SMP on Alpha 2100 (Sable)
Now that I can finally boot my AS2100 with an SMP 2.4.x kernel (with
to the patch from Christopher C. Chimelis), I've found that SMP doesn't
work so well. When the first CPU boots, it registers 1082.96 BogoMIPS,
but when the second comes up it only gets 8.24 BogoMIPS. /proc/cpuinfo
reports two processors, but the machine feels like it only has one.
When I run two jobs on it both get 50% cpu (according to top).
I have tried removing each processor to make sure they work individually
(they do). I also had this problem with 2.2.x but never really
investigated it. Perhaps it's a hardware/firmware problem?
Does anyone have any suggestions how I can get both processors fully
working? I've attached "dmesg" output along with /proc/cpuinfo and my
kernel config. I defined DEBUG_SMP in linux/arch/alpha/kernel/smp.c, so
it's a little more verbose than usual.
Thanks,
Greg
Linux version 2.4.9 (root@fullass) (gcc version 2.95.4 20010810 (Debian prerelease)) #4 SMP Sun Aug 19 17:30:17 EDT 2001
Booting GENERIC on Sable using machine vector Sable from SRM
Command line: ro root=/dev/sda1 console=ttyS0
memcluster 0, usage 1, start 0, end 256
memcluster 1, usage 0, start 256, end 98295
memcluster 2, usage 1, start 98295, end 98304
freeing pages 256:384
freeing pages 887:98295
reserving pages 887:889
t2_init: HBASE was 0x2000
setup_smp: nr_processors 4
setup_smp: CPU 0: flags 0x1ed type 0x200000006
setup_smp: CPU 0: PAL rev 0x2012d
setup_smp: CPU 1: flags 0x1cc type 0x200000006
setup_smp: CPU 1: PAL rev 0x2012d
setup_smp: CPU 2: flags 0x0 type 0x0
setup_smp: CPU 2: PAL rev 0x0
setup_smp: CPU 3: flags 0x0 type 0x0
setup_smp: CPU 3: PAL rev 0x0
SMP: 2 CPUs probed -- cpu_present_mask = 3
On node 0 totalpages: 98295
zone(0): 98295 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/sda1 console=ttyS0
Using epoch = 1900
Setting RTC_FREQ to 1024 Hz (25)
Turning on RTC interrupts.
Calibrating delay loop... 1082.96 BogoMIPS
Memory: 767208k/786360k available (1766k kernel code, 17104k reserved, 1522k data, 368k init)
Dentry-cache hash table entries: 131072 (order: 8, 2097152 bytes)
Inode-cache hash table entries: 65536 (order: 7, 1048576 bytes)
Mount-cache hash table entries: 16384 (order: 5, 262144 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 524288 bytes)
Page-cache hash table entries: 131072 (order: 7, 1048576 bytes)
POSIX conformance testing by UNIFIX
SMP starting up secondaries.
smp_boot_one_cpu: CPU 1 state 0x0 flags 0x40
Starting secondary cpu 1: state 0x0 pal_flags 0x1
recv_secondary_console_msg: TXRDY 0x2.
CALLIN 1 state 0x0
recv_secondary_console_msg: TXRDY contains CPU 1.
recv_secondary_console_msg: on 0 from 1 HALT_REASON 0x0 FLAGS 0x1ef
recv_secondary_console_msg: on 0 message is 'P01>>>START P01>>>'
secondary_cpu_start: SUCCESS for CPU 1!!!
Calibrating delay loop... 8.24 BogoMIPS
SMP: Total of 2 processors activated (1096.45 BogoMIPS).
smp_callin: commencing CPU 1 current fffffc002ffe0000
got res[9000:90ff] for resource 0 of Symbios Logic Inc. (formerly NCR) 53c810
T2 machine check: vector=0x660 pc=0xfffffc000033207c code=0x10000008a
got res[9400:94ff] for resource 0 of Symbios Logic Inc. (formerly NCR) 53c810 (#2)
machine check type: OS-specific PAL bugcheck (retryable)
got res[9800:98ff] for resource 0 of Symbios Logic Inc. (formerly NCR) 53c810 (#3)
pc = [<fffffc000033207c>] ra = [<fffffc000033202c>] ps = 0000
got res[9c00:9c7f] for resource 0 of Digital Equipment Corporation DECchip 21040 [Tulip]
v0 = 0000000000000007 t0 = fffffc00006b0128 t1 = 0000000000000000
got res[9c80:9cff] for resource 0 of Digital Equipment Corporation DECchip 21140 [FasterNet]
t2 = 0000000000000000 t3 = fffffc0000594610 t4 = 00000000000008d4
got res[9000000:903ffff] for resource 6 of Digital Equipment Corporation DECchip 21140 [FasterNet]
t5 = 0000000000000000 t6 = fffffc00006b0aa8 t7 = fffffc002ffe0000
got res[9040000:90400ff] for resource 1 of Symbios Logic Inc. (formerly NCR) 53c810
a0 = 0000000000000000 a1 = 0000000000000000 a2 = fffffc00006ba581
got res[9041000:90410ff] for resource 1 of Symbios Logic Inc. (formerly NCR) 53c810 (#2)
a3 = 0000000000000000 a4 = fffffffffffffffe a5 = 000000000000000f
got res[9042000:90420ff] for resource 1 of Symbios Logic Inc. (formerly NCR) 53c810 (#3)
t8 = 0000000000000004 t9 = fffffc00006b0140 t10= fffffc00006b0aa0
got res[9043000:904307f] for resource 1 of Digital Equipment Corporation DECchip 21040 [Tulip]
t11= fffffc00006ba948 pv = fffffc0000323e40 at = fffffc00006b0118
got res[9044000:904407f] for resource 1 of Digital Equipment Corporation DECchip 21140 [FasterNet]
gp = fffffc00006aa018 sp = fffffc002ffe3ce8
PCI enable device: (Digital Equipment Corporation DECchip 21040 [Tulip])
cmd reg 0x7
PCI enable device: (Symbios Logic Inc. (formerly NCR) 53c810)
cmd reg 0x7
PCI enable device: (Intel Corporation 82375EB)
cmd reg 0x7
PCI enable device: (Digital Equipment Corporation DECchip 21140 [FasterNet])
cmd reg 0x7
PCI enable device: (Symbios Logic Inc. (formerly NCR) 53c810 (#2))
cmd reg 0x7
PCI enable device: (Symbios Logic Inc. (formerly NCR) 53c810 (#3))
cmd reg 0x7
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
rtc: Standard PC (1900) epoch (1900) detected
Real Time Clock Driver v1.10d
block: 128 slots per queue, batch=16
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
eth0: Digital DC21040 Tulip rev 35 at 0x9c00, 08:00:2B:E5:86:E1, IRQ 32.
tulip1: EEPROM default media type Autosense.
tulip1: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
tulip1: MII transceiver #1 config 3000 status 7829 advertising 01e1.
eth1: Digital DS21140 Tulip rev 34 at 0x9c80, 00:C0:F0:17:41:ED, IRQ 34.
SCSI subsystem driver Revision: 1.00
ncr53c8xx: at PCI bus 0, device 1, function 0
ncr53c8xx: 53c810 detected
ncr53c8xx: at PCI bus 0, device 7, function 0
ncr53c8xx: 53c810 detected
ncr53c8xx: at PCI bus 0, device 8, function 0
ncr53c8xx: 53c810 detected
ncr53c810-0: rev 0x2 on pci bus 0 device 1 function 0 irq 33
ncr53c810-0: ID 7, Fast-10, Parity Checking
ncr53c810-1: rev 0x1 on pci bus 0 device 7 function 0 irq 35
ncr53c810-1: ID 7, Fast-10, Parity Checking
ncr53c810-2: rev 0x1 on pci bus 0 device 8 function 0 irq 36
ncr53c810-2: ID 7, Fast-10, Parity Checking
scsi0 : ncr53c8xx-3.4.3b-20010512
scsi1 : ncr53c8xx-3.4.3b-20010512
scsi2 : ncr53c8xx-3.4.3b-20010512
Vendor: DEC Model: RZ28 (C) DEC Rev: 442D
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: RRD43 (C) DEC Rev: 1084
Type: CD-ROM ANSI SCSI revision: 02
Vendor: DEC Model: TZ87 (C) DEC Rev: 9B3C
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: DEC Model: RZ28M (C) DEC Rev: 0744
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: RZ28M (C) DEC Rev: 0744
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: RZ28 (C) DEC Rev: 442D
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: RZ28 (C) DEC Rev: D41C
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: RZ28 (C) DEC Rev: 442D
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: RZ28 (C) DEC Rev: 442D
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: RZ28 (C) DEC Rev: D41C
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Attached scsi disk sdc at scsi2, channel 0, id 1, lun 0
Attached scsi disk sdd at scsi2, channel 0, id 2, lun 0
Attached scsi disk sde at scsi2, channel 0, id 3, lun 0
Attached scsi disk sdf at scsi2, channel 0, id 4, lun 0
Attached scsi disk sdg at scsi2, channel 0, id 5, lun 0
Attached scsi disk sdh at scsi2, channel 0, id 6, lun 0
ncr53c810-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sda: 4110480 512-byte hdwr sectors (2105 MB)
Partition check:
/dev/scsi/host0/bus0/target1/lun0: p1 p2
ncr53c810-2-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sdb: 4110480 512-byte hdwr sectors (2105 MB)
/dev/scsi/host2/bus0/target0/lun0: p1
ncr53c810-2-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sdc: 4110480 512-byte hdwr sectors (2105 MB)
/dev/scsi/host2/bus0/target1/lun0: p1
ncr53c810-2-<2,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sdd: 4110480 512-byte hdwr sectors (2105 MB)
/dev/scsi/host2/bus0/target2/lun0: p1
ncr53c810-2-<3,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sde: 4110480 512-byte hdwr sectors (2105 MB)
/dev/scsi/host2/bus0/target3/lun0: p1
ncr53c810-2-<4,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sdf: 4110480 512-byte hdwr sectors (2105 MB)
/dev/scsi/host2/bus0/target4/lun0: p1
ncr53c810-2-<5,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sdg: 4110480 512-byte hdwr sectors (2105 MB)
/dev/scsi/host2/bus0/target5/lun0: p1
ncr53c810-2-<6,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sdh: 4110480 512-byte hdwr sectors (2105 MB)
/dev/scsi/host2/bus0/target6/lun0: p1
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
ncr53c810-0-<5,*>: FAST-5 SCSI 4.0 MB/s (250 ns, offset 8)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
md: raid5 personality registered
raid5: measuring checksumming speed
8regs : 802.816 MB/sec
32regs : 778.240 MB/sec
alpha : 802.816 MB/sec
alpha prefetch: 761.856 MB/sec
raid5: using function: alpha (802.816 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
(read) scsi/host2/bus0/target0/lun0/part1's sb offset: 2053184 [events: 0000001b]
(read) scsi/host2/bus0/target1/lun0/part1's sb offset: 2053184 [events: 0000001b]
(read) scsi/host2/bus0/target2/lun0/part1's sb offset: 2053184 [events: 0000001b]
(read) scsi/host2/bus0/target3/lun0/part1's sb offset: 2053184 [events: 0000001b]
(read) scsi/host2/bus0/target4/lun0/part1's sb offset: 2053184 [events: 0000001b]
(read) scsi/host2/bus0/target5/lun0/part1's sb offset: 2053184 [events: 0000001b]
(read) scsi/host2/bus0/target6/lun0/part1's sb offset: 2053184 [events: 0000001b]
md: autorun ...
md: considering scsi/host2/bus0/target6/lun0/part1 ...
md: adding scsi/host2/bus0/target6/lun0/part1 ...
md: adding scsi/host2/bus0/target5/lun0/part1 ...
md: adding scsi/host2/bus0/target4/lun0/part1 ...
md: adding scsi/host2/bus0/target3/lun0/part1 ...
md: adding scsi/host2/bus0/target2/lun0/part1 ...
md: adding scsi/host2/bus0/target1/lun0/part1 ...
md: adding scsi/host2/bus0/target0/lun0/part1 ...
md: created md0
md: bind<scsi/host2/bus0/target0/lun0/part1,1>
md: bind<scsi/host2/bus0/target1/lun0/part1,2>
md: bind<scsi/host2/bus0/target2/lun0/part1,3>
md: bind<scsi/host2/bus0/target3/lun0/part1,4>
md: bind<scsi/host2/bus0/target4/lun0/part1,5>
md: bind<scsi/host2/bus0/target5/lun0/part1,6>
md: bind<scsi/host2/bus0/target6/lun0/part1,7>
md: running: <scsi/host2/bus0/target6/lun0/part1><scsi/host2/bus0/target5/lun0/part1><scsi/host2/bus0/target4/lun0/part1><scsi/host2/bus0/target3/lun0/part1><scsi/host2/bus0/target2/lun0/part1><scsi/host2/bus0/target1/lun0/part1><scsi/host2/bus0/target0/lun0/part1>
md: now!
md: scsi/host2/bus0/target6/lun0/part1's event counter: 0000001b
md: scsi/host2/bus0/target5/lun0/part1's event counter: 0000001b
md: scsi/host2/bus0/target4/lun0/part1's event counter: 0000001b
md: scsi/host2/bus0/target3/lun0/part1's event counter: 0000001b
md: scsi/host2/bus0/target2/lun0/part1's event counter: 0000001b
md: scsi/host2/bus0/target1/lun0/part1's event counter: 0000001b
md: scsi/host2/bus0/target0/lun0/part1's event counter: 0000001b
md0: max total readahead window set to 1440k
md0: 6 data-disks, max readahead per data-disk: 240k
raid5: device scsi/host2/bus0/target6/lun0/part1 operational as raid disk 3
raid5: device scsi/host2/bus0/target5/lun0/part1 operational as raid disk 6
raid5: device scsi/host2/bus0/target4/lun0/part1 operational as raid disk 5
raid5: device scsi/host2/bus0/target3/lun0/part1 operational as raid disk 4
raid5: device scsi/host2/bus0/target2/lun0/part1 operational as raid disk 0
raid5: device scsi/host2/bus0/target1/lun0/part1 operational as raid disk 2
raid5: device scsi/host2/bus0/target0/lun0/part1 operational as raid disk 1
raid5: allocated 14934kB for md0
raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2
RAID5 conf printout:
--- rd:7 wd:7 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:scsi/host2/bus0/target2/lun0/part1
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:scsi/host2/bus0/target0/lun0/part1
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:scsi/host2/bus0/target1/lun0/part1
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:scsi/host2/bus0/target6/lun0/part1
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:scsi/host2/bus0/target3/lun0/part1
disk 5, s:0, o:1, n:5 rd:5 us:1 dev:scsi/host2/bus0/target4/lun0/part1
disk 6, s:0, o:1, n:6 rd:6 us:1 dev:scsi/host2/bus0/target5/lun0/part1
RAID5 conf printout:
--- rd:7 wd:7 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:scsi/host2/bus0/target2/lun0/part1
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:scsi/host2/bus0/target0/lun0/part1
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:scsi/host2/bus0/target1/lun0/part1
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:scsi/host2/bus0/target6/lun0/part1
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:scsi/host2/bus0/target3/lun0/part1
disk 5, s:0, o:1, n:5 rd:5 us:1 dev:scsi/host2/bus0/target4/lun0/part1
disk 6, s:0, o:1, n:6 rd:6 us:1 dev:scsi/host2/bus0/target5/lun0/part1
md: updating md0 RAID superblock on device
md: scsi/host2/bus0/target6/lun0/part1 [events: 0000001c](write) scsi/host2/bus0/target6/lun0/part1's sb offset: 2053184
md: scsi/host2/bus0/target5/lun0/part1 [events: 0000001c](write) scsi/host2/bus0/target5/lun0/part1's sb offset: 2053184
md: scsi/host2/bus0/target4/lun0/part1 [events: 0000001c](write) scsi/host2/bus0/target4/lun0/part1's sb offset: 2053184
md: scsi/host2/bus0/target3/lun0/part1 [events: 0000001c](write) scsi/host2/bus0/target3/lun0/part1's sb offset: 2053184
md: scsi/host2/bus0/target2/lun0/part1 [events: 0000001c](write) scsi/host2/bus0/target2/lun0/part1's sb offset: 2053184
md: scsi/host2/bus0/target1/lun0/part1 [events: 0000001c](write) scsi/host2/bus0/target1/lun0/part1's sb offset: 2053184
md: scsi/host2/bus0/target0/lun0/part1 [events: 0000001c](write) scsi/host2/bus0/target0/lun0/part1's sb offset: 2053184
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 65536 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 368k freed
Adding Swap: 1029104k swap-space (priority -1)
raid5: switching cache buffer size, 8192 --> 1024
raid5: switching cache buffer size, 1024 --> 4096
reiserfs: checking transaction log (device 09:00) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
eth1: Setting full-duplex based on MII#1 link partner capability of 45e1.
LVM version 0.9.1_beta2 by Heinz Mauelshagen (18/01/2001)
lvm -- Module successfully initialized
cpu : Alpha
cpu model : EV45
cpu variation : 7
cpu revision : 0
cpu serial number :
system type : Sable
system variation : 0
system revision : 0
system serial number :
cycle frequency [Hz] : 274725274
timer frequency [Hz] : 1024.00
page size [bytes] : 8192
phys. address bits : 34
max. addr. space # : 63
BogoMIPS : 8.24
kernel unaligned acc : 8052 (pc=fffffc00003dec70,va=fffffc0027a8952a)
user unaligned acc : 0 (pc=0,va=0)
platform string : AlphaServer 2100 4/275
cpus detected : 2
cpus active : 2
cpu active mask : 0000000000000003
#
# Automatically generated make config: don't edit
#
CONFIG_ALPHA=y
# CONFIG_UID16 is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# General setup
#
CONFIG_ALPHA_GENERIC=y
# CONFIG_ALPHA_ALCOR is not set
# CONFIG_ALPHA_XL is not set
# CONFIG_ALPHA_BOOK1 is not set
# CONFIG_ALPHA_AVANTI is not set
# CONFIG_ALPHA_CABRIOLET is not set
# CONFIG_ALPHA_DP264 is not set
# CONFIG_ALPHA_EB164 is not set
# CONFIG_ALPHA_EB64P is not set
# CONFIG_ALPHA_EB66 is not set
# CONFIG_ALPHA_EB66P is not set
# CONFIG_ALPHA_EIGER is not set
# CONFIG_ALPHA_JENSEN is not set
# CONFIG_ALPHA_LX164 is not set
# CONFIG_ALPHA_MIATA is not set
# CONFIG_ALPHA_MIKASA is not set
# CONFIG_ALPHA_NAUTILUS is not set
# CONFIG_ALPHA_NONAME is not set
# CONFIG_ALPHA_NORITAKE is not set
# CONFIG_ALPHA_PC164 is not set
# CONFIG_ALPHA_P2K is not set
# CONFIG_ALPHA_RAWHIDE is not set
# CONFIG_ALPHA_RUFFIAN is not set
# CONFIG_ALPHA_RX164 is not set
# CONFIG_ALPHA_SX164 is not set
# CONFIG_ALPHA_SABLE is not set
# CONFIG_ALPHA_SHARK is not set
# CONFIG_ALPHA_TAKARA is not set
# CONFIG_ALPHA_TITAN is not set
# CONFIG_ALPHA_WILDFIRE is not set
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_SBUS is not set
# CONFIG_MCA is not set
CONFIG_PCI=y
CONFIG_ALPHA_BROKEN_IRQ_MASK=y
CONFIG_SMP=y
# CONFIG_DISCONTIGMEM is not set
# CONFIG_ALPHA_LARGE_VMALLOC is not set
CONFIG_PCI_NAMES=y
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_EM86=m
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_SUNBPP is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
CONFIG_PNP=y
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=y
CONFIG_BLK_DEV_LVM=m
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_INET_ECN=y
# CONFIG_SYN_COOKIES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IPV6=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_NCR53C8XX=y
# CONFIG_SCSI_SYM53C8XX is not set
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_DEBUG is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_ARM_AM79C961A is not set
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_JOYSTICK is not set
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_EFS_FS=m
# CONFIG_JFFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_TMPFS=y
CONFIG_RAMFS=m
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
CONFIG_MINIX_FS=m
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Input core support
#
# CONFIG_INPUT is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
CONFIG_MATHEMU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_ALPHA_LEGACY_START_ADDRESS=y
Reply to: