Thecus N2100 recovery
My Thecus N2100 ran well for years. Then, the hard disk failed.
(I know the HD failed because I plugged it in to a desktop and it
made the same banging noise that it did when it was plugged into
the N2100.) To prepare to install a new hard disk, I tried
arping/telnet approach as per:
http://www.cyrius.com/debian/iop/n2100/telnet.html
but telnet times out:
# arping -f 192.168.1.100 && telnet 192.168.1.100 9000
ARPING 192.168.1.100 from 192.168.55.3 eth0
Unicast reply from 192.168.1.100 [00:14:FD:30:2E:24] 12.252ms
Sent 23 probes (23 broadcast(s))
Received 1 response(s)
Trying 192.168.1.100...
telnet: connect to address 192.168.1.100: Connection timed out
Any suggestions?
--John
Reply to: