Re: OT: Re: multiprocessor
On Tue, Jun 20, 2006 at 11:03:28AM +0200, Christoph Anton Mitterer wrote:
> Francesco Pietra wrote:
> > Mother bowrd Tyan K8WE S 2895, two 265 dual opteron, all eight slots of ram
> > filled (1 GB each)
> >
> > At computer on:
> > CPU0=Dual Core amd64 opteron 265
> > CPU1=Dual Core amd64 opteron 265
> >
> Hi,.. this is off topic:
> I have the same board with two 275 Opterons and these days where its
> hot here in Munich (for what we are used to here) I have enormous heat
> Problems.
>
> I'm using BIOS Version 1.03 of the board and it shows me about the
> following temeratures:
> CPU0 45° C
> CPU1 73° C (I think this must be a BIOS error)
> Ambient 50 °C
>
> And this when the systems does nothing (expect from running X and the
> usual stuff).
>
> Also the chipsets get very hot...
>
> Could you please tell me your experiences with that board?
Try the lm_sensors.conf from Tyan:
ftp://ftp.tyan.com/software/lms/lms_s2895.conf
I experienced similar problems with an S2885, and most of it went away
by using Tyan's lm_sensors config file. The config file still needed a
little tweaking (high temp for the two CPUs were completely different)
but at least it gives you a working config file to start with.
Erik
--
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
Reply to: