Re: mplayer
I got mplayer from
deb http://spello.sscnet.ucla.edu/marillat/ sid main
Clyde
On Mon, Oct 03, 2005 at 10:09:43PM +1000, Dean Hamstead wrote:
> try a different file type i guess
> ive played everything fine on fbdev (divx etc)
>
> x11 is when x (your cpu) does all the work
> xv passes a lot of it to the graphics card
>
> scaling in x11 will murder performance
> scaling in xv will have no effect on performance as according to my
> understanding, the video card does that.
>
> did you compile mplayer or get debs?
>
> Dean
>
> hjalmar wrote:
> >No I am not running X as root. I can not get mplayer to work as a normal
> >user but I have no problems with it when run as root.
> >However when I run mplayer as root mplayer -vo fbdev I get the following
> >MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
> >CPU: Advanced Micro Devices (Family: 8, Stepping: 0)
> >Detected cache-line size is 64 bytes
> >CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
> >Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2
> >
> >
> >
> >Failed to open /dev/rtc: Device or resource busy (it should be readable by
> >the user.)
> >Opening joystick device /dev/input/js0
> >Can't open joystick device /dev/input/js0 : No such device
> >Can't init input joystick
> >Setting up LIRC support...
> >mplayer: could not connect to socket
> >mplayer: No such file or directory
> >Failed to open LIRC support.
> >You will not be able to use your remote control.
> >Playing
> >E=mc2-Einstein_and_the_Worlds_Most_Famous_Equation-digitaldistractions.avi.
> >AVI file format detected.
> >VIDEO: [XVID] 480x272 12bpp 25.000 fps 805.4 kbps (98.3 kbyte/s)
> >Clip info:
> > Software: VirtualDubMod 1.5.10.1 (build 2439/release)
> > ==========================================================================
> > Trying to force audio codec driver family libmad...
> > Opening audio decoder: [libmad] libmad mpeg audio decoder
> > AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
> > Selected audio codec: [mad] afm:libmad (libMAD MPEG layer 1-2-3)
> > ==========================================================================
> > ==========================================================================
> > Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
> > Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
> > ==========================================================================
> > Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
> > alsa-init: 1 soundcard found, using: default
> > alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little
> >Endian
> >AO: [alsa] 48000Hz 2ch s16le (2 bps)
> >Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
> >Starting playback...
> >VDec: vo config request - 480 x 272 (preferred csp: Planar YV12)
> >Could not find matching colorspace - retrying with -vf scale...
> >Opening video filter: [scale]
> >The selected video_out device is incompatible with this codec.
> >
> >FATAL: Could not initialize video filters (-vf) or video output (-vo).
> >
> >Can't restore text mode: Invalid argument
> >alsa-uninit: pcm closed
> >
> >Exiting... (End of file)
> >
> >but mplayer -vo xv and mplayer -vo x11 works as root but not as a normal
> >user.
> >Any ideas?
> >Clyde
> >
> >On Mon, Oct 03, 2005 at 08:01:20PM +1000, Dean Hamstead wrote:
> >
> >>are you running x as root?
> >>
> >>do other applications all work? could be some device permissions.
> >>does the framebuffer driver work?
> >>
> >>Dean
> >>
> >>hjalmar wrote:
> >>
> >>>I have tried differnet -vo options but get the same result when I run it
> >>>as a
> >>>normal user. When run as root there is no problem with the -vo option
> >>>and the movie starts to play.
> >>>When run as a normal user without the -vo option just mplayer "movie
> >>>name"
> >>>I get the following
> >>>
> >>>MPlayer 1.0pre7try2-3.4.5 (C) 2000-2005 MPlayer Team
> >>>CPU: Advanced Micro Devices (Family: 8, Stepping: 0)
> >>>Detected cache-line size is 64 bytes
> >>>CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
> >>>Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2
> >>>
> >>>
> >>>Failed to open /dev/rtc: Device or resource busy (it should be readable
> >>>by
> >>>the user.)
> >>>Playing Building_the_Great_Pyramid.avi.
> >>>AVI file format detected.
> >>>VIDEO: [XVID] 320x240 24bpp 29.970 fps 565.2 kbps (69.0 kbyte/s)
> >>>==========================================================================
> >>>Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> >>>AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
> >>>Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
> >>>==========================================================================
> >>>==========================================================================
> >>>Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
> >>>Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
> >>>==========================================================================
> >>>Checking audio filter chain for 44100Hz/2ch/s16le -> 44100Hz/2ch/s16le...
> >>>AF_pre: 44100Hz/2ch/s16le
> >>>AO: [oss] 44100Hz 2ch s16le (2 bps)
> >>>Building audio filter chain for 44100Hz/2ch/s16le -> 44100Hz/2ch/s16le...
> >>>Starting playback...
> >>>[mpeg4 @ 0x9c19f0]looks like this file was encoded with
> >>>(divx4/(old)xvid/opendivx) -> forcing low_delay flag
> >>>VDec: vo config request - 320 x 240 (preferred csp: Planar YV12)
> >>>Could not find matching colorspace - retrying with -vf scale...
> >>>Opening video filter: [scale]
> >>>The selected video_out device is incompatible with this codec.
> >>>
> >>>FATAL: Could not initialize video filters (-vf) or video output (-vo).
> >>>
> >>>Can't restore text mode: Invalid argument
> >>>
> >>>Exiting... (End of file)
> >>>
> >>>Why would root not have a problem with the -vo option but a normal user
> >>>would?
> >>>Clyde
> >>>
> >>>On Sun, Oct 02, 2005 at 09:49:10PM +1000, Dean Hamstead wrote:
> >>>
> >>>
> >>>>the rtc device wouldnt be the problem, its just the real time clock
> >>>>which mplayer can use to make sure the movies are played at the
> >>>>correct speed, on my ibook this device doesnt exist and things
> >>>>run fine - mplayer uses an internal algorithm instead.
> >>>>
> >>>>your error output isnt very helpful, try a different '-vo' option
> >>>>that seems the be the problem.
> >>>>
> >>>>
> >>>>Dean
> >>>>
> >>>>hjalmar wrote:
> >>>>
> >>>>
> >>>>>Hello,
> >>>>>I am having a little bit of trouble with mplayer and wondering if you
> >>>>>guys
> >>>>>could give me some help. I apt-get install from
> >>>>>deb http://spello.sscnet.ucla.edu/marillat/ sid main
> >>>>>Everything went fine but I can only play movies if I am root. Here are
> >>>>>the
> >>>>>two printouts I get when I start mplayer
> >>>>>For root
> >>>>>mplayer -vo xv "movie name"
> >>>>>
> >>>>>MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
> >>>>>CPU: Advanced Micro Devices (Family: 8, Stepping: 0)
> >>>>>Detected cache-line size is 64 bytes
> >>>>>CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
> >>>>>Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2
> >>>>>
> >>>>>
> >>>>>
> >>>>>Failed to open /dev/rtc: Device or resource busy (it should be
> >>>>>readable by
> >>>>>the user.)
> >>>>>Opening joystick device /dev/input/js0
> >>>>>Can't open joystick device /dev/input/js0 : No such device
> >>>>>Can't init input joystick
> >>>>>Setting up LIRC support...
> >>>>>mplayer: could not connect to socket
> >>>>>mplayer: No such file or directory
> >>>>>Failed to open LIRC support.
> >>>>>You will not be able to use your remote control.
> >>>>>Playing Building_the_Great_Pyramid.avi.
> >>>>>AVI file format detected.
> >>>>>VIDEO: [XVID] 320x240 24bpp 29.970 fps 565.2 kbps (69.0 kbyte/s)
> >>>>>==========================================================================
> >>>>>Trying to force audio codec driver family libmad...
> >>>>>Opening audio decoder: [libmad] libmad mpeg audio decoder
> >>>>>AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
> >>>>>Selected audio codec: [mad] afm:libmad (libMAD MPEG layer 1-2-3)
> >>>>>==========================================================================
> >>>>>vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local
> >>>>>display)
> >>>>>==========================================================================
> >>>>>Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
> >>>>>Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
> >>>>>==========================================================================
> >>>>>Building audio filter chain for 44100Hz/2ch/s16le -> 0Hz/0ch/??...
> >>>>>alsa-init: 1 soundcard found, using: default
> >>>>>alsa: 44100 Hz/2 channels/4 bpf/60208 bytes buffer/Signed 16 bit
> >>>>>Little Endian
> >>>>>AO: [alsa] 44100Hz 2ch s16le (2 bps)
> >>>>>Building audio filter chain for 44100Hz/2ch/s16le ->
> >>>>>44100Hz/2ch/s16le...
> >>>>>Starting playback...
> >>>>>[mpeg4 @ 0x2aaaab082cb0]looks like this file was encoded with
> >>>>>(divx4/(old)xvid/opendivx) -> forcing low_delay flag
> >>>>>VDec: vo config request - 320 x 240 (preferred csp: Planar YV12)
> >>>>>VDec: using Planar YV12 as output csp (no 0)
> >>>>>Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
> >>>>>VO: [xv] 320x240 => 320x240 Planar YV12
> >>>>>alsa-uninit: pcm closed-0.011 ct: -0.002 424/424 1% 0% 0.7% 0 0 48%
> >>>>>
> >>>>>Exiting... (Quit)
> >>>>>
> >>>>>Here is what I get when I start it as a normal user
> >>>>>
> >>>>>MPlayer 1.0pre7try2-3.4.5 (C) 2000-2005 MPlayer Team
> >>>>>CPU: Advanced Micro Devices (Family: 8, Stepping: 0)
> >>>>>Detected cache-line size is 64 bytes
> >>>>>CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
> >>>>>Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2
> >>>>>
> >>>>>
> >>>>>Failed to open /dev/rtc: Device or resource busy (it should be
> >>>>>readable by
> >>>>>the user.)
> >>>>>Playing Building_the_Great_Pyramid.avi.
> >>>>>AVI file format detected.
> >>>>>VIDEO: [XVID] 320x240 24bpp 29.970 fps 565.2 kbps (69.0 kbyte/s)
> >>>>>==========================================================================
> >>>>>Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> >>>>>AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
> >>>>>Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
> >>>>>==========================================================================
> >>>>>Error opening/initializing the selected video_out (-vo) device.
> >>>>>
> >>>>>
> >>>>>Exiting... (End of file)
> >>>>>
> >>>>>I have checked the /dev/rtc and the permission is crw-rw-r-- 1 root
> >>>>>root
> >>>>>10, 135 2005-03-01 00:08 /dev/rtc
> >>>>>and I am a member of the video group as well.
> >>>>>Thanks for any help,
> >>>>>Clyde
> >>>>>
> >>>>>
> >>>>
> >>>>--
> >>>>WWW: http://dean.bong.com.au LAN: http://www.bong.com.au
> >>>>EMAIL: dean@bong.com.au or djzort@bong.com.au
> >>>>ICQ: 16867613
> >>>
> >>>
> >>>
> >>--
> >>WWW: http://dean.bong.com.au LAN: http://www.bong.com.au
> >>EMAIL: dean@bong.com.au or djzort@bong.com.au
> >>ICQ: 16867613
> >
> >
> >
>
> --
> WWW: http://dean.bong.com.au LAN: http://www.bong.com.au
> EMAIL: dean@bong.com.au or djzort@bong.com.au
> ICQ: 16867613
Reply to: