Re: sid-amd64-netinst.iso install report
On Fri, 2004-11-19 at 01:59, Lennart Sorensen wrote:
> On Thu, Nov 18, 2004 at 02:55:50PM +1100, Norval Watson wrote:
> > Package: installation-reports
> >
> > INSTALL REPORT
> >
> > Debian-installer-version:
> > http://debian-amd64.alioth.debian.org/install-images/sid-amd64-netinst.iso 26 Oct 2004
> > uname -a:
> > Date: Nov 17 2004
> > Method: Downloaded sid-amd64-netinst.iso, burnt to CD, booted from CD
> >
> > Machine: Home assembled
> > Processor: AMD Athlon 64 3000+
> > Memory: 2 x 512MB Geil PC3200 400MHz DDR Dual Channel, total 1024MB
> > Root Device: hde Seagate ST380013AS SATA 80GB 7200rpm 8MB cache
> > Root Size/partition table: Install got stuck at partitioniong:
> > "No partitionable media found."
> > Output of lspci and lspci -n:
> > scoop@my64:~$ lspci
> > 0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev
> > a1)
> > 0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev
> > a2)
> > 0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00e4 (rev a1)
> > 0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00e7
> > (rev a1)
> > 0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00e7
> > (rev a1)
> > 0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00e8
> > (rev a2)
> > 0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown
> > device 00ea (rev a1)
> > 0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00e5 (rev
> > a2)
> > 0000:00:0a.0 IDE interface: nVidia Corporation: Unknown device 00e3 (rev
> > a2)
> > 0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00e2 (rev
> > a2)
> > 0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 00ed (rev
> > a2)
> > 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> > 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> > 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> > 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> > 0000:01:00.0 VGA compatible controller: nVidia Corporation NV18
> > [GeForce4 MX 4000 AGP 8x] (rev a4)
> > 0000:02:0b.0 Ethernet controller: Marvell Technology Group Ltd. Yukon
> > Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
> > 0000:02:0c.0 RAID bus controller: Integrated Technology Express, Inc.
> > IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be
> > IT8212, embedded seems (rev 11)
> > 0000:02:0d.0 RAID bus controller: Silicon Image, Inc. (formerly CMD
> > Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev
> > 01)
> > 0000:02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
> > IEEE-1394a-2000 Controller (PHY/Link)
>
> Which SATA controller did you use for the HD?
This is some output from dmesg re hd:
ide_setup: hdc=ide-scsi
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ide: late registration of driver.
NFORCE3-250: IDE controller at PCI slot 00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: 00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
NFORCE3-250-SATA: IDE controller at PCI slot 00:0a.0
NFORCE3-250-SATA: chipset revision 162
NFORCE3-250-SATA: 00:0a.0 (rev a2) UDMA133 controller
NFORCE3-250-SATA: 100% native mode on irq 11
ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio
hdc: LITE-ON DVDRW SOHW-1213S, ATAPI CD/DVD-ROM drive
hde: ST380013AS, ATA DISK drive
blk: queue f8821408, I/O limit 4095Mb (mask 0xffffffff)
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x9f0-0x9f7,0xbf2 on irq 11
hde: attached ide-disk driver.
hde: Host Protected Area detected.
current capacity is 156299375 sectors (80025 MB)
native capacity is 156301488 sectors (80026 MB)
hde: 156299375 sectors (80025 MB) w/8192KiB Cache, CHS=9729/255/63,
UDMA(33)
Partition check:
/dev/ide/host2/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
>
> Does the BIOS have any SATA/PATA settings?
I will check when I reboot
>
> Len Sorensen
>
>
Thanks
Norv
Reply to: