tulip and alpha error kernel 2.4.22
Hi all .
i have one alpha lx164 with debian (woody) and kernel 2.4.22.
#uname -a
Linux alpha 2.4.22 #7 Thu Nov 27 07:13:47 UYT 2003 alpha unknown
with a netgear ethernet
#lspci -vv
00:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
[FasterNet] (rev 22)
Subsystem: Netgear FA310TX Fast Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 96 (5000ns min, 10000ns max), cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 8000 [size=128]
Region 1: Memory at 000000000a854000 (32-bit, non-prefetchable)
[size=128]
Expansion ROM at 000000000a800000 [disabled] [size=256K]
when i start the interface with linux tulip driver i get
Nov 27 07:40:55 alpha kernel: eth0: (1) System Error occured (1)
Nov 27 07:40:55 alpha last message repeated 16 times
Nov 27 07:40:55 alpha kernel: eth0: (2) System Error occured (1)
Nov 27 07:40:55 alpha last message repeated 15 times
many times and i have to reset the server.
and with de4x5 driver i get
Nov 27 11:36:13 alpha kernel: eth0: Setup frame timed out, status
fc922000
Nov 27 11:36:13 alpha kernel: eth0: Setup frame timed out, status
fc902000
Nov 27 11:39:04 alpha kernel: eth0: media is 100Mb/s.
but it do not work
with scyld tulip driver i get the same error.
with kernel 2.2.20 works fine.
any idea?
Tks
Reply to: