Try this command and post it to the list. $ cat /proc/bus/usb/devices | grep ^T: Daniel van Eeden <daniel_e@dds.nl> Op ma, 20-12-2004 te 14:20 +0100, schreef Lorenzo Milesi: > Hi > > I'm having some problems with USB2. > According to ASUS specs, my pc (A2526KUH) has 5xUSB2 ports. > But lspci says the following: > 0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) > 0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) > 0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) > > Anyway when I insert my Packard Bell 1Gb mp3 player it's used by the > OHCI driver, instead of the (also loaded) ehci! I tried all the five > ports, all the same! > I tried also an external USB2 HDD but does the same. > > This is the output of messages > Dec 20 14:13:58 localhost kernel: ohci_hcd 0000:00:02.1: wakeup > Dec 20 14:13:58 localhost kernel: usb 2-2: new full speed USB device > using address 2 > Dec 20 14:14:01 localhost kernel: scsi1 : SCSI emulation for USB Mass > Storage devices > Dec 20 14:14:01 localhost kernel: Vendor: Packard Model: Portable > Player Rev: 0100 > Dec 20 14:14:01 localhost kernel: Type: Direct-Access > ANSI SCSI revision: 02 > Dec 20 14:14:01 localhost kernel: SCSI device sda: 2041344 512-byte > hdwr sectors (1045 MB) > Dec 20 14:14:01 localhost usb.agent[8228]: usb-storage: already loaded > Dec 20 14:14:01 localhost kernel: sda: Write Protect is off > Dec 20 14:14:02 localhost kernel: > /dev/scsi/host1/bus0/target0/lun0:<7>usb-storage: queuecommand called > Dec 20 14:14:02 localhost kernel: p1 > Dec 20 14:14:02 localhost kernel: Attached scsi removable disk sda at > scsi1, channel 0, id 0, lun 0 > Dec 20 14:14:02 localhost scsi.agent[8243]: disk at > /devices/pci0000:00/0000:00:02.1/usb2/2-2/2-2:1.0/host1/1:0:0:0 > > > After these message I tried copying 139Mb: it took 2m30 -> 1Mb/s (fullspeed) > > any ideas? > thanks > maxxer > > -- Daniel van Eeden <daniel_e@dds.nl>
Attachment:
smime.p7s
Description: S/MIME cryptographic signature