Re: kernel-image packages for alpha in need of testing
On Wed, Jun 16, 2004 at 03:31:07PM -0500, Steve Langasek wrote:
> I've rebuilt and reposted.
I've repeated the test with this new image and the qlogic-driver doesn't
fail anymore. When it comes to initialize the network, it cannot retrieve
its settings via DHCP, also manual assignment doesn't help. It cannot get
connection to any other computer through the network. Your patch probably
affected the tulip and 3c59x module (which I use in my alpha).
Joerg
the output of "dmesg"
Linux version 2.4.26-1-generic (vorlon@quetzlcoatl) (gcc version 3.3.3 (Debian 20040320)) #1 Thu Jun 10 23:43:13 CDT 2004
Booting GENERIC on Miata using machine vector Miata from SRM
Major Options: LEGACY_START
Command line: root=/dev/ram ramdisk_size=16384 devfs=mount,dall console=ttyS0
memcluster 0, usage 1, start 0, end 243
memcluster 1, usage 0, start 243, end 131071
memcluster 2, usage 1, start 131071, end 131072
freeing pages 243:384
freeing pages 746:131071
reserving pages 746:748
Initial ramdisk at: 0xfffffc003fb0e000 (4077308 bytes)
pci: cia revision 1 (pyxis)
On node 0 totalpages: 131071
zone(0): 131071 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram ramdisk_size=16384 devfs=mount,dall console=ttyS0
HWRPB cycle frequency bogus. Estimated 433084262 Hz
[...]
POSIX conformance testing by UNIFIX
pci: passed tb register update test
pci: passed sg loopback i/o read test
pci: passed pte write cache snoop test
pci: failed valid tag invalid pte reload test (mcheck; workaround available)
pci: passed pci machine check test
pci: tbia workaround enabled
pci: enabling save/restore of SRM state
PCI: Bus 1, bridge: Digital Equipment Corporation DECchip 21052
IO window: 8000-8fff
MEM window: 09000000-090fffff
PREFETCH window: 09100000-091fffff
pci: pyxis 8K boundary dma bug - sg dma disabled
Linux NET4.0 for Linux 2.4
[...]
Mounted devfs on /dev
Freeing unused kernel memory: 176k freed
insmod(28): unaligned trap at 000000012001ec84: 0000000120161ddb 2c 21
insmod(28): unaligned trap at 000000012001ec84: 0000000120161df5 2c 21
insmod(28): unaligned trap at 000000012001ec84: 0000000120161e06 2c 21
insmod(28): unaligned trap at 000000012001ec84: 0000000120161e4d 2c 21
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
srm_env: version 0.0.5 loaded successfully
depmod(173): unaligned trap at 000000012001ec84: 0000000120184d7b 2c 21
depmod(173): unaligned trap at 000000012001ec84: 0000000120184d93 2c 21
depmod(173): unaligned trap at 000000012001ec84: 0000000120184db2 2c 21
depmod(173): unaligned trap at 000000012001ec84: 0000000120184df2 2c 21
depmod(1453): unaligned trap at 000000012001ec84: 0000000120184d7b 2c 21
depmod(1453): unaligned trap at 000000012001ec84: 0000000120184d93 2c 21
depmod(1453): unaligned trap at 000000012001ec84: 0000000120184db2 2c 21
depmod(1453): unaligned trap at 000000012001ec84: 0000000120184df2 2c 21
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
tulip0: Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block.
tulip0: Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block.
tulip0: Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0: MII transceiver #5 config 0000 status 7849 advertising 01e1.
eth0: Digital DS21143 Tulip rev 48 at 0x9000, 00:00:F8:75:79:E5, IRQ 24.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
01:09.0: 3Com PCI 3c595 Vortex 100baseTx at 0x8400. Vers LK1.1.18-ac
01:09.0: Overriding PCI latency timer (CFLT) setting of 32, new value is 248.
00:a0:24:50:5c:fc, IRQ 40
product code 4255 rev 00.0 date 01-06-96
Internal config register is 101001b, transceivers 0xe10a.
64K word-wide RAM 3:1 Rx:Tx split, autoselect/10baseT interface.
01:09.0: scatter/gather disabled. h/w checksums disabled
SCSI subsystem driver Revision: 1.00
qlogicisp : new isp1020 revision ID (5)
scsi0 : QLogic ISP1020 SCSI on PCI bus 01 device 40 irq 36 MEM base 0xfffffc8809000000
Vendor: SEAGATE Model: ST318203LSUN18G Rev: 034A
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST318203LSUN18G Rev: 034A
Type: Direct-Access ANSI SCSI revision: 02
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
CMD646: IDE controller at PCI slot 00:04.0
CMD646: chipset revision 1
CMD646: not 100% native mode: will probe irqs later
CMD646: chipset revision 0x01, MultiWord DMA Limited, IRQ workaround enabled
ide0: BM-DMA at 0x9080-0x9087, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x9088-0x908f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA CD-ROM XM-6302B, ATAPI CD/DVD-ROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 8, lun 0
SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6
SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB)
/dev/scsi/host0/bus0/target8/lun0: p1
insmod(3755): unaligned trap at 000000012001ec84: 0000000120161cab 2c 21
insmod(3755): unaligned trap at 000000012001ec84: 0000000120161cc3 2c 21
insmod(3755): unaligned trap at 000000012001ec84: 0000000120161ce3 2c 21
insmod(3755): unaligned trap at 000000012001ec84: 0000000120161d07 2c 21
--
Joerg Hoh
Reply to: