RE: Strange QLA1040 firmaware load error with 2.6.30 from testing
I found a bug report about this in the bts. I will forward.
> -----Original Message-----
> From: Uwe Schindler [mailto:uwe@thetaphi.de]
> Sent: Saturday, August 22, 2009 7:06 PM
> To: debian-alpha@lists.debian.org
> Subject: Strange QLA1040 firmaware load error with 2.6.30 from testing
>
> After upgrading to linux-image-2.6.30-alpha-generic I get the following
> trace in the kernel log. The qlogic firmware package is installed, as
> initramfs complained about missing bin files.
>
> The driver loads and the system works as expected, all disks are reported:
>
> [ 4.416013] qla1280 0000:00:09.0: firmware: requesting qlogic/1040.bin
> [ 4.416013] ------------[ cut here ]------------
> [ 4.416013] WARNING: at
> /build/buildd-linux-2.6_2.6.30-5-alpha-u828kA/linux-2
> .6-2.6.30/debian/build/source_alpha_none/kernel/softirq.c:141
> _local_bh_enable_i
> p+0x4c/0xa4()
> [ 4.416013] Modules linked in: tulip(+) bitrev qla1280(+) scsi_mod
> usbcore(+)
> de2104x crc32
> [ 4.416013] fffffc000f0479f8 0000000000000005 fffffc000103bef0
> fffffc000e86d7
> c0
> [ 4.416013] 0000000000000000 fffffc000c652c00 fffffc000e86d7c0
> fffffff
> f00000010
> [ 4.416013] fffffc00011eb2d4 0000000000000001 fffffc00011ff958
> fffffc0
> 00c652c00
> [ 4.416013] fffffc000c652c18 fffffc000e86d7c0 fffffc000114baec
> fffffc0
> 00c76e030
> [ 4.416013] 0000000000000007 fffffc000e86d7c0 fffffc000c76e000
> fffffc0
> 00e8113c0
> [ 4.416013] fffffc00013c66e8 fffffc00012bfdab 0000000000000001
> 0000000
> 000000000
> [ 4.416013] Trace:
> [ 4.416013] [<fffffc000103bef0>] _local_bh_enable_ip+0x4c/0xa4
> [ 4.416013] [<fffffc00011eb2d4>] sk_filter+0xcc/0x104
> [ 4.416013] [<fffffc00011ff958>] netlink_broadcast+0x1e0/0x3bc
> [ 4.416013] [<fffffc000114baec>] kobject_uevent_env+0x384/0x4a0
> [ 4.416013] [<fffffc00011b4ad0>] _request_firmware+0x468/0x57c
> [ 4.416013] [<fffffc000116485c>] local_pci_probe+0x24/0x38
> [ 4.416013] [<fffffc0001164b4c>] pci_device_probe+0x64/0xa0
> [ 4.416013] [<fffffc00011af048>] driver_probe_device+0xcc/0x1e0
> [ 4.416013] [<fffffc00011af1e4>] __driver_attach+0x88/0xd4
> [ 4.416013] [<fffffc00011ae5dc>] bus_for_each_dev+0x68/0xd0
> [ 4.416013] [<fffffc00011af15c>] __driver_attach+0x0/0xd4
> [ 4.416013] [<fffffc00011aee00>] driver_attach+0x2c/0x40
> [ 4.416013] [<fffffc00011adb28>] bus_add_driver+0xd8/0x304
> [ 4.416013] [<fffffc00011af69c>] driver_register+0x108/0x1d4
> [ 4.416013] [<fffffc000116501c>] __pci_register_driver+0x5c/0x120
> [ 4.416013] [<fffffc00010100bc>] do_one_initcall+0x74/0x1cc
> [ 4.416013] [<fffffc000105fb68>] SyS_init_module+0xf0/0x2c0
> [ 4.416013] [<fffffc000105fb50>] SyS_init_module+0xd8/0x2c0
> [ 4.416013] [<fffffc0001010de4>] entSys+0xa4/0xc0
> [ 4.416013]
> [ 4.416013] ---[ end trace b7134e8cc61d5fa9 ]---
>
> Anybody has seen this, too?
>
> Just one question: Is the firmware always needed or can I uninstall the
> qlogic-firmware package again? Does the controller has an eprom or does it
> only works with driver-provided firmware? As the firmware does not seem to
> be loaded correctly, is it really needed?
>
> I do not want to try this out, as I have no physical access to the machine
> currently.
>
> Uwe
>
> -----
> Uwe Schindler
> H.-H.-Meier-Allee 63, D-28213 Bremen
> http://www.thetaphi.de
> eMail: uwe@thetaphi.de
>
>
>
> --
> To UNSUBSCRIBE, email to debian-alpha-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
Reply to: