FW: bug #311856
Hi,
I submitted this install bug report, but haven't heard anything back and
figured that the amd64 crowd might be able to provide some insight. Has
anyone had any luck installing on an MIS K8N Neo4 mobo?
When I try installing it freezes when installing the kernel
(kernel-image-2.6.8-11-amd64-generic (2.6.8-13)). Looking at the output
on the F3 term it freezes shortly after saying "You are attempting to
install a kernel version that is the same...Please Hit
return to continue" with the added warning:
dpkg: warning, architecture `amd64' not in remapping table
This is using the daily installer dated 02-June-2005, but I also
experienced this problem with images a week or so before (forget which
ones exactly). I've tried different kernel params (apci=off, noapic,
nolapic, ide=nodma), both sata and ide drives, without any success.
Regular 32bit debian installs ok although the above mentioned kernel
params seem necessary.
Any advice would be appreciated. Below are the lspci outputs from
inside the amd64 installer. Thanks.
Carrick
Package: installation-reports
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/amd64/current/debian-testing-amd64-netinst.iso
Date of image: 02-Jun-2005
uname -a:
Linux 2.6.8-11-amd64-generic #1 Wed May 4 20:03:43 UTC 2005 x86_64 unknown
Date: 03-June-2005
Method: NetInstall CD for AMD64
Machine: Custom machine
MSI K8N Neo4 Platinum mother board (nForce4)
Gigabyte nVidia GeForce 6600 TurboForce PCIe video card
Processor:
AMD Althlon 64 3200+
Memory:
2x512MB
Root Device:
IDE
Root Size/partition table:
Tried different things, failed with all. Formatted ext2.
/dev/ide/host0/bus0/target0/lun0 # fdisk -l disc
Disk disc: 80.0 GB, 80054059008 bytes
16 heads, 63 sectors/track, 155114 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
part1 1 19376 9765472+ 83 Linux
part2 19381 21707 1172745 82 Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
Output of lspci and lspci -n:
/cdrom/pool/main/p/pciutils # lspci
0000:00:00.0 Memory controller: nVidia Corporation: Unknown device 005e
(rev a3)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 0050 (rev a3)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 005a
(rev a2)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 005b
(rev a3)
0000:00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev f2)
0000:00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev f3)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 0055 (rev f3)
0000:00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
0000:00:0a.0 Bridge: nVidia Corporation: Unknown device 0057 (rev a3)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:05:00.0 VGA compatible controller: nVidia Corporation: Unknown
device 0141 (rev a2)
/cdrom/pool/main/p/pciutils # lspci -n
0000:00:00.0 0580: 10de:005e (rev a3)
0000:00:01.0 0601: 10de:0050 (rev a3)
0000:00:01.1 0c05: 10de:0052 (rev a2)
0000:00:02.0 0c03: 10de:005a (rev a2)
0000:00:02.1 0c03: 10de:005b (rev a3)
0000:00:06.0 0101: 10de:0053 (rev f2)
0000:00:07.0 0101: 10de:0054 (rev f3)
0000:00:08.0 0101: 10de:0055 (rev f3)
0000:00:09.0 0604: 10de:005c (rev a2)
0000:00:0a.0 0680: 10de:0057 (rev a3)
0000:00:0b.0 0604: 10de:005d (rev a3)
0000:00:0c.0 0604: 10de:005d (rev a3)
0000:00:0d.0 0604: 10de:005d (rev a3)
0000:00:0e.0 0604: 10de:005d (rev a3)
0000:05:00.0 0300: 10de:0141 (rev a2)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Install base System:
Freezes when installing kernel (kernel-image-2.6.8-11-amd64-generic
(2.6.8-13)). From F3 it freezes shortly after saying "You are
attempting to install a kernel version that is the same...Please Hit
return to continue" with the added warning:
dpkg: warning, architecture `amd64' not in remapping table
Completely frozen at this point, power cycling is the only thing that
works. Same results when booting off of the cd with "linux noapic
nolapic apci=off" and various other combinations.
Reply to: