Re: UDB (multia) Kernel Panic from SRM/MILO
Steve Udell wrote:
>
> Erwin Kloosdijk wrote:
> >
> > Hi Steve,
> >
> > Steve Udell wrote:
> > > ...
> >
> > > Under SRM and 4.33 firmware update and a new battery(11bucks)
> > > I do this:
> > > >>> boot dva0
> > > MILO> boot fd0:linux root=/dev/sda1 load_ramdisk=1 prompt_ramdisk=1
> > It could be that MILO or the kernel got a bit confused by the fact that
> > the root file system resides in /dev/sda1, but it is still forced to use
> > a ramdisk. I don't know whether ramdisks on non-floppy devices are
> > supported. Try the command at the MILO> prompt without the two ramdisk
> > options.
>
> I tried this, doesn't get me any further.
> I think this is where "debian" opens up its graphical install...
> Saying where its kernel panicing opening up (/dev/console).
(update)
Well comming from SRM or ARC, I am getting kernel panics..
Useing the rescue.bin(noname) from http://lhpca.univ-lyon1.fr/axp/debian.html
I am getting a slightly different dead end..(I wrote it down)
--
Partition check
sda: sda1
VFS: Insert root floppy to be loaded into the ramdisk and press enter.
reading iso first volume descripter
looking for iso ID
RAMDISK: ex2 filesystem found at block 0
RAMDISK: Image too big! (523915/4096 blocks)
VFS: Mounted root (ext2 filesystem) readonly
Warning: Unable to open an initial console (/dev/console).
Kernel Panic: Cannot open initial console
This was got from:
MILO> boot fd0:linux root=/dev/sda1 load_ramdisk=1 prompt_ramdisk=1
useing boot fd0:linux root=/dev/fd0 .... says cant load from 002(floppy)
this is useing 2 disks the rescue and the root..
Can someone help :)
Reply to: