re: SIIG pci combo 1394, usb2, 10/100 ethernet
On Wed, Jul 23, 2003 at 11:29:27PM -0400, Thomas Evans wrote:
>
> > BTW, I recently added a 1394 firewire interface to my PC164LX.
> > It works great. I get 27mb/sec to/from a firewire disk. The on board
> > IDE interface and Symbios SCSI interfaces only get 12-14mb/sec. USB 2.0
> > got around 17mb/sec before hanging. The 1394 interface is very stable
> > in 2.4.21; i've run large compiles (mozilla) on it without problems.
> >
> > The adaptor card I used was a SIIG combo 1394, usb2, 10/100 ethernet
> > PCI card.
>
> Do you know what ethernet controller this card uses?
02:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: AFAVLAB Technology Inc: Unknown device 8139
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at 9000 [size=256]
Memory at 000000000aa07000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
The '8139too' module appears to recognize the interface; though I don't
have a network cable plugged into it to test it with (and the back of
the machine is rather inaccessable at the moment, otherwise i'd try).
I have two other 21140 tulip interfaces in the machine.
-g
Reply to: