Debian Buster installer on qnap ts-21x / Fujitsu Q700 : /dev/mtdblock* missing
Package: linux
Version: 4.19.12-1
Hello Everyone,
I tried the latest Buster Installer on my Fujitsu Q700 (rebranded
qnap ts-21x) and Everything works except that /dev/mtdblock* devices
are missing so flashing the kernel and initrd fails.
Regards,
Lukas Straub
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.0-1-marvell (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-12)) #1 Debian 4.19.12-1 (2018-12-22)
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] OF: fdt: Machine model: QNAP TS219 family
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x4ac with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 504484K/524288K available (3943K kernel code, 342K rwdata, 1032K rodata, 304K init, 218K bss, 19804K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (3945 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) ( 304 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 343 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 219 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 18837 entries in 37 pages
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000038] Switching to timer-based delay loop, resolution 5ns
[ 0.000128] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.000150] pid_max: default: 32768 minimum: 301
[ 0.000420] Security Framework initialized
[ 0.000438] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000542] AppArmor: AppArmor initialized
[ 0.000673] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000693] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001652] CPU: Testing write buffer coherency: ok
[ 0.002622] Setting up static identity map for 0x8200 - 0x823c
[ 0.002856] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[ 0.004650] devtmpfs: initialized
[ 0.007845] VFP support v0.3: not present
[ 0.007994] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.008019] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.008382] pinctrl core: initialized pinctrl subsystem
[ 0.009458] NET: Registered protocol family 16
[ 0.009839] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.010448] audit: initializing netlink subsys (disabled)
[ 0.011192] cpuidle: using governor ladder
[ 0.011208] cpuidle: using governor menu
[ 0.011538] Feroceon L2: Enabling L2
[ 0.011580] Feroceon L2: Cache support initialised.
[ 0.011809] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[ 0.015587] No ATAGs?
[ 0.016074] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[ 0.019974] clocksource: Switched to clocksource orion_clocksource
[ 0.041981] VFS: Disk quotas dquot_6.6.0
[ 0.042070] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.042509] AppArmor: AppArmor Filesystem Enabled
[ 0.043616] NET: Registered protocol family 2
[ 0.044345] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.044374] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.044426] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.044476] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.044570] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.044593] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.044788] NET: Registered protocol family 1
[ 0.044818] PCI: CLS 0 bytes, default 32
[ 0.045040] Unpacking initramfs...
[ 1.023995] random: fast init done
[ 3.757700] Freeing initrd memory: 9216K
[ 3.758513] Initialise system trusted keyrings
[ 3.758685] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 3.763450] zbud: loaded
[ 3.765193] Key type asymmetric registered
[ 3.765205] Asymmetric key parser 'x509' registered
[ 3.765257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.765428] io scheduler noop registered
[ 3.765678] io scheduler cfq registered (default)
[ 3.767160] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 3.768746] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 3.768765] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.768778] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 3.768789] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 3.768871] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[ 3.769928] PCI: bus0: Fast back to back transfers disabled
[ 3.769943] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.770901] PCI: bus1: Fast back to back transfers enabled
[ 3.770917] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.771108] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 3.771625] mv_xor f1060800.xor: Marvell shared XOR driver
[ 3.800841] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 3.801008] mv_xor f1060900.xor: Marvell shared XOR driver
[ 3.828825] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 3.829179] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 3.830102] console [ttyS0] disabled
[ 3.830159] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 4.390438] console [ttyS0] enabled
[ 4.394499] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 4.404204] libphy: Fixed MDIO Bus: probed
[ 4.408342] i2c /dev entries driver
[ 4.413153] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.420142] registered taskstats version 1
[ 4.424279] Loading compiled-in X.509 certificates
[ 4.449399] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 4.459032] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.465725] hctosys: unable to open rtc device (rtc0)
[ 4.473454] Freeing unused kernel memory: 304K
[ 4.477944] This architecture does not have kernel memory protection.
[ 4.484426] Run /init as init process
[ 4.639228] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 4.745988] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 4.755931] libphy: orion_mdio_bus: probed
[ 4.795361] usbcore: registered new interface driver usbfs
[ 4.805575] SCSI subsystem initialized
[ 4.815754] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
[ 4.844342] usbcore: registered new interface driver hub
[ 4.860694] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:cc:dd:6c
[ 4.883719] usbcore: registered new device driver usb
[ 4.915471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.928211] libata version 3.00 loaded.
[ 4.930567] sata_mv f1080000.sata: version 1.28
[ 4.930806] sata_mv f1080000.sata: slots 32 ports 2
[ 4.981000] ehci-orion: EHCI orion driver
[ 4.987914] scsi host0: sata_mv
[ 5.000076] orion-ehci f1050000.ehci: EHCI Host Controller
[ 5.007141] scsi host1: sata_mv
[ 5.016886] ata1: SATA max UDMA/133 irq 35
[ 5.021043] ata2: SATA max UDMA/133 irq 35
[ 5.033928] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 5.043909] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 5.063994] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 5.070279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 5.078610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.085882] usb usb1: Product: EHCI Host Controller
[ 5.090800] usb usb1: Manufacturer: Linux 4.19.0-1-marvell ehci_hcd
[ 5.097113] usb usb1: SerialNumber: f1050000.ehci
[ 5.104037] hub 1-0:1.0: USB hub found
[ 5.107841] hub 1-0:1.0: 1 port detected
[ 5.443996] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 5.605528] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63
[ 5.613764] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.620967] usb 1-1: Product: USB2.0 Hub
[ 5.631588] hub 1-1:1.0: USB hub found
[ 5.635788] hub 1-1:1.0: 4 ports detected
[ 5.864010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 5.932036] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 5.938703] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.966305] ata1.00: configured for UDMA/133
[ 5.970949] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
[ 6.452010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 6.500035] ata2.00: ATA-8: WDC WD2500BPVT-80ZEST0, 01.01A01, max UDMA/133
[ 6.506959] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.520442] ata2.00: configured for UDMA/133
[ 6.525081] scsi 1:0:0:0: Direct-Access ATA WDC WD2500BPVT-8 1A01 PQ: 0 ANSI: 5
[ 6.561223] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 6.574973] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 6.582538] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 6.590532] sd 0:0:0:0: [sda] Write Protect is off
[ 6.595390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.595486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.604649] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.609482] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.609565] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.639188] sdb: sdb1
[ 6.643866] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.664502] sda: sda1
[ 6.669276] sd 0:0:0:0: [sda] Attached SCSI disk
[ 16.956117] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 16.956300] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 18.473913] NET: Registered protocol family 17
[ 18.631879] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 18.740746] random: crng init done
BusyBox v1.27.2 (Debian 1:1.27.2-3) built-in shell (ash)
Enter 'help' for a list of built-in commands.
~ # ls /dev
block cpu_dma_latency gpiochip1 mem port sda1 stdout zero
bsg disk i2c-0 memory_bandwidth ptmx sdb tty
bus fd input network_latency pts sdb1 ttyS0
char full kmsg network_throughput random stderr ttyS1
console gpiochip0 log null sda stdin urandom
~ # lsmod
Module Size Used by
af_packet 32382 0
ext4 512803 0
crc16 1293 1 ext4
mbcache 4400 1 ext4
jbd2 79489 1 ext4
crc32c_generic 1945 0
fscrypto 17256 1 ext4
ecb 2171 0
sd_mod 32078 0
ehci_orion 3765 0
sata_mv 26054 0
ehci_hcd 53205 1 ehci_orion
libata 173264 1 sata_mv
evdev 11411 0
scsi_mod 174479 2 sd_mod,libata
usbcore 159141 2 ehci_orion,ehci_hcd
mvmdio 4528 0
mv643xx_eth 27840 0
usb_common 3755 1 usbcore
nls_base 5869 1 usbcore
gpio_keys 7758 0
sha256_generic 9524 0
~ # uname -a
Linux debian 4.19.0-1-marvell #1 Debian 4.19.12-1 (2018-12-22) armv5tel GNU/Linux
~ #
Jan 1 00:00:06 syslogd started: BusyBox v1.27.2
Jan 1 00:00:06 kernel: klogd started: BusyBox v1.27.2 (Debian 1:1.27.2-3)
Jan 1 00:00:06 kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Jan 1 00:00:06 kernel: [ 0.000000] Linux version 4.19.0-1-marvell (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-12)) #1 Debian 4.19.12-1 (2018-12-22)
Jan 1 00:00:06 kernel: [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
Jan 1 00:00:06 kernel: [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
Jan 1 00:00:06 kernel: [ 0.000000] OF: fdt: Machine model: QNAP TS219 family
Jan 1 00:00:06 kernel: [ 0.000000] Memory policy: Data cache writeback
Jan 1 00:00:06 kernel: [ 0.000000] On node 0 totalpages: 131072
Jan 1 00:00:06 kernel: [ 0.000000] Normal zone: 1024 pages used for memmap
Jan 1 00:00:06 kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 00:00:06 kernel: [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
Jan 1 00:00:06 kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x4ac with crng_init=0
Jan 1 00:00:06 kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan 1 00:00:06 kernel: [ 0.000000] pcpu-alloc: [0] 0
Jan 1 00:00:06 kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
Jan 1 00:00:06 kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768
Jan 1 00:00:06 kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:06 kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:06 kernel: [ 0.000000] Memory: 504484K/524288K available (3943K kernel code, 342K rwdata, 1032K rodata, 304K init, 218K bss, 19804K reserved, 0K cma-reserved, 0K highmem)
Jan 1 00:00:06 kernel: [ 0.000000] Virtual kernel memory layout:
Jan 1 00:00:06 kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jan 1 00:00:06 kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Jan 1 00:00:06 kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
Jan 1 00:00:06 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Jan 1 00:00:06 kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Jan 1 00:00:06 kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Jan 1 00:00:06 kernel: [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (3945 kB)
Jan 1 00:00:06 kernel: [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) ( 304 kB)
Jan 1 00:00:07 kernel: [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 343 kB)
Jan 1 00:00:07 kernel: [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 219 kB)
Jan 1 00:00:07 kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan 1 00:00:07 kernel: [ 0.000000] ftrace: allocating 18837 entries in 37 pages
Jan 1 00:00:07 kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Jan 1 00:00:07 kernel: [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
Jan 1 00:00:07 kernel: [ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
Jan 1 00:00:07 kernel: [ 0.000038] Switching to timer-based delay loop, resolution 5ns
Jan 1 00:00:07 kernel: [ 0.000128] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
Jan 1 00:00:07 kernel: [ 0.000150] pid_max: default: 32768 minimum: 301
Jan 1 00:00:07 kernel: [ 0.000420] Security Framework initialized
Jan 1 00:00:07 kernel: [ 0.000438] Yama: disabled by default; enable with sysctl kernel.yama.*
Jan 1 00:00:07 kernel: [ 0.000542] AppArmor: AppArmor initialized
Jan 1 00:00:07 kernel: [ 0.000673] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.000693] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.001652] CPU: Testing write buffer coherency: ok
Jan 1 00:00:07 kernel: [ 0.002622] Setting up static identity map for 0x8200 - 0x823c
Jan 1 00:00:07 kernel: [ 0.002856] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
Jan 1 00:00:07 kernel: [ 0.004650] devtmpfs: initialized
Jan 1 00:00:07 kernel: [ 0.007845] VFP support v0.3: not present
Jan 1 00:00:07 kernel: [ 0.007994] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan 1 00:00:07 kernel: [ 0.008019] futex hash table entries: 256 (order: -1, 3072 bytes)
Jan 1 00:00:07 kernel: [ 0.008382] pinctrl core: initialized pinctrl subsystem
Jan 1 00:00:07 kernel: [ 0.009458] NET: Registered protocol family 16
Jan 1 00:00:07 kernel: [ 0.009839] DMA: preallocated 256 KiB pool for atomic coherent allocations
Jan 1 00:00:07 kernel: [ 0.010448] audit: initializing netlink subsys (disabled)
Jan 1 00:00:07 kernel: [ 0.011192] cpuidle: using governor ladder
Jan 1 00:00:07 kernel: [ 0.011208] cpuidle: using governor menu
Jan 1 00:00:07 kernel: [ 0.011538] Feroceon L2: Enabling L2
Jan 1 00:00:07 kernel: [ 0.011580] Feroceon L2: Cache support initialised.
Jan 1 00:00:07 kernel: [ 0.011809] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
Jan 1 00:00:07 kernel: [ 0.015587] No ATAGs?
Jan 1 00:00:07 kernel: [ 0.016074] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
Jan 1 00:00:07 kernel: [ 0.019974] clocksource: Switched to clocksource orion_clocksource
Jan 1 00:00:07 kernel: [ 0.041981] VFS: Disk quotas dquot_6.6.0
Jan 1 00:00:07 kernel: [ 0.042070] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.042509] AppArmor: AppArmor Filesystem Enabled
Jan 1 00:00:07 kernel: [ 0.043616] NET: Registered protocol family 2
Jan 1 00:00:07 kernel: [ 0.044345] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.044374] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:07 kernel: [ 0.044426] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:07 kernel: [ 0.044476] TCP: Hash tables configured (established 4096 bind 4096)
Jan 1 00:00:07 kernel: [ 0.044570] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.044593] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:07 kernel: [ 0.044788] NET: Registered protocol family 1
Jan 1 00:00:07 kernel: [ 0.044818] PCI: CLS 0 bytes, default 32
Jan 1 00:00:07 kernel: [ 0.045040] Unpacking initramfs...
Jan 1 00:00:07 kernel: [ 1.023995] random: fast init done
Jan 1 00:00:07 kernel: [ 3.757700] Freeing initrd memory: 9216K
Jan 1 00:00:07 kernel: [ 3.758513] Initialise system trusted keyrings
Jan 1 00:00:07 kernel: [ 3.758685] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Jan 1 00:00:07 kernel: [ 3.763450] zbud: loaded
Jan 1 00:00:07 kernel: [ 3.765193] Key type asymmetric registered
Jan 1 00:00:07 kernel: [ 3.765205] Asymmetric key parser 'x509' registered
Jan 1 00:00:07 kernel: [ 3.765257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Jan 1 00:00:07 kernel: [ 3.765428] io scheduler noop registered
Jan 1 00:00:07 kernel: [ 3.765678] io scheduler cfq registered (default)
Jan 1 00:00:07 kernel: [ 3.767160] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
Jan 1 00:00:07 kernel: [ 3.768746] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
Jan 1 00:00:07 kernel: [ 3.768765] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan 1 00:00:07 kernel: [ 3.768778] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
Jan 1 00:00:07 kernel: [ 3.768789] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
Jan 1 00:00:07 kernel: [ 3.768871] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
Jan 1 00:00:07 kernel: [ 3.769928] PCI: bus0: Fast back to back transfers disabled
Jan 1 00:00:07 kernel: [ 3.769943] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan 1 00:00:07 kernel: [ 3.770901] PCI: bus1: Fast back to back transfers enabled
Jan 1 00:00:07 kernel: [ 3.770917] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan 1 00:00:07 kernel: [ 3.771108] pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 1 00:00:07 kernel: [ 3.771625] mv_xor f1060800.xor: Marvell shared XOR driver
Jan 1 00:00:07 kernel: [ 3.800841] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
Jan 1 00:00:07 kernel: [ 3.801008] mv_xor f1060900.xor: Marvell shared XOR driver
Jan 1 00:00:07 kernel: [ 3.828825] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
Jan 1 00:00:07 kernel: [ 3.829179] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jan 1 00:00:07 kernel: [ 3.830102] console [ttyS0] disabled
Jan 1 00:00:07 kernel: [ 3.830159] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
Jan 1 00:00:07 kernel: [ 4.390438] console [ttyS0] enabled
Jan 1 00:00:07 kernel: [ 4.394499] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
Jan 1 00:00:07 kernel: [ 4.404204] libphy: Fixed MDIO Bus: probed
Jan 1 00:00:07 kernel: [ 4.408342] i2c /dev entries driver
Jan 1 00:00:07 kernel: [ 4.413153] ledtrig-cpu: registered to indicate activity on CPUs
Jan 1 00:00:07 kernel: [ 4.420142] registered taskstats version 1
Jan 1 00:00:07 kernel: [ 4.424279] Loading compiled-in X.509 certificates
Jan 1 00:00:07 kernel: [ 4.449399] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
Jan 1 00:00:07 kernel: [ 4.459032] AppArmor: AppArmor sha1 policy hashing enabled
Jan 1 00:00:07 kernel: [ 4.465725] hctosys: unable to open rtc device (rtc0)
Jan 1 00:00:07 kernel: [ 4.473454] Freeing unused kernel memory: 304K
Jan 1 00:00:07 kernel: [ 4.477944] This architecture does not have kernel memory protection.
Jan 1 00:00:07 kernel: [ 4.484426] Run /init as init process
Jan 1 00:00:07 kernel: [ 4.639228] input: gpio_keys as /devices/platform/gpio_keys/input/input0
Jan 1 00:00:07 kernel: [ 4.745988] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
Jan 1 00:00:07 kernel: [ 4.755931] libphy: orion_mdio_bus: probed
Jan 1 00:00:07 kernel: [ 4.795361] usbcore: registered new interface driver usbfs
Jan 1 00:00:07 kernel: [ 4.805575] SCSI subsystem initialized
Jan 1 00:00:07 kernel: [ 4.815754] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
Jan 1 00:00:07 kernel: [ 4.844342] usbcore: registered new interface driver hub
Jan 1 00:00:07 kernel: [ 4.860694] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:cc:dd:6c
Jan 1 00:00:07 kernel: [ 4.883719] usbcore: registered new device driver usb
Jan 1 00:00:07 kernel: [ 4.915471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 00:00:07 kernel: [ 4.928211] libata version 3.00 loaded.
Jan 1 00:00:07 kernel: [ 4.930567] sata_mv f1080000.sata: version 1.28
Jan 1 00:00:07 kernel: [ 4.930806] sata_mv f1080000.sata: slots 32 ports 2
Jan 1 00:00:07 kernel: [ 4.981000] ehci-orion: EHCI orion driver
Jan 1 00:00:07 kernel: [ 4.987914] scsi host0: sata_mv
Jan 1 00:00:07 kernel: [ 5.000076] orion-ehci f1050000.ehci: EHCI Host Controller
Jan 1 00:00:07 kernel: [ 5.007141] scsi host1: sata_mv
Jan 1 00:00:07 kernel: [ 5.016886] ata1: SATA max UDMA/133 irq 35
Jan 1 00:00:07 kernel: [ 5.021043] ata2: SATA max UDMA/133 irq 35
Jan 1 00:00:07 kernel: [ 5.033928] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
Jan 1 00:00:07 kernel: [ 5.043909] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
Jan 1 00:00:07 kernel: [ 5.063994] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
Jan 1 00:00:07 kernel: [ 5.070279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
Jan 1 00:00:07 kernel: [ 5.078610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 1 00:00:07 kernel: [ 5.085882] usb usb1: Product: EHCI Host Controller
Jan 1 00:00:07 kernel: [ 5.090800] usb usb1: Manufacturer: Linux 4.19.0-1-marvell ehci_hcd
Jan 1 00:00:07 kernel: [ 5.097113] usb usb1: SerialNumber: f1050000.ehci
Jan 1 00:00:07 kernel: [ 5.104037] hub 1-0:1.0: USB hub found
Jan 1 00:00:07 kernel: [ 5.107841] hub 1-0:1.0: 1 port detected
Jan 1 00:00:07 kernel: [ 5.443996] usb 1-1: new high-speed USB device number 2 using orion-ehci
Jan 1 00:00:07 kernel: [ 5.605528] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63
Jan 1 00:00:07 kernel: [ 5.613764] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 1 00:00:07 kernel: [ 5.620967] usb 1-1: Product: USB2.0 Hub
Jan 1 00:00:07 kernel: [ 5.631588] hub 1-1:1.0: USB hub found
Jan 1 00:00:07 kernel: [ 5.635788] hub 1-1:1.0: 4 ports detected
Jan 1 00:00:07 kernel: [ 5.864010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
Jan 1 00:00:07 kernel: [ 5.932036] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
Jan 1 00:00:07 kernel: [ 5.938703] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan 1 00:00:07 kernel: [ 5.966305] ata1.00: configured for UDMA/133
Jan 1 00:00:07 kernel: [ 5.970949] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
Jan 1 00:00:07 kernel: [ 6.452010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
Jan 1 00:00:07 kernel: [ 6.500035] ata2.00: ATA-8: WDC WD2500BPVT-80ZEST0, 01.01A01, max UDMA/133
Jan 1 00:00:07 kernel: [ 6.506959] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan 1 00:00:07 kernel: [ 6.520442] ata2.00: configured for UDMA/133
Jan 1 00:00:07 kernel: [ 6.525081] scsi 1:0:0:0: Direct-Access ATA WDC WD2500BPVT-8 1A01 PQ: 0 ANSI: 5
Jan 1 00:00:07 kernel: [ 6.561223] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
Jan 1 00:00:07 kernel: [ 6.574973] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
Jan 1 00:00:07 kernel: [ 6.582538] sd 1:0:0:0: [sdb] 4096-byte physical blocks
Jan 1 00:00:07 kernel: [ 6.590532] sd 0:0:0:0: [sda] Write Protect is off
Jan 1 00:00:07 kernel: [ 6.595390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 1 00:00:07 kernel: [ 6.595486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 00:00:07 kernel: [ 6.604649] sd 1:0:0:0: [sdb] Write Protect is off
Jan 1 00:00:07 kernel: [ 6.609482] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan 1 00:00:07 kernel: [ 6.609565] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 00:00:07 kernel: [ 6.639188] sdb: sdb1
Jan 1 00:00:07 kernel: [ 6.643866] sd 1:0:0:0: [sdb] Attached SCSI disk
Jan 1 00:00:07 kernel: [ 6.664502] sda: sda1
Jan 1 00:00:07 kernel: [ 6.669276] sd 0:0:0:0: [sda] Attached SCSI disk
Jan 1 00:00:10 preseed: successfully loaded preseed file from file:///preseed.cfg
Jan 1 00:00:13 init: starting pid 817, tty '': '/sbin/reopen-console /sbin/debian-installer'
Jan 1 00:00:13 debconf: Setting debconf/language to en
Jan 1 00:00:13 main-menu[833]: INFO: Menu item 'ethdetect' selected
Jan 1 00:00:14 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Jan 1 00:00:15 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Jan 1 00:00:15 apt-install: Queueing package udev for later installation
Jan 1 00:00:15 apt-install: Queueing package pciutils for later installation
Jan 1 00:00:15 apt-install: Queueing package usbutils for later installation
Jan 1 00:00:15 hw-detect: Missing modules 'usb-storage (USB storage)
Jan 1 00:00:16 check-missing-firmware: looking at dmesg for the first time
Jan 1 00:00:16 check-missing-firmware: saving timestamp for a later use: [ 6.669276]
Jan 1 00:00:16 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Jan 1 00:00:16 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping
Jan 1 00:00:16 check-missing-firmware: no missing firmware in loaded kernel modules
Jan 1 00:00:16 check-missing-firmware: taking network interface -n up/down
Jan 1 00:00:16 check-missing-firmware: taking network interface eth0 up/down
Jan 1 00:00:16 kernel: [ 16.956117] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan 1 00:00:16 kernel: [ 16.956300] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
Jan 1 00:00:17 check-missing-firmware: looking at dmesg again, restarting from \[ 6.669276\]
Jan 1 00:00:18 check-missing-firmware: timestamp found, truncating dmesg accordingly
Jan 1 00:00:18 check-missing-firmware: saving timestamp for a later use: [ 16.956300]
Jan 1 00:00:18 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Jan 1 00:00:18 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping
Jan 1 00:00:18 check-missing-firmware: no missing firmware in loaded kernel modules
Jan 1 00:00:18 main-menu[833]: (process:861): ip: SIOCGIFFLAGS: No such device
Jan 1 00:00:18 main-menu[833]: (process:861): ip: SIOCGIFFLAGS: No such device
Jan 1 00:00:18 main-menu[833]: INFO: Menu item 'netcfg' selected
Jan 1 00:00:18 main-menu[833]: INFO: Falling back to the package description for crypto-modules-4.19.0-1-marvell-di
Jan 1 00:00:18 main-menu[833]: INFO: Falling back to the package description for crypto-modules-4.19.0-1-marvell-di
Jan 1 00:00:18 netcfg[1094]: INFO: Starting netcfg v.1.157
Jan 1 00:00:18 netcfg[1094]: WARNING **: Couldn't read Wpasupplicant pid file, not trying to kill.
Jan 1 00:00:18 netcfg[1094]: INFO: Could not find valid BOOTIF= entry in /proc/cmdline
Jan 1 00:00:18 netcfg[1094]: INFO: Taking down interface eth0
Jan 1 00:00:18 netcfg[1094]: INFO: Taking down interface lo
Jan 1 00:00:18 kernel: [ 18.473913] NET: Registered protocol family 17
Jan 1 00:00:18 netcfg[1094]: INFO: Activating interface eth0
Jan 1 00:00:18 netcfg[1094]: DEBUG: State is now 0
Jan 1 00:00:18 netcfg[1094]: DEBUG: Want link on eth0
Jan 1 00:00:18 netcfg[1094]: INFO: Waiting time set to 3
Jan 1 00:00:18 kernel: [ 18.631879] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan 1 00:00:18 kernel: [ 18.740746] random: crng init done
Jan 1 00:00:18 netcfg[1094]: INFO: ethtool-lite: eth0: carrier up
Jan 1 00:00:18 netcfg[1094]: INFO: Found link on eth0
Jan 1 00:00:18 netcfg[1094]: DEBUG: Commencing network autoconfiguration on eth0
Jan 1 00:00:18 netcfg[1094]: DEBUG: rdnssd started; PID: 1109
Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff
Jan 1 00:00:21 netcfg[1094]: INFO: No IPv6 support found... how does that happen?
Jan 1 00:00:21 netcfg[1094]: DEBUG: Stopping rdnssd, PID 1109
Jan 1 00:00:21 netcfg[1094]: DEBUG: No RA received; attempting IPv4 autoconfig
Jan 1 00:00:21 netcfg[1094]: WARNING **: Started DHCP client; PID is 1135
Jan 1 00:00:22 udhcpc: Got IP 192.168.223.15 (using eth0) and routing through 192.168.223.10
Jan 1 00:00:25 netcfg[1094]: DEBUG: Reading domain name returned via DHCP
Jan 1 00:00:25 netcfg[1094]: DEBUG: Reading nameservers from /etc/resolv.conf
Jan 1 00:00:25 netcfg[1094]: DEBUG: Read nameserver 192.168.223.10
Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 1
Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 2
Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 5
Jan 1 00:00:25 netcfg[1094]: DEBUG: Using DNS to try and obtain default hostname
Jan 1 00:00:25 netcfg[1094]: DEBUG: Getting default hostname from rDNS lookup of autoconfigured address 192.168.223.15
Jan 1 00:00:25 netcfg[1094]: DEBUG: getnameinfo() returned -2 (Name or service not known)
Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 6
Jan 1 00:00:25 netcfg[1094]: DEBUG: Network config complete
Jan 1 00:00:25 netcfg[1094]: DEBUG: No interface given; clearing /etc/network/interfaces
Jan 1 00:00:25 netcfg[1094]: DEBUG: Writing informative header
Jan 1 00:00:25 netcfg[1094]: DEBUG: Success!
Jan 1 00:00:25 netcfg[1094]: DEBUG: Writing loopback interface
Jan 1 00:00:25 netcfg[1094]: DEBUG: Success!
Jan 1 00:00:25 netcfg[1094]: DEBUG: Writing DHCP stanza for eth0
Jan 1 00:00:25 netcfg[1094]: INFO: Detected eth0 as a hotpluggable device
Jan 1 00:00:25 netcfg[1094]: DEBUG: Success!
Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: started, v1.27.2
Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: sending discover
Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: sending select for 192.168.223.15
Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: lease of 192.168.223.15 obtained, lease time 3600
Jan 1 00:00:26 main-menu[833]: INFO: Menu item 'network-console' selected
Jan 1 00:00:28 sshd[1200]: Server listening on 0.0.0.0 port 22.
Jan 1 00:00:28 apt-install: Queueing package openssh-server for later installation
Jan 1 00:01:15 sshd[1226]: Connection closed by 192.168.223.10 port 41012 [preauth]
Jan 1 00:01:28 sshd[1229]: Accepted password for installer from 192.168.223.10 port 41014 ssh2
Jan 1 00:01:28 sshd[1232]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Jan 1 00:01:28 sshd[1232]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Jan 1 00:01:29 debconf: Setting debconf/language to en
Jan 1 00:03:36 sshd[1229]: syslogin_perform_logout: logout() returned an error
Jan 1 00:03:36 sshd[1229]: Received disconnect from 192.168.223.10 port 41014:11: disconnected by user
Jan 1 00:03:36 sshd[1229]: Disconnected from user installer 192.168.223.10 port 41014
Jan 1 00:04:06 sshd[1258]: Accepted password for root from 192.168.223.10 port 41016 ssh2
Jan 1 00:04:07 sshd[1258]: Received disconnect from 192.168.223.10 port 41016:11: disconnected by user
Jan 1 00:04:07 sshd[1258]: Disconnected from user root 192.168.223.10 port 41016
Jan 1 00:04:28 sshd[1263]: Accepted password for root from 192.168.223.10 port 41018 ssh2
Reply to: