Hello,
has anybody by chance advise for running Debian 13 on the espressobin v5?
I prepared an USB stick with
# cp debian-13.1.0-arm64-netinst.iso /dev/sdc
# sync
(and mounting on an amd64 system worked well).
I followed
https://wiki.espressobin.net/tiki-index.php?page=Boot+from+USB+-+Ubuntu
for setting up u-boot parameters, but I am stuck at
Marvell>> usb start
starting USB...
USB0: Register 2000104 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB1: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Marvell>> ext4ls usb 0:1
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Marvell>> ext4ls usb 0:0
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Marvell>> ext4ls usb 0:2
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Marvell>> ext4ls usb 1:0
** Bad device usb 1 **
Marvell>> ext4ls usb 1:1
** Bad device usb 1 **
Marvell>> ext4ls usb 1:2
** Bad device usb 1 **
Marvell>>
Is u-boot potentially too old to work with a Debian 13 installer image?
Marvell>> version
U-Boot 2017.03-armada-18.09.1-ga92bd86-armbian (Sep 05 2018 - 21:49:34 +0200)
aarch64-linux-gnu-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425
[linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701]
GNU ld (Linaro_Binutils-2018.05) 2.28.2.20170706
Marvell>>
If yes, how would I update u-boot? The device supports a bubt command:
Marvell>> help bubt
bubt - Burn a u-boot image to flash
Usage:
bubt [file-name] [destination [source]]
-file-name The image file name to burn. Default = flash-image.bin
-destination Flash to burn to [spi, nand, mmc, spinand]. Default =
active boot device
-source The source to load image from [tftp, usb, mmc]. Default
= tftp
Examples:
bubt - Burn flash-image.bin from tftp to active boot device
bubt flash-image-new.bin nand - Burn flash-image-new.bin from tftp to
NAND flash
bubt backup-flash-image.bin mmc usb - Burn backup-flash-image.bin from
usb to MMC
Marvell>>
and knows the SPI flash
Marvell>> sf probe
SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
Marvell>>
Many thanks
Rainer
--
Rainer Dorsch
http://bokomoko.de/Attachment:
signature.asc
Description: This is a digitally signed message part.