all.deb
linux-2.6_2.6.32-15~bpo50+1.diff.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.32-15~bpo50+1.diff.gz
linux-2.6_2.6.32-15~bpo50+1.dsc
to pool/main/l/linux-2.6/linux-2.6_2.6.32-15~bpo50+1.dsc
linux-base_2.6.32-15~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-base_2.6.32-15~bpo50+1_all.deb
linux-doc-2.6.32_2.6.32-15~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-doc-2.6.32_2.6.32-15~bpo50+1_all.deb
(new) linux-headers-2.6.32-bpo.5-all-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
All header files for Linux 2.6.32
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.32, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.32-bpo.5-all_2.6.32-15~bpo50+1_amd64.deb optional kernel
All header files for Linux 2.6.32
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.32, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.32-bpo.5-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
Header files for Linux 2.6.32-bpo.5-amd64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.32-bpo.5-amd64, generally used for building out-of-tree
kernel modules. These files are going to be installed into
/usr/src/linux-headers-2.6.32-bpo.5-amd64, and can be used for building
modules that load into the kernel provided by the
linux-image-2.6.32-bpo.5-amd64 package.
(new) linux-headers-2.6.32-bpo.5-common-openvz_2.6.32-15~bpo50+1_amd64.deb optional kernel
Common header files for Linux 2.6.32-bpo.5-openvz
This package provides the architecture-specific common kernel header files
for Linux kernel version 2.6.32-bpo.5-openvz, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.32-bpo.5-(flavour) package,
matching the flavour of the kernel you intend the build for.
(new) linux-headers-2.6.32-bpo.5-common-vserver_2.6.32-15~bpo50+1_amd64.deb optional kernel
Common header files for Linux 2.6.32-bpo.5-vserver
This package provides the architecture-specific common kernel header files
for Linux kernel version 2.6.32-bpo.5-vserver, generally used for
building out-of-tree kernel modules. To obtain a complete set of headers
you also need to install the linux-headers-2.6.32-bpo.5-(flavour)
package, matching the flavour of the kernel you intend the build for.
(new) linux-headers-2.6.32-bpo.5-common-xen_2.6.32-15~bpo50+1_amd64.deb optional kernel
Common header files for Linux 2.6.32-bpo.5-xen
This package provides the architecture-specific common kernel header files
for Linux kernel version 2.6.32-bpo.5-xen, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.32-bpo.5-(flavour) package,
matching the flavour of the kernel you intend the build for.
(new) linux-headers-2.6.32-bpo.5-common_2.6.32-15~bpo50+1_amd64.deb optional kernel
Common header files for Linux 2.6.32-bpo.5
This package provides the architecture-specific common kernel header files
for Linux kernel version 2.6.32-bpo.5, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.32-bpo.5-(flavour) package,
matching the flavour of the kernel you intend the build for.
(new) linux-headers-2.6.32-bpo.5-openvz-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
Header files for Linux 2.6.32-bpo.5-openvz-amd64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.32-bpo.5-openvz-amd64, generally used for building
out-of-tree kernel modules. These files are going to be installed into
/usr/src/linux-headers-2.6.32-bpo.5-openvz-amd64, and can be used for
building modules that load into the kernel provided by the
linux-image-2.6.32-bpo.5-openvz-amd64 package.
(new) linux-headers-2.6.32-bpo.5-vserver-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
Header files for Linux 2.6.32-bpo.5-vserver-amd64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.32-bpo.5-vserver-amd64, generally used for building
out-of-tree kernel modules. These files are going to be installed into
/usr/src/linux-headers-2.6.32-bpo.5-vserver-amd64, and can be used for
building modules that load into the kernel provided by the
linux-image-2.6.32-bpo.5-vserver-amd64 package.
(new) linux-headers-2.6.32-bpo.5-xen-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
Header files for Linux 2.6.32-bpo.5-xen-amd64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.32-bpo.5-xen-amd64, generally used for building
out-of-tree kernel modules. These files are going to be installed into
/usr/src/linux-headers-2.6.32-bpo.5-xen-amd64, and can be used for
building modules that load into the kernel provided by the
linux-image-2.6.32-bpo.5-xen-amd64 package.
(new) linux-image-2.6.32-bpo.5-amd64-dbg_2.6.32-15~bpo50+1_amd64.deb extra debug
Debugging infos for Linux 2.6.32-bpo.5-amd64
This package provides the binary debug image and pre-built debug loadable
modules for Linux kernel 2.6.32 on PCs with AMD64 or Intel 64 processors
machines.
(new) linux-image-2.6.32-bpo.5-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
Linux 2.6.32 for 64-bit PCs
The Linux kernel 2.6.32 and modules for use on PCs with AMD64 or Intel 64
processors.
.
This kernel also runs on a Xen hypervisor. It supports only unprivileged
(domU) operation.
(new) linux-image-2.6.32-bpo.5-openvz-amd64-dbg_2.6.32-15~bpo50+1_amd64.deb extra debug
Debugging infos for Linux 2.6.32-bpo.5-openvz-amd64
This package provides the binary debug image and pre-built debug loadable
modules for Linux kernel 2.6.32 on PCs with AMD64 or Intel 64 processors
machines.
(new) linux-image-2.6.32-bpo.5-openvz-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
Linux 2.6.32 for 64-bit PCs, OpenVZ support
The Linux kernel 2.6.32 and modules for use on PCs with AMD64 or Intel 64
processors.
.
This kernel includes support for OpenVZ container-based virtualization.
.
This kernel also runs on a Xen hypervisor. It supports only unprivileged
(domU) operation.
(new) linux-image-2.6.32-bpo.5-vserver-amd64-dbg_2.6.32-15~bpo50+1_amd64.deb extra debug
Debugging infos for Linux 2.6.32-bpo.5-vserver-amd64
This package provides the binary debug image and pre-built debug loadable
modules for Linux kernel 2.6.32 on PCs with AMD64 or Intel 64 processors
machines.
(new) linux-image-2.6.32-bpo.5-vserver-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
Linux 2.6.32 for 64-bit PCs, Linux-VServer support
The Linux kernel 2.6.32 and modules for use on PCs with AMD64 or Intel 64
processors.
.
This kernel includes support for Linux-VServer virtualization.
.
This kernel also runs on a Xen hypervisor. It supports only unprivileged
(domU) operation.
(new) linux-image-2.6.32-bpo.5-xen-amd64-dbg_2.6.32-15~bpo50+1_amd64.deb extra debug
Debugging infos for Linux 2.6.32-bpo.5-xen-amd64
This package provides the binary debug image and pre-built debug loadable
modules for Linux kernel 2.6.32 on PCs with AMD64 or Intel 64 processors
machines.
(new) linux-image-2.6.32-bpo.5-xen-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
Linux 2.6.32 for 64-bit PCs, Xen dom0 support
The Linux kernel 2.6.32 and modules for use on PCs with AMD64 or Intel 64
processors.
.
This kernel also runs on a Xen hypervisor. It supports both privileged
(dom0) and unprivileged (domU) operation.
linux-libc-dev_2.6.32-15~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-libc-dev_2.6.32-15~bpo50+1_amd64.deb
linux-manual-2.6.32_2.6.32-15~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-manual-2.6.32_2.6.32-15~bpo50+1_all.deb
linux-patch-debian-2.6.32_2.6.32-15~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-15~bpo50+1_all.deb
linux-source-2.6.32_2.6.32-15~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-source-2.6.32_2.6.32-15~bpo50+1_all.deb
(new) linux-support-2.6.32-bpo.5_2.6.32-15~bpo50+1_all.deb optional devel
Support files for Linux 2.6.32
This package provides support files for the Linux kernel build, e.g.
scripts to handle ABI information and for generation of build system meta
data.
(new) xen-linux-system-2.6.32-bpo.5-xen-amd64_2.6.32-15~bpo50+1_amd64.deb optional kernel
Xen system with Linux 2.6.32 on 64-bit PCs
This package depends on the binary Linux image and hypervisors.
Changes: linux-2.6 (2.6.32-15~bpo50+1) lenny-backports; urgency=low
.
* Rebuild for lenny.
.
linux-2.6 (2.6.32-15) unstable; urgency=low
.
[ Ben Hutchings ]
* [hppa] Ignore ABI change caused by disabling CONFIG_IDE_TIMINGS
* [powerpc] Fix unnecessary ABI change
.
[ Bastian Blank ]
* xen: Fix crash in netback.
.
linux-2.6 (2.6.32-14) unstable; urgency=low
.
[ Ben Hutchings ]
* [ia64] Hardcode the output of the scripts under arch/ia64/scripts so
that we can build out-of-tree modules correctly (refresh and re-add
dropped patch) (Closes: #392592)
* vlan/macvlan: propagate transmission state to upper layers
* macvlan: add GRO bit to features mask
* macvlan: allow multiple driver backends
* Add macvtap driver (Closes: #568755)
* [ia64] Enable SGI SN support and mspec driver (Closes: #582224)
* iwlwifi: Disable QoS when connected to a non-QoS-capable AP
(Closes: #578262)
* [x86] Disable e_powersaver cpufreq driver as unsafe. It has already
been blacklisted by cpufrequtils. The acpi-cpufreq driver can be used
instead on some VIA C7 systems. (Closes: #566208)
* nouveau: Fix fbcon corruption with font width not divisible by 8
(Closes: #583162)
* [amd64] ext4: Fix compat EXT4_IOC_ADD_GROUP (used by online resize)
* Install debug kernel image in /usr/lib/debug/boot (Closes: #582810)
* net: sysfs: Check for null ethtool_ops before getting speed/duplex
* Add stable 2.6.32.14:
- [hppa] Revert "parisc: Set PCI CLS early in boot.", erroneously
included in 2.6.32.13 causing FTBFS
- btrfs: check for read permission on src file in the clone ioctl
(CVE-2010-1636)
.
[ Bastian Blank ]
* Update Xen patch.
- Fix checksum offloading in netback. (closes: #583366)
.
[ maximilian attems]
* Add drm changes from stable 2.6.33.5:
- i915: Disable FBC on 915GM and 945GM (Closes: #582427)
* Update openvz patch to e7399c239fad.
.
[ Martin Michlmayr ]
* QNAP TS-419P: Export GPIO indicating jumper setting of JP1.
.
linux-2.6 (2.6.32-13) unstable; urgency=low
.
[ Frederik Schueler ]
* sparc: Fix use of uid16_t and gid16_t in asm/stat.h
.
[ Moritz Muehlenhoff ]
* Enable tomoyo (Closes: #562486)
.
[ maximilian attems]
* backport KVM: x86: Extend KVM_SET_VCPU_EVENTS with selective updates.
(closes: #580652)
* KEYS: find_keyring_by_name() can gain access to a freed keyring.
CVE-2010-1437
* hppa, sparc, powerpc disable BLK_DEV_CMD64X.
* topconfig enable PATA_CMD64X. (closes: #580799)
* x86: Disable CRYPTO_AES_NI_INTEL as it causes boot failures on T410.
* Add stable 2.6.32.13:
- [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error.
- [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4
I/O errors.
- [SCSI] skip sense logging for some ATA PASS-THROUGH cdbs
(Closes: #578129)
- raid6: fix recovery performance regression.
- raid456: Enable error-correction on singly-degraded RAID6
(Closes: #581392)
- r8169: fix broken register writes (Closes: #407217, #573007)
- V4L/DVB: budget: Fix crash in case of failure to attach frontend
(Closes: #575207)
* drm/edid: Fix 1024x768@85Hz.
.
[ Ben Hutchings ]
* linux-base: Fix typo in disk relabelling code (Closes: #580467)
* linux-base: Don't quote boot device name in elilo.conf
(Closes: #580710; works-around: #581173)
* rtl8192su: Add IDs for several more devices (Closes: #580740)
* Add drm and sfc changes from stable 2.6.33.4
* Improve workaround for HPAs (Host Protected Areas) overlapping
partitions, thanks to Tejun Heo:
- SCSI/libata: Disable HPA if it overlaps a partition (Closes: #572618)
- buffer: Make invalidate_bdev() drain all percpu LRU add caches
- block: Rescan partition tables after HPA is disabled
- libata: Disable HPA if it is only enabled after suspend
* V4L/DVB: budget: Select correct frontend drivers (Closes: #575223)
* 3c503: Fix IRQ probing (Closes: #566522)
* sis-agp: Remove SIS 760, handled by amd64-agp
* amd64-agp: Probe unknown AGP devices the right way (Closes: #548090)
.
[ Aurelien Jarno ]
* mips/swarm: fix boot from IDE based media (Sebastian Andrzej Siewior)
(closes: #466977).
* backport mips/swarm: fix M3 TLB exception handler.
* backport MIPS FPU emulator: allow Cause bits of FCSR to be writeable
by ctc1. (closes: #580602).
* mips/swarm: enable adm* hwmon drivers.
* backport Input: Add support of Synaptics Clickpad device (Closes: #572842)
.
[ Bastian Blank ]
* Fix symlinks in several packages.
* Update Xen patch.
* [amd64, i386/{686-bigmem,openvz-686,vserver-686-bigmem,xen-686}]
Build debugging symbols. (closes: #365349)
* Ignore crypto ABI changes.
.
[ Martin Michlmayr ]
* Backport GuruPlug support.
.
[ Christian Perrier ]
* Update debconf templates:
- English revised by the debian-l10n-english team as part of the Smith
review project (Closes: #578349)
- Vietnamese (Clytie Siddall) (Closes: #579234)
- German (Holger Wansing) (Closes: #579864)
- Russian (Yuri Kozlov) (Closes: #578994)
- Estonian (mihkel) (Closes: #579019)
- Czech (Michal Simunek) (Closes: #579268)
- Swedish (Martin Bagge) (Closes: #579308)
- French (David Prévot) (Closes: #579763)
- Spanish (Omar Campagne) (Closes: #580538)
- Portuguese (Américo Monteiro) (Closes: #577227)
- Japanese (Kenshi Muto) (Closes: #580855)
- Danish (Joe Hansen) (Closes: #580915)
- Czech (Michal Simunek) (Closes: #581399)
.
linux-2.6 (2.6.32-12) unstable; urgency=low
.
* The "Microwave Background" release
.
[ Ben Hutchings ]
* Prepare debconf templates for translation. (closes: #576758)
* [x86] PCI/forcedeth: Disable MSI for MCP55 on P5N32-E SLI
(Closes: #552299)
* phylib: Fix typo in bcm63xx PHY driver table
* linux-base: Fix bugs and improve libata transition code:
- Fix scope of _system() function (Closes: #576925)
- Fix case where a file may wrongly be listed as automatically converted
(Closes: #577047)
- Check device IDs in mdadm.conf rather than assuming it needs manual
conversion
- Use vol_id if available since the version of blkid in lenny does not
support the output format we need (Closes: #576608)
- Fix missing line breaks in updated crypttab (Closes: #577735)
* i915: Stop trying to use ACPI lid status to determine LVDS connection
(Closes: #577724)
* forcedeth: Fix hardware version check for TX bug workaround
(Closes: #572201)
* rndis_host: Poll status channel before control channel (Closes: #576929)
* megaraid_sas: Fix copying of sense data for 32-bit management tools on
64-bit kernel (Closes: #578398)
* Add ipheth driver for iPhone tethering
* virtio_net: Make delayed refill more reliable (Closes: #576838)
.
[ maximilian attems]
* [ia64] Built in fbcon.
* Update openvz patch to c05f95fcb04e. (closes: #574598)
* Reenable nouveau autoloading.
* reiserfs: Fix permissions on .reiserfs_priv. CVE-2010-1146
* libata,ata_piix: detect and clear spurious IRQs.
* libata/SCSI: fix locking around blk_abort_request().
* topconfig enable NET_DROP_MONITOR. (closes: #578568)
* Add stable 2.6.32.12:
- ACPI: EC: Allow multibyte access to EC; fixes temperature monitoring
on some Dell laptops (Closes: #563313)
- [x86] KVM: disable paravirt mmu reporting (Closes: #573071)
- thinkpad-acpi: lock down video output state access (Closes: #565790)
- xfs update (closes: #579410)
* Add drm changes from stable 2.6.33.3:
- drm/radeon: R300 AD only has one quad pipe (Closes: #575681)
* libata: Fix accesses at LBA28 boundary (old bug, but nasty) (v2)
* Add EC path for Thinkpad X100.
* Bump ABI to 5, apply:
- hrtimer: Tune hrtimer_interrupt hang logic
* Add libata TRIM support.
* Backport radeon r800 modesetting support.
* drm/radeon/kms: further spread spectrum fixes.
* Backport p54 fixes.
* net: export device speed and duplex via sysfs.
* postrm: rm modules.softdep. (closes: #579175)
* Backport KVM: Xen PV-on-HVM guest support.
* Backport KVM: x86: Add KVM_GET/SET_VCPU_EVENTS.
* hugetlb: fix infinite loop in get_futex_key() when backed by huge pages
* ext4: Issue the discard operation *before* releasing the blocks to be
reused.
* libiscsi: regression: fix header digest errors.
* Revert module.c and module.h changes from -stable update.
.
[ dann frazier ]
* Add DRBD backport
* sctp: Fix skb_over_panic resulting from multiple invalid parameter
errors (CVE-2010-1173)
* [CIFS] Allow null nd (as nfs server uses) on create (CVE-2010-1148)
* tipc: Fix oops on send prior to entering networked mode (CVE-2010-1187)
* [powerpc] KGDB: don't needlessly skip PAGE_USER test for Fsl booke
Note: KGDB is not currently enabled in debian builds (CVE-2010-1446)
.
[ Aurelien Jarno ]
* [sh4] Add a sh7751r flavour.
* [mips/*malta] Remove options that are present in topconfig.
.
[ Martin Michlmayr ]
* dns323-setup.c: fix WARN() when booting (Arnaud Patard).
* mips: enable PATA platform on SWARM and LITTLESUR (Sebastian Andrzej
Siewior).
* [mips/sb1-bcm91250a] Enable PATA_PLATFORM.
.
[ Bastian Blank ]
* Update Xen patch.
Override entries for your package:
firmware-linux-free_2.6.32-15~bpo50+1_all.deb - optional kernel
linux-2.6_2.6.32-15~bpo50+1.dsc - source devel
linux-base_2.6.32-15~bpo50+1_all.deb - optional kernel
linux-doc-2.6.32_2.6.32-15~bpo50+1_all.deb - optional doc
linux-libc-dev_2.6.32-15~bpo50+1_amd64.deb - optional devel
linux-manual-2.6.32_2.6.32-15~bpo50+1_all.deb - optional doc
linux-patch-debian-2.6.32_2.6.32-15~bpo50+1_all.deb - optional kernel
linux-source-2.6.32_2.6.32-15~bpo50+1_all.deb - optional kernel
Announcing to backports-changes@lists.backports.org
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
distributions.
Reply to: