Re: USB-Flash <-> uba?
I've had some flakiness issues with the ub driver in 2.6.9. As an
alternative, one can simply disable it in the kernel config, and then usb
drives use the old behaviour (usb-storage, show up as scsi disk, etc). Just
something else to keep in mind, if you prefer the old method.
-Ted
On Thursday 18 November 2004 21:44, Sten Viktor Håkonsen wrote:
> Hi
>
> I had a similar problem on my 2.6.9 kernel.
> dmesg said:
>
> Nov 19 05:50:23 diskless kernel: usb 4-1: new full speed USB device
> using address 2
> Nov 19 05:50:23 diskless usb.agent[4432]: ub: already loaded
> Nov 19 05:50:24 diskless kernel: uba: device 2 capacity nsec 516096
> bsize 512
> Nov 19 05:50:24 diskless kernel: uba: was not changed
> Nov 19 05:50:24 diskless kernel: uba: uba1
>
>
> After poking around a bit, I saw a logfile from somedude I dont
> remember, I discovered that he had a module named "udev" that removed
> /dev/uba1 on disconnecting a pendrive. So I installed the package "udev"
> and VOILA, it worked fine to mount "/dev/uba1".
>
> Hope this helps some of u guys out there
>
> Best regards
>
> Sten Viktor
Reply to: