Re: InstallingDebianOn/Allwinner

Hi,

i recompiled your wip-bootloader and it suddenly worked! I could start the installer BUT

the installer don't recognize my sata hdd. In u-boot the hdd is recognized!

Do you mean the u-boot from: https://packages.debian.org/es/sid/armhf/u-boot/download?

How do i install it on my sd-card(where i have the bootloader)?

Normaly i followed: "http://linux-sunxi.org/U-Boot" to compile the bootloader, then i get a "

u-boot-sunxi-with-spl.bin" which i then write on

the sdcard(http://linux-sunxi.org/Bootable_SD_card).

But when i want to compile the "2014.04+dfsg1-1" u-boot, i cannot find the cubietruck board in the boards.cfg!

My boot.scr looks exactly like in the tutorial: "https://wiki.debian.org/InstallingDebianOn/Allwinner#Installing_to_SATA"

Best Regards

Michael

2014-07-03 9:40 GMT+02:00 Ian Campbell <ijc@hellion.org.uk>:

I'd like to CC debian-arm@lists.debian.org on this thread. If that's OK
with you please could you add the CC on your next reply.

On Wed, 2014-07-02 at 23:34 +0200, Michi Ti wrote:
> Hello,
>
>
> i worked throught your tutorial:
> (https://wiki.debian.org/InstallingDebianOn/Allwinner)
>
>
> to install debian on SATA with the mainline kernel on my
> cubietruck(a20)
>
>
> but i stucks on loading the kernel for the installer:
>
> My Log at hastebin:
> http://hastebin.com/uxadedacol.coffee
>
>
> I used the following bootloader:
> git://gitorious.org/ijc/u-boot.git sunxi-mainlining-with-smp-and-ahci-wip
>
>
> i hope you can give me some hint or help?

Unfortunately everything looks normal to me, up to the point where it
goes silent instead of booting :-/.

Can you show the contents of your boot.scr please and confirm which URLs
you downloaded everything from.

One other thing to try would be to use u-boot 2014.04+dfsg1-1 from the
Debian archive instead of the WIP one from my tree (which should be good
but I don't really remember).

Ian.