Le Wednesday 26 September 2007 16:48:14 Scott Lair, vous avez écrit : > Dave Ewart wrote: [...] > > Normally, one makes a RAID-10 software setup as follows: > > > > mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sd[ab]1 > > mdadm --create /dev/md1 --level=1 --raid-devices=2 /dev/sd[cd]1 > > mdadm --create /dev/md2 --level=0 --raid-devices=2 /dev/md[01] [...] > I've got some time to mess with it for a while and I'll post > back the results. > > thanks, > > scott Instead of having md over md device, I suggest to do stripped LVM over RAID 1. And it is supported during installation !
Attachment:
signature.asc
Description: This is a digitally signed message part.