Re: FGLRX and ATI XPRESS 200M
On Sat, 2006-11-04 at 18:34 +0100, Antonio Salvucci wrote:
> Hi, i have a problem with my ati xpress 200M card. I installed fglrx
> proprietary drivers, but 3D acceleration is no enabled. The fglrx module
> works, but the opengl acceleration is powerd by glx mesa project.
> This is my xorg.conf config file:
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen 0 "aticonfig-Screen[0]" 0 0
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Synaptics Touchpad"
> EndSection
>
> Section "Files"
> # local font server
> # if the local font server has problems, we can fall back on
> these
> FontPath "unix/:7100"
> FontPath "/usr/share/fonts/X11/misc"
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath "/usr/share/fonts/X11/cyrillic"
> FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/Type1"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/share/fonts/X11/CID"
> FontPath "/usr/lib/X11/fonts/CID"
> FontPath "/usr/share/fonts/X11/100dpi"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/share/fonts/X11/75dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "record"
> Load "type1"
> Load "v4l"
> Load "vbe"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xorg"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "it"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> Identifier "Synaptics Touchpad"
> Driver "synaptics"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/psaux"
> Option "Protocol" "auto-dev"
> Option "HorizScrollDelta" "0"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor Generico"
> HorizSync 28.0 - 60.0
> VertRefresh 43.0 - 60.0
> Option "LVDS"
> EndSection
>
> Section "Monitor"
> Identifier "aticonfig-Monitor[0]"
> Option "VendorName" "ATI Proprietary Driver"
> Option "ModelName" "Generic Autodetecting Monitor"
> Option "LVDS" "true"
> EndSection
>
> Section "Device"
>
> # Option "LVDSProbePLL" "on"
> Identifier "ATI Technologies, Inc. Radeon Xpress 200M (RS480)"
> Driver "radeon"
> Option "BusType" "PCI-E"
> Option "RenderAccel" "enable"
> # Option "AccelMethod" "XAA"
> Option "VideoOverlay" "on"
> Option "OpenGLOverlay" "off"
> Option "UseInternalAGPGART" "yes"
> Option "AGPMode" "4"
> Option "AGPFastWrite" "true"
> # Option "ForceMonitors" "notv"
> Option "UseFastTLS" "0"
> Option "EnablePageFlip" "true"
> Option "KernelModuleParm" "agplock=0"
> # Option "mtrr" "on"
> Option "no_accel" "off"
> Option "no_dri" "off"
> Option "NoDCC" "on"
> Option "PowerState" "1"
> Option "DynamicClocks" "on"
> Option "BlockSignalsOnLock" "on"
> BusID "PCI:1:5:0"
> EndSection
>
> Section "Device"
> Identifier "aticonfig-Device[0]"
> Driver "fglrx"
> Option "VideoOverlay" "on"
> Option "OpenGLOverlay" "off"
> Option "ForceMonitors" "notv"
> Option "no_accel" "off"
> Option "no_dri" "off"
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "ATI Technologies, Inc. Radeon Xpress 200M (RS480)"
> Monitor "Monitor Generico"
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "1200x800" "1152x864" "1152x768" "1024x768"
> "800x600"
> "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1200x800" "1152x864" "1152x768" "1024x768"
> "800x600"
> "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1200x800" "1152x864" "1152x768" "1024x768"
> "800x600"
> "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1280x800" "1152x864" "1152x768" "1024x768"
> "800x600"
> "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1200x800" "1152x864" "1152x768" "1024x768"
> "800x600"
> "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1200x800" "1152x864" "1152x768" "1024x768"
> "800x600"
> "640x480"
> EndSubSection
> EndSection
>
> Section "Screen"
> Identifier "aticonfig-Screen[0]"
> Device "aticonfig-Device[0]"
> Monitor "aticonfig-Monitor[0]"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
> Section "Extensions"
> Option "Composite" "1"
> EndSection
>
> If i remove Extensions section i have a black screen on X-server
> start-up. Do you have some ideas???Avete qualche idea???
> good weekend
> bye Antonio
The above config uses the "radeon" driver. If you want to use FGLRX,
then it needs to say "fglrx". And you'll probably have to remove all the
other crap like "BusType" or "BusID" which is completely and utterly
worthless.
Reply to: