Re: SS4000E Kernel v3.4 Config
"Chris Wilkinson" <firstname.lastname@example.org> writes:
> Continuing this quest to move my kernel to 3.4 so I can use Arnaud's LED
> patches. This problem with v3.4 kernel failing to detect the network card
> seems to be inherent in 3.4.
> Latest attempt was to install using the daily-images
> http://d-i.debian.org/daily-images/armel/daily/iop32x/netboot/ss4000e/. This
> results in kernel v18.104.22.168 which detects the n/w card fine, d-i completes
> and it boots no problem. From the boot trace, the n/w driver used is
> [ 13.750000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network
> CONFIG_E1000 is the flag in kernel .config.
> I then copied config-2.6.32-5-iop32x that was put in /boot to configure the
> 3.4 kernel without any of Arnaud's patches. This builds fine and yields a
> zImage of 1.5MB but also fails to detect the n/w card. It's also the same
> using the _defconfig extracted from the deb at
> I used the initrd.gz from the daily-images. I wonder if this is the problem?
the network driver is in module so you need to find a way to load it
while installing with d-i. Given that the zImage size is 1.5MB, maybe
you can try putting the ethernet driver built-in instead of module to
workaround that ?