[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Information needed from owners/users of Debian on ARM/kirkwood base QNAP devices (should take < 1min to gather)



On Tuesday 17 June 2014 08:49:21 Ian Campbell wrote:
> Hello,
> 
> TL;DR: Please run the attached kirkwood-qnap script on your ARM based
> QNAP systems as "./kirkwood-qnap --info" and report the results in this
> thread along with the model/kind of your QNAP device (as precisely as
> you can). The script does not need to be run as root and gathers
> information about the hardware platform and kernel version only, it is
> non-destructive (even if run without the --info, so don't worry).

For a QNAP TS-420:

Kernel:         Linux nas 3.14-1-kirkwood #1 Debian 3.14.4-1 (2014-05-13) 
armv5tel GNU/Linux
cpuinfo:        Hardware        : QNAP TS-41x
dt model:       n/a

PCI devices:
00:00.0 0600: 11ab:6282 (rev 01)
00:01.0 0100: 11ab:7042 (rev 02)
01:00.0 0600: 11ab:6282 (rev 01)
01:01.0 0c03: 1b6f:7023 (rev 01)

PHY devices (/sys/bus/mdio_bus/devices/):
orion-mdio-mii:00  orion-mdio-mii:01

Soc Bus:        n/a

kirkwood-qnap: machine: QNAP TS-41x
kirkwood-qnap: success: PCI => kirkwood-ts419-6282.dtb
kirkwood-qnap: success: PHY => kirkwood-ts419-6282.dtb


Reply to: