Re: Information needed from owners/users of Debian on ARM/kirkwood base QNAP devices (should take < 1min to gather)

[Björn Wetterbom <bjorn@wetterbom.se>]

On Tue, Jun 17, 2014 at 9:49 AM, Ian Campbell <ijc@hellion.org.uk> wrote:

Hello,

TL;DR: Please run the attached kirkwood-qnap script on your ARM based
QNAP systems as "./kirkwood-qnap --info" and report the results in this
thread along with the model/kind of your QNAP device (as precisely as
you can).

---- Device # 1: Qnap TS-419P II ----

$ ./kirkwood-qnap --info

Kernel:         Linux rockan 3.2.0-4-kirkwood #1 Debian 3.2.57-3+deb7u2 armv5tel GNU/Linux

cpuinfo:        Hardware        : QNAP TS-41x

dt model:       n/a

PCI devices:

00:00.0 0600: 11ab:6282 (rev 01)

00:01.0 0100: 11ab:7042 (rev 02)

01:00.0 0600: 11ab:6282 (rev 01)

01:01.0 0c03: 1b6f:7023 (rev 01)

PHY devices (/sys/bus/mdio_bus/devices/):

0:00  0:01

Soc Bus:        n/a

QNAP TS-41x

kirkwood-qnap: machine: QNAP TS-41x

kirkwood-qnap: success: PCI => kirkwood-ts419-6282.dtb

kirkwood-qnap: success: PHY => kirkwood-ts419-6282.dtb

---- Device # 2: Qnap TS-119 ----

$ ./kirkwood-qnap --info

Kernel:         Linux geten 3.2.0-4-kirkwood #1 Debian 3.2.57-3+deb7u2 armv5tel GNU/Linux

cpuinfo:        Hardware        : QNAP TS-119/TS-219

dt model:       n/a

PCI devices:

PHY devices (/sys/bus/mdio_bus/devices/):

0:08

Soc Bus:        n/a

QNAP TS-119/TS-219

kirkwood-qnap: machine: QNAP TS-119/TS-219

kirkwood-qnap: success: PHY => kirkwood-ts219-6281.dtb