[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: No sound on PWS500au (miata)



On Wed, 1 Oct 2003 09:53:59 -0400
Jay Estabrook <Jay.Estabrook@hp.com> wrote:

> On Wed, Oct 01, 2003 at 12:10:52PM +0200, Jan Hetges wrote:
> > 
> > I have a PWS500au running Debian testing/unstable with Kernel
> > 2.4.18-custom. I modprobe sb and everything seems to be fine
> >
> > dmesg output:
> >
> > Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
> > sb: No ISAPnP cards found, trying standard ones...
> > SB 3.01 detected OK (220)
> > ESS chip ES1888 detected
> > <ESS ES1888 AudioDrive (rev 11) (3.01)> at 0x220 irq 7 dma 1,5
> > 
> > ojeoje:~# lsmod
> > Module                  Size  Used by    Not tainted
> > sb                     10152   0  (unused)
> > sb_lib                 53582   0  [sb]
> > uart401                 8528   0  [sb_lib]
> > sound                  91048   0  [sb_lib uart401]
> > soundcore               6608   4  [sb_lib sound]
> > 
> > I can cat something>/dev/dsp and xmms seems to work too, 
> > is there something special I forgot, or seems my hardware to be defective?
> 
> Yes, it should NOT be IRQ 7, but IRQ 5.

I  tried IRQ 5,7 and 10, both SRM isacfg and module-parameter, but with no effect, seems really to be a hardware problem!

How can I tell SRM to completely switch off the onboard sound?
 
thx

-- tran

Attachment: pgppFed0va2LD.pgp
Description: PGP signature


Reply to: