[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Success on Gigabyte GA-K8NS-Ultra-939



Ditto here! The networking was kind of weird between eth0 and eth1 (one's nvidia and the other is sk98lin). The first time I installed it, it recognized the sk98lin one right away and performed the install over HTTP, but the second time (after I installed a DLink wireless card) it would no longer recognize either of the network ports on the motherboard, so maybe my DLink had something to do with that...

Anyway, post initial install, everything worked fine.

Good job indeed.



On 5-May-06, at 3:44 PM, Andrei Mikhailovsky wrote:

Hi

Successfully working on amd64 Debian 3.1r2, as well as on amd64
unstable(sid) branch. Tried with kernels 2.6.12 - 2.6.16.

Great Job lads!


Motherboard: Gigabyte GA-K8NS-Ultra-939
ATA:         nForce3
Serial ATA:  sata_nv
Network:     sk98lin and forcedeth
Sound:       nForce3

lspci:
0000:00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge
(rev a1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge
(rev a2)
0000:00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System
Management (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev
a1)
0000:00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev
a1)
0000:00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0
Controller (rev a2)
0000:00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev
a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3
250Gb AC'97 Audio Controller (rev a1)
0000:00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA
Controller (v2.5) (rev a2)
0000:00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA
Controller (v2.5) (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to
PCI Bridge (rev a2)
0000:00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI
Bridge (rev a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP
[Radeon 9600]
0000:01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon
9600] (Secondary)
0000:02:0b.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller (rev 13)
0000:02:0d.0 RAID bus controller: Silicon Image, Inc. SiI 3512
[SATALink/SATARaid] Serial ATA Controller (rev 01)
0000:02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b
Link Layer Controller (rev 01)




Reply to: