[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ARM installer images for etch (4.0) currently broken

Thank you

Is there a step by step guide to installing Debian.  I am new to linux
although i successfully flashed Slug to Unslung and Openslug. But i want to
do the debian one right!

I tried using the sercomm utility and reflashed to Debian but it does not
boot up I get 3 beeps and the top light stays orange.
Am i using the flash file which doesnt work? Where do i find the correct

If i go with Debian live and Upslug(Is that better?) which Debian live Image
do i use on P4 PC.

Thanks Again

Rod Whitby-2 wrote:
> AndyC73 wrote:
>> Can i currently install Debian using Upslug on windowsXP
> Upslug2 is a linux tool for flashing images onto an NSLU2.  It does not
> have a windows port as far as I know.
> There is a SerComm upgrade tool which does much the same thing and works
> on Windows.
> Stay well away from the Linksys EraseAll tool - if you use it with a
> Debian image it will permanently brick your slug (unless you have JTAG
> to recover it).  This is because the Debian NSLU2 images do not contain
> RedBoot.  All other flashing techniques (including Upslug2 and the
> SerComm tool) are careful not to touch your bootloader.
> I would suggest you get a Debian LiveCD, and use it on that windowsXP
> computer to run Debian so you can use Upslug2 to flash the NSLU2.
> -- Rod Whitby
> -- NSLU2-Linux Project Lead
> -- 
> To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org

View this message in context: http://www.nabble.com/ARM-installer-images-for-etch-%284.0%29-currently-broken-tf4306950.html#a12612949
Sent from the debian-arm mailing list archive at Nabble.com.

Reply to: