I've been trying for ages to try and get my T-Mobile E220 modem working
on my Linksys NSLU2 but I can't for love nor money and hoping someone on here can help me,
here's some info.... 2.6.26-2-ixp4xx #1 Mon Jun 21 20:07:59 UTC 2010 armv5tel GNU/Linux dmesg [42998568.940000] usb 3-1: new full speed USB device using ohci_hcd and address 2 [42998569.130000] usb 3-1: configuration #1 chosen from 1 choice [42998569.140000] scsi1 : SCSI emulation for USB Mass Storage devices [42998569.160000] usb 3-1: New USB device found, idVendor=12d1, idProduct=1003 [42998569.160000] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [42998569.170000] usb 3-1: Product: HUAWEI Mobile [42998569.180000] usb 3-1: Manufacturer: HUAWEI Technologies [42998569.180000] usb 3-1: USB disconnect, address 2 [42998569.190000] usb-storage: device found at 2 [42998569.190000] usb-storage: waiting for device to settle before scanning [42998569.940000] usb 3-1: new full speed USB device using ohci_hcd and address 3 [42998570.120000] usb 3-1: configuration #1 chosen from 1 choice [42998570.130000] usb-storage: probe of 3-1:1.0 failed with error -5 [42998570.150000] usb-storage: probe of 3-1:1.1 failed with error -5 [42998570.170000] scsi4 : SCSI emulation for USB Mass Storage devices [42998570.190000] usb 3-1: New USB device found, idVendor=12d1, idProduct=1003 [42998570.190000] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [42998570.200000] usb 3-1: Product: HUAWEI Mobile [42998570.210000] usb 3-1: Manufacturer: HUAWEI Technologies [42998570.220000] usb-storage: device found at 3 [42998570.220000] usb-storage: waiting for device to settle before scanning [42998573.100000] usbcore: registered new interface driver usbserial [42998573.110000] usbserial: USB Serial support registered for generic [42998573.110000] usbcore: registered new interface driver usbserial_generic [42998573.120000] usbserial: USB Serial Driver core [42998573.280000] usbserial: USB Serial support registered for GSM modem (1-port) [42998573.290000] option 3-1:1.0: GSM modem (1-port) converter detected [42998573.300000] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [42998573.300000] option 3-1:1.1: GSM modem (1-port) converter detected [42998573.310000] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [42998573.320000] usbcore: registered new interface driver option [42998573.320000] option: USB Driver for GSM modems: v0.7.2 [42998575.220000] usb-storage: device scan complete [42998575.230000] scsi 4:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [42998575.900000] Driver 'sr' needs updating - please use bus_type methods [42998575.960000] sr0: scsi-1 drive [42998575.960000] Uniform CD-ROM driver Revision: 3.20 [42998575.970000] sr 4:0:0:0: Attached scsi CD-ROM sr0 [42998576.330000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [42998576.330000] sr 4:0:0:0: Attached scsi generic sg1 type 5 lsusb Bus 003 Device 003: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem wvdialconf ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- OK ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei ttyUSB0<*1>: Speed 9600: AT -- OK ttyUSB0<*1>: Max speed is 9600; that should be safe. ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- OK ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: huawei ttyUSB1<*1>: Speed 9600: AT -- OK ttyUSB1<*1>: Max speed is 9600; that should be safe. ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB0. Modem configuration written to /etc/wvdial.conf. ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. wvdial: utils/wvtask.cc:198: WvTaskMan::WvTaskMan(): Assertion `getcontext(&get_stack_return) == 0' failed. Aborted I found this page http://www.nslu2-linux.org/wiki/HowTo/AddUsb3gModem step 6 says 6. Disable the CD-drive portion of the E220 rmmod usb-storage Get a free e-mail account with Hotmail. Sign-up now. |