Re: apt get for AMD64
Sean Roe wrote:
>
> Well I am sitting across the room from the machine, so no proxies just a
> switch is between my workstation and this new server. This is all new
> hardware so, I am not inclined to to think its hardware, but then
> again. Are there any switches in the tg3 driver?
modinfo tg3 will tell you any switches there are, and there aren't
really any (well, a debug enable switch, but thats it).
I maintain a server with the same board on that pushes over 100Mbps for
a good portion of the day, and have _no_ problems whatsoever with it.
You have defective hardware somewhere.
Have you run memtest86?
Have you tried a cross-over cable instead of the switch?
Have you tried the other two ethernet ports on the board?
I strongly suspect memtest86/memtest86+ will find problems.
PS: If memtest86 finds defective RAM, I suggest re-installing from
scratch once you've repaired the hardware.
Reply to: