[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

thermaltake muse nas-raid n0001ln



Hello


I get RAID like in topic. Here's link to producers site. I want to change it's standard system to debian, freenas or other distribution which will allow me to use SSH, FTP, DLNA, NFS, CIFS but I'm total noob in that thing so I don't know from what to start. I've found some information on debian mailing lists that somebody tried to do it but I haven't found information if he succeeded.

Current system snapshots:

# uname -a
Linux MNAS4100 2.6.10-iop1 #135 Tue Apr 4 18:11:39 CST 2006 armv5tel unknown

# cat /proc/cpuinfo
Processor       : XScale-IOP8032x Family rev 0 (v5l)
BogoMIPS        : 399.76
cpu MHz         : 399.769
Features        : swp half thumb fastmult edsp
CPU implementer : 0x69
CPU architecture: 5TE
CPU variant     : 0x0
CPU part        : 0x2e2
CPU revision    : 0
Cache type      : undefined 5
Cache clean     : undefined 5
Cache lockdown  : undefined 5
Cache format    : Harvard
I size          : 32768
I assoc         : 32
I line length   : 32
I sets          : 32
D size          : 32768
D assoc         : 32
D line length   : 32
D sets          : 32

Hardware        : Intel IQ31244
Revision        : 0000
Serial          : 0000000000000000

# cat /proc/interrupts
           CPU0
  0:          0   IOP321 DMA 0 EOT
  1:          0   IOP321 DMA 0 E0C
  2:          0   IOP321 DMA 1 EOT
  3:          0   IOP321 DMA 1 E0C
  9:      46631   IOP321 Timer Tick
 11:         33   IOP321 i2c biu adapter 0
 12:         35   IOP321 i2c biu adapter 1
 20:          0   IOP321 DMA 0 ERR
 21:          0   IOP321 DMA 1 ERR
 27:       1665   eth0
 28:      22635   serial
 29:      15755   GD31244
 31:          0   pic16f8x
Err:          0

# cat /proc/meminfo
MemTotal:       255940 kB
MemFree:        196440 kB
Buffers:          3468 kB
Cached:          20676 kB
SwapCached:          0 kB
Active:          22304 kB
Inactive:         9824 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       255940 kB
LowFree:        196440 kB
SwapTotal:      263072 kB
SwapFree:       263072 kB
Dirty:              52 kB
Writeback:           0 kB
Mapped:          14516 kB
Slab:             8152 kB
CommitLimit:    391040 kB
Committed_AS:   121732 kB
PageTables:        592 kB
VmallocTotal:   745472 kB
VmallocUsed:     10656 kB
VmallocChunk:  3907584 kB

# cat /proc/pci
PCI devices found:
  Bus  0, device   1, function  0:
    Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 5).
      IRQ 27.
      Master Capable.  No bursts.  Min Gnt=255.
      Non-prefetchable 32 bit memory at 0x80000000 [0x8001ffff].
      Non-prefetchable 32 bit memory at 0x80020000 [0x8003ffff].
      I/O at 0xfe000000 [0xfe00003f].
  Bus  0, device   3, function  0:
    Class 0106: Intel Corp. GD31244 PCI-X SATA HBA (rev 0).
      IRQ 29.
      Master Capable.  No bursts.  Min Gnt=16.Max Lat=1.
      Non-prefetchable 64 bit memory at 0x80060000 [0x80060fff].

Currently only way to administrate it is through telnet or website. It has RS-232 but I don't have cable to connect it.

Can somebody help me with it?


Pozdrawiam / Regards
Marcin Sojka



Reply to: