[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: 3w_9xxx drive/lenny kernel



nicholas materer schrieb:
I just updated a system from etch to lenny.  With either the
linux-image-2.6.24-1-amd64 or the linux-image-2.6.22-3-amd64 kernel, my
3w_9xxxx raid controller did not function.  On the console, lines and lines
of PCI parity error are reported.  The 2.6.18-6-amd64 from etch works fine,
even after the system is updated.  Unfortunately, the system boots off the
raid (not the best idea) so I need to make more effect to capture the exact
errors.  Did not learn much from Googling.  Has anyone had similar
experiences with the 3w_9xxx card?
Did you upgraded the 3ware kernel module?

Its only an idea, all my boxes with 3ware running 2.6.18, too.

regards,
Markus
Sort lspci output:
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev
a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio
Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev
a3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev
a3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link)
02:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600]
(rev a2)
08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev
12)
08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev
12)
08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
0a:04.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID
80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev
a3)
80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev
a3)
80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)

Nick Materer





Reply to: