Re: ARM installer images for etch (4.0) currently broken
Where do i get the Debian Live CD image from i am currently downloading from
live.debian.net but it is going very slow about 7KB/sec . Is the a mirror
> Thank you
> Is there a step by step guide to installing Debian. I am new to linux
> although i successfully flashed Slug to Unslung and Openslug. But i want
> to do the debian one right!
> I tried using the sercomm utility and reflashed to Debian but it does not
> boot up I get 3 beeps and the top light stays orange.
> Am i using the flash file which doesnt work? Where do i find the correct
> If i go with Debian live and Upslug(Is that better?) which Debian live
> Image do i use on P4 PC.
> Thanks Again
> Rod Whitby-2 wrote:
>> AndyC73 wrote:
>>> Can i currently install Debian using Upslug on windowsXP
>> Upslug2 is a linux tool for flashing images onto an NSLU2. It does not
>> have a windows port as far as I know.
>> There is a SerComm upgrade tool which does much the same thing and works
>> on Windows.
>> Stay well away from the Linksys EraseAll tool - if you use it with a
>> Debian image it will permanently brick your slug (unless you have JTAG
>> to recover it). This is because the Debian NSLU2 images do not contain
>> RedBoot. All other flashing techniques (including Upslug2 and the
>> SerComm tool) are careful not to touch your bootloader.
>> I would suggest you get a Debian LiveCD, and use it on that windowsXP
>> computer to run Debian so you can use Upslug2 to flash the NSLU2.
>> -- Rod Whitby
>> -- NSLU2-Linux Project Lead
>> To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact
View this message in context: http://www.nabble.com/ARM-installer-images-for-etch-%284.0%29-currently-broken-tf4306950.html#a12636317
Sent from the debian-arm mailing list archive at Nabble.com.