[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Swap not enabled?



On Sun, 2007-06-24 at 15:46 -0400, Aaron Klein wrote:
> # /etc/fstab: static file system information.
> #
> # <file system> <mount point>   <type>  <options>       <dump>  <pass>
> proc            /proc           proc    defaults        0       0
> UUID=63503a74-6e77-4623-bcea-9574740d3298       /               ext3    defaults
> ,errors=remount-ro 0       1
> /dev/sda5       none            swap    sw              0       0
> /dev/sda1       /media/usb0     auto    rw,user,noauto  0       0
> /dev/sda5       /media/usb1     auto    rw,user,noauto  0       0
> UUID=a50446ca-dcb2-4988-a19f-3dc9967e1449      /disk2           ext3    defaults
> ,errors=remount-ro 0       2
> 
> I get nothing when i do a swapon -s

Then you don't have swap!

> I know why I belive.  I have two disks attached to my NSLU2.  The main
> disk in port 1 usually gets /dev/sda so the root partion would be
> /dev/sda5  When I boot with just 1 disk attached i get the swap
> partion like I should.  When the second disk is attached it seems like
> I dont get the swap partion.  I think the main disk gets mounted
> sometimes as /dev/sdb.  I have the two main disk partions being
> mounted by UUID but I dont seem to have a UUID that I can find for the
> swap.

I think your right. So what's the UUID of a swap partition? Good
question. However, I think there was another thread (something to do
with RAID) which also had this kind of problem. You could search the
list for something like 'UUID'.

Maybe someone knows the correct solution by heart?

David


> 
> On 6/24/07, David Fokkema <dfokkema@ileos.nl> wrote:
> > On Sun, 2007-06-24 at 10:15 -0400, Aaron Klein wrote:
> > > How can I tell if my system will use the swap space?  Im running out
> > > of ram and my system really starts to crawl and I never see anything
> > > used as far as swap using the top command.
> > >
> >
> > Just do `swapon -s`. That will tell you if you use a swap partition and
> > how much of it is used.
> >
> > David
> >
> >
> > > --
> > > Have pets?  Get the help you need from the Pet Advice Network.
> > > We have 6 websites ready to help you.  http://www.petadvice.net
> > >
> > >
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> >
> >
> 
> 
> -- 
> Have pets?  Get the help you need from the Pet Advice Network.
> We have 6 websites ready to help you.  http://www.petadvice.net
> 
> 



Reply to: