Re: Information needed from owners/users of Debian on ARM/kirkwood base QNAP devices (should take < 1min to gather)
On Tue, Jun 17, 2014 at 9:49 AM, Ian Campbell <ijc@hellion.org.uk> wrote:
> Hello,
>
> TL;DR: Please run the attached kirkwood-qnap script on your ARM based
> QNAP systems as "./kirkwood-qnap --info" and report the results in this
> thread along with the model/kind of your QNAP device (as precisely as
> you can). The script does not need to be run as root and gathers
> information about the hardware platform and kernel version only, it is
> non-destructive (even if run without the --info, so don't worry).
------ machine QNAP TS-219 (non P / big housing) ------
Kernel: Linux qnap.eppo.yi.org 3.14-0.bpo.1-kirkwood #1 Debian
3.14.5-1~bpo70+1 (2014-06-05) armv5tel GNU/Linux
cpuinfo: Hardware : QNAP TS-119/TS-219
dt model: n/a
PCI devices:
00:00.0 0600: 11ab:6281 (rev 02)
PHY devices (/sys/bus/mdio_bus/devices/):
orion-mdio-mii:08
Soc Bus: n/a
kirkwood-qnap: machine: QNAP TS-119/TS-219
kirkwood-qnap: success: PCI => kirkwood-ts219-6281.dtb
kirkwood-qnap: success: PHY => kirkwood-ts219-6281.dtb
Reply to: