[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

R: Debian installer for SheevaPlug eSATA HELP



I have try to reinstall the system using the usb instead of  esata but the problem is always present.
Should be an u-boot problem?

I have attached the same hardisk with the installation made from my esata sheva plug to my Ionics shevaplug using usb. 
This last one is be able to boot without any problem.

What have i missed?

________________________________________
Da: Samuele Bianchi [pizzulicchio@mail2web.com]
Inviato: lunedì 12 luglio 2010 13.58
A: debian-arm@lists.debian.org
Oggetto: R: Debian installer for SheevaPlug eSATA

Good day Martin.
The ( only ) installer works fine, but i'm not be able to boot the system after the installation.

This is the output:
***********************************************************
Marvell Serial ATA Adapter
Integrated Sata device found
[0 1 0]: Enable DMA mode
  Device 1 @ 0 1:
Model: WDC WD1200BEVS-22RST0                    Firm: 04.01G04 Ser#:      WD-WXE808NWD688
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 114473.4 MB = 111.7 GB (234441648 x 512)
** Bad partition 1 **
** Bad partition 1 **
## Booting image at 00800000 ...
Bad Magic Number
Marvell>>
************************************************************
what have i done of wrong?
I'm using my Esata sheeva plug (new it ) with an Esata disc obviously.


________________________________________
Da: Martin Michlmayr [tbm@cyrius.com]
Inviato: venerdì 11 giugno 2010 16.04
A: debian-arm@lists.debian.org
Oggetto: Re: Debian installer for SheevaPlug eSATA

* Martin Michlmayr <tbm@cyrius.com> [2010-06-08 11:47]:
> Also, starting the installer is slightly different.  You have to do it
> like this:
>
>   setenv bootargs console=ttyS0,115200 base-installer/initramfs-tools/driver-policy=most apt-setup/local0/repository="http://people.debian.org/~tbm/orion lenny main" apt-setup/local0/key=http://people.debian.org/~tbm/orion/68FD549F
>  bootm 0x00800000 0x01100000

The new kernel is in Debian testing now, so you can simply install
with:
    setenv bootargs console=ttyS0,115200 base-installer/initramfs-tools/driver-policy=most
    bootm 0x00800000 0x01100000

Can someone with a SheevaPlug eSATA confirm that this is working?  If
so, I'll update my web site.
--
Martin Michlmayr
http://www.cyrius.com/


--
To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/20100611140434.GA15399@jirafa.cyrius.com

--
To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 27C865337A1CC74B81250B3FCC32A7B94D73EF0F3F@MBX81.ad2.softcom.biz">http://lists.debian.org/27C865337A1CC74B81250B3FCC32A7B94D73EF0F3F@MBX81.ad2.softcom.biz

Reply to: