Re: printing problem (etch/cups/hp)...

[edwardsa <edwardsa@afrl.kirtland.af.mil>]

fred wrote:
> Alexander Sieck <alexander.sieck@web.de> a écrit :
>
>   
> > I had a similar problem and got the same message after I just had
> > installed cups on amd64 debian etch.
> > After a reboot (it is a workstation) printing, e.g. test page from
> > cups webadmin, works.
> >     
>
> Hmm, I have reinstalled all cups/hplip/foomatic stuff, nothing has
> changed :-(
>
> I wonder if it is not a kernel problem (2.6.16) for the x86_64 arch with the usb port,
> because I can't get reading my usb stick too (works fine on my i686 distro):
>
> Nov 18 12:48:23 marsu kernel: ehci_hcd 0000:00:0b.2: GetStatus port 6 status 001005 POWER sig=se0 PE
>  CONNECT
> Nov 18 12:48:23 marsu kernel: usb 1-6: device descriptor read/64, error -110
> Nov 18 12:48:28 marsu kernel: usb 1-6: khubd timed out on ep0in len=0/64
> Nov 18 12:48:33 marsu kernel: usb 1-6: khubd timed out on ep0in len=0/64
> Nov 18 12:48:33 marsu kernel: ehci_hcd 0000:00:0b.2: port 6 high speed
> Nov 18 12:48:33 marsu kernel: ehci_hcd 0000:00:0b.2: GetStatus port 6 status 001005 POWER sig=se0 PE
>  CONNECT
> Nov 18 12:48:33 marsu kernel: usb 1-6: device descriptor read/64, error -110
> Nov 18 12:48:34 marsu kernel: ehci_hcd 0000:00:0b.2: port 6 high speed
> Nov 18 12:48:34 marsu kernel: ehci_hcd 0000:00:0b.2: GetStatus port 6 status 001005 POWER sig=se0 PE
>  CONNECT
>
> Any suggestion ?
>
> Cheers,
>
>   
If by x86_64 you mean the standard amd64 debian distro, I'm using cups 
with a USB printer with no difficulties.  I'm running the 2.6.17 kernel.

Art Edwards

--
Arthur H. Edwards
Senior Research Physicist
Air Force Research Laboratory
AFRL/VSSE
Bldg. 914
3550 Aberdeen Ave. SE
KAFB, NM 87117-5776

(505) 853-6042 (O)
(505) 463-6722 (C)
(505) 846-2290 (F)