Re: Thecus N2100 recovery
Could you try and boot across the network and then try telnet.
I think the N2100 will have an network boot option.
On Wed, Mar 17, 2010 at 6:17 AM, <email@example.com> wrote:
> My Thecus N2100 ran well for years. Then, the hard disk failed.
> (I know the HD failed because I plugged it in to a desktop and it
> made the same banging noise that it did when it was plugged into
> the N2100.) To prepare to install a new hard disk, I tried
> arping/telnet approach as per:
> but telnet times out:
> # arping -f 192.168.1.100 && telnet 192.168.1.100 9000
> ARPING 192.168.1.100 from 192.168.55.3 eth0
> Unicast reply from 192.168.1.100 [00:14:FD:30:2E:24] 12.252ms
> Sent 23 probes (23 broadcast(s))
> Received 1 response(s)
> Trying 192.168.1.100...
> telnet: connect to address 192.168.1.100: Connection timed out
> Any suggestions?
> To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact firstname.lastname@example.org
> Archive: 20100317004732.GA31768@redwoodscientific.com">http://lists.debian.org/20100317004732.GA31768@redwoodscientific.com
-- Sujit K M