Re: Tyan S2877 Plextor PX-755SA
On Sat, 09 Sep 2006 23:05:43 -0500
Karl Schmidt <karl@xtronics.com> wrote:
> I went from AMD64-K8-SMP sarge to etch and now it no longer sees this
> SATA plextor DVD drive.
>
> #cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: HDT722525DLA380 Rev: V44O
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi4 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: HDT722525DLA380 Rev: V44O
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 00 Lun: 00
> Vendor: Generic Model: USB SD Reader Rev: 1.00
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 00 Lun: 01
> Vendor: Generic Model: USB CF Reader Rev: 1.01
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 00 Lun: 02
> Vendor: Generic Model: USB SM Reader Rev: 1.02
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 00 Lun: 03
> Vendor: Generic Model: USB MS Reader Rev: 1.03
> Type: Direct-Access ANSI SCSI revision: 02
>
> -- this shows the two hard drives and the USB card reader - but the
> drive is not listed?
>
I am going through something similar. My SCSI cd-r shows errors then
disconnects. I have an older (PIII 1gz smp) box but I think the issue
is with IRQ/acpi/apic allocation. My next test is 'noapic, pci=bios'
the IRQ routing numbers otherwise don't make sense, to me anyway. My
bios allows me to asign an IRQ per slot.
--
Greg Madden
Reply to: