Re: OT, Ubuntu Sound Trouble
Have you tried orca --replace lately?
--
Jude <jdashiel at panix dot com>
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and amo.
Please use in that order."
Ed Howdershelt 1940.
On Tue, 28 Mar 2023, K0LNY_Glenn wrote:
> There are two choices when I press F6, the Intel PCI audio and USB1.
> The latter is likely the USB audio card, but I tried both anyway, and the
> audio comes out the external USB soundcard, in the terminal.
> That is with all terminal audio tests.
> But either choice gives me nothing in the GUI with Orca.
>
> Glenn
> ----- Original Message -----
> From: "Jude DaShiell" <jdashiel@panix.com>
> To: "K0LNY_Glenn" <glenn@ervin.email>;
> <debian-accessibility@lists.debian.org>
> Sent: Tuesday, March 28, 2023 5:58 PM
> Subject: Re: OT, Ubuntu Sound Trouble
>
>
> I hate pulseaudio! The information generated by pactl is very nearly
> useless.
> See if you can run alsamixer hit f6 select USB Audio and hit enter.
> After that a ways down the screen there's going to be lots of m's. try
> arrowing into that mess and see if you can change those m's to u's then
> take the percentages up. You may have to use tab to navigate those
> controls I normally avoid alsamixer and prefer amixer since it's simpler.
>
>
> -- Jude <jdashiel at panix dot com> "There are four boxes to be used in
> defense of liberty: soap, ballot, jury, and amo. Please use in that
> order." Ed Howdershelt 1940.
>
> On Tue, 28 Mar 2023, K0LNY_Glenn wrote:
>
> > Hi Jude,
> > I think card 0 is unmuted, but I don't know how to select it as the main
> > source.
> > I tried
> > pacmd set-default-sink card0
> > and it did not recognize card0 or card 0 as a device name.
> > Based on the below, from pacmd list-sinks
> > I get the list, but I don't know what name to use:
> >
> > Thanks:
> > 1 sink(s) available.
> > * index: 0
> > name:
> > <alsa_output.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-stereo>
> > driver: <module-alsa-card.c>
> > flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
> > DYNAMIC_LATENCY
> > state: SUSPENDED
> > suspend cause: IDLE
> > priority: 9049
> > volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46%
> > / -20.00 dB
> > balance 0.00
> > base volume: 65536 / 100% / 0.00 dB
> > volume steps: 65537
> > muted: no
> > current latency: 0.00 ms
> > max request: 0 KiB
> > max rewind: 0 KiB
> > monitor source: 0
> > sample spec: s16le 2ch 44100Hz
> > channel map: front-left,front-right
> > Stereo
> > used by: 0
> > linked by: 0
> > configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
> > card: 0 <alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00>
> > module: 7
> > properties:
> > alsa.resolution_bits = "16"
> > device.api = "alsa"
> > device.class = "sound"
> > alsa.class = "generic"
> > alsa.subclass = "generic-mix"
> > alsa.name = "USB Audio"
> > alsa.id = "USB Audio"
> > alsa.subdevice = "0"
> > alsa.subdevice_name = "subdevice #0"
> > alsa.device = "0"
> > alsa.card = "1"
> > alsa.card_name = "USB Audio Device"
> > alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at
> > usb-0000:00:14.0-1.1, full speed"
> > alsa.driver_name = "snd_usb_audio"
> > device.bus_path = "pci-0000:00:14.0-usb-0:1.1:1.0"
> > sysfs.path =
> > "/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/sound/card1"
> > udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
> > device.bus = "usb"
> > device.vendor.id = "0d8c"
> > device.vendor.name = "C-Media Electronics, Inc."
> > device.product.id = "0014"
> > device.product.name = "Audio Adapter (Unitek Y-247A)"
> > device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
> > device.string = "front:1"
> > device.buffering.buffer_size = "352800"
> > device.buffering.fragment_size = "176400"
> > device.access_mode = "mmap+timer"
> > device.profile.name = "analog-stereo"
> > device.profile.description = "Analog Stereo"
> > device.description = "Audio Adapter (Unitek Y-247A) Analog Stereo"
> > alsa.mixer_name = "USB Mixer"
> > alsa.components = "USB0d8c:0014"
> > module-udev-detect.discovered = "1"
> > device.icon_name = "audio-card-usb"
> > ports:
> > analog-output-speaker: Speakers (priority 10000, latency offset 0 usec,
> > available: unknown)
> > properties:
> > device.icon_name = "audio-speakers"
> > active port: <analog-output-speaker>
> >
> > ----- Original Message -----
> > From: "Jude DaShiell" <jdashiel@panix.com>
> > To: "K0LNY_Glenn" <glenn@ervin.email>;
> > <debian-accessibility@lists.debian.org>
> > Sent: Tuesday, March 28, 2023 5:33 PM
> > Subject: Re: OT, Ubuntu Sound Trouble
> >
> >
> > Try running pulseaudio in ssh with nothing on the command line, that may
> > start it up.
> >
> >
> >
>
>
Reply to:
- References:
- OT, Ubuntu Sound Trouble
- From: "K0LNY_Glenn" <glenn@ervin.email>
- Re: OT, Ubuntu Sound Trouble
- From: Jude DaShiell <jdashiel@panix.com>
- Re: OT, Ubuntu Sound Trouble
- From: "K0LNY_Glenn" <glenn@ervin.email>
- Re: OT, Ubuntu Sound Trouble
- From: Jude DaShiell <jdashiel@panix.com>
- Re: OT, Ubuntu Sound Trouble
- From: "K0LNY_Glenn" <glenn@ervin.email>
- Re: OT, Ubuntu Sound Trouble
- From: Jude DaShiell <jdashiel@panix.com>
- Re: OT, Ubuntu Sound Trouble
- From: "K0LNY_Glenn" <glenn@ervin.email>
- Re: OT, Ubuntu Sound Trouble
- From: Jude DaShiell <jdashiel@panix.com>
- Re: OT, Ubuntu Sound Trouble
- From: "K0LNY_Glenn" <glenn@ervin.email>
- Re: OT, Ubuntu Sound Trouble
- From: Jude DaShiell <jdashiel@panix.com>
- Re: OT, Ubuntu Sound Trouble
- From: "K0LNY_Glenn" <glenn@ervin.email>
- Re: OT, Ubuntu Sound Trouble
- From: Jude DaShiell <jdashiel@panix.com>
- Re: OT, Ubuntu Sound Trouble
- From: "K0LNY_Glenn" <glenn@ervin.email>
- Re: OT, Ubuntu Sound Trouble
- From: Jude DaShiell <jdashiel@panix.com>
- Re: OT, Ubuntu Sound Trouble
- From: "K0LNY_Glenn" <glenn@ervin.email>