Re: Information needed from owners/users of Debian on ARM/kirkwood base QNAP devices (should take < 1min to gather)
On 17 Jun 2014, at 09:49, Ian Campbell <ijc@hellion.org.uk> wrote:
> Hello,
>
> TL;DR: Please run the attached kirkwood-qnap script on your ARM based
> QNAP systems as "./kirkwood-qnap --info" and report the results in this
> thread along with the model/kind of your QNAP device (as precisely as
> you can). The script does not need to be run as root and gathers
> information about the hardware platform and kernel version only, it is
> non-destructive (even if run without the --info, so don't worry).
>
QNAP TS-121
Kernel: Linux wheeler 3.14-1-kirkwood #1 Debian 3.14.4-1 (2014-05-13) armv5tel GNU/Linux
cpuinfo: Hardware : QNAP TS-119/TS-219
dt model: n/a
PCI devices:
00:00.0 0600: 11ab:6282 (rev 01)
01:00.0 0600: 11ab:6282 (rev 01)
01:01.0 0c03: 1b6f:7023 (rev 01)
PHY devices (/sys/bus/mdio_bus/devices/):
orion-mdio-mii:00
Soc Bus: n/a
kirkwood-qnap: machine: QNAP TS-119/TS-219
kirkwood-qnap: success: PCI => kirkwood-ts219-6282.dtb
kirkwood-qnap: success: PHY => kirkwood-ts219-6282.dtb
Reply to: