[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Fw: Re: Problems installing amd64 with Supermicro motherboard



Hi:
Grat! Please see below


--- On Tue, 4/15/08, Lennart Sorensen <lsorense@csclub.uwaterloo.ca> wrote:

> From: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
> Subject: Re: Fw: Re: Problems installing amd64 with Supermicro motherboard
> To: "Francesco Pietra" <chiendarret@yahoo.com>
> Cc: "debian64" <debian-amd64@lists.debian.org>
> Date: Tuesday, April 15, 2008, 7:51 AM
> On Tue, Apr 15, 2008 at 12:46:12AM -0700, Francesco Pietra
> wrote:
> > 
> > Quickly added:
> > I loaded Knoppix 5.3.1 (lenny, kernel 2.6.24.4)
> networking OK.
> 
> So the network works with the newer kernel, so it should
> work with a
> direct lenny install.
> 
> > When loading etch from the HDDD, command
> > 
> > startx
> > 
> > does not start X (it worked on previous machine).
> Errors
> > no scree found
> > X10 fatal IO error 104 on X server.
> > 
> > I use the GNU driver, no nvidia driver for X.
> 
> Ehm, doesn't that supermicro board have an ATI video
> chip?
> 
> Try reconfiguring X with dpkg-reconfigure xserver-xorg and
> let it pick
> what it thinks is right.


Reconfiguring (accepting automatic detection) worked fine indeed. Thanks. (ATI card)

Not only. Now dhclient connects to network!

At this point I can resume molecular dynamics with the machine. However, inf still wise to change to lenny, where to learn how to carry out correctly a debootstrap? Is it safe to save on another computer /usr/local where amber9 dock6 dms openmpi-1.2.3 nwchem are installed 

and /opt/intel
where the intel compilers for the above programs are installed?

Thanks for your precious instructions. Actually, I have acknowledged with thanks your great help in compiling mpqc with libint in a publication

F. Pietra "Why colchicine does not show mutarotation. With M05-2X density functional in the realm of tricky natural products" J. Phys. Org. Chem. 2007, 20, 1102-1107

francesco pietra


> 
> If you have an nvidia card added in, then I am pretty sure
> Etch can't
> run any 8xxx cards, only 7xxx and lower.  You need lenny
> for 8xxx series
> cards.
> 
> -- 
> Len Sorensen


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ


Reply to: