Re: Sound card not detected by the incoming Debian installer for Debian 10
Shouldn't speakup install be delayed until after sound initialization
completes?
On Tue, 25 Jun 2019, Didier Spaier wrote:
> Date: Tue, 25 Jun 2019 17:24:52
> From: Didier Spaier <didier@slint.fr>
> To: debian-accessibility@lists.debian.org
> Subject: Re: Sound card not detected by the incoming Debian installer for
> Debian 10
> Resent-Date: Tue, 25 Jun 2019 21:25:08 +0000 (UTC)
> Resent-From: debian-accessibility@lists.debian.org
>
> Hello,
>
> On 6/25/19 5:06 PM, Samuel Thibault wrote:
> > Didier Spaier, le mar. 25 juin 2019 16:58:26 +0200, a ecrit:
> >> 2. As soon as tty2 becomes available type in it lsmod|sort>a
> >> 3. Later in the startup process type lsmod|sort>b
> >
> > How much later is that?
>
> not a direct answer but this quote of dmesg from the Debian installer looks
> weird:
>
>
> [ 4.092887] speakup: module is from the staging directory, the quality is
> unknown, you have been warned.
> [ 4.094581] input: Speakup as /devices/virtual/input/input5
> [ 4.094721] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
> [ 4.095264] speakup 3.1.6: initialized
> [ 4.095265] synth name on entry is: soft
> [ 4.095940] speakup_soft: module is from the staging directory, the quality
> is unknown, you have been warned.
> [ 4.096109] synth probe
> [ 4.096159] initialized device: /dev/softsynth, node (MAJOR 10, MINOR 26)
> [ 4.096160] initialized device: /dev/softsynthu, node (MAJOR 10, MINOR 27)
> [ 39.518901] random: crng init done
> [ 62.626986] usb 1-1.2: USB disconnect, device number 3
> [ 62.658872] snd_hda_intel 0000:00:1b.0: couldn't bind with audio component
> [ 62.678643] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
> [ 62.679105] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590:
> line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
> [ 62.679106] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0
> (0x0/0x0/0x0/0x0/0x0)
> [ 62.679107] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2
> (0x1c/0x19/0x0/0x0/0x0)
> [ 62.679108] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
> [ 62.679108] snd_hda_codec_conexant hdaudioC0D0: inputs:
> [ 62.679110] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
> [ 62.679110] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
> [ 62.679111] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
> [ 62.680399] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for
> stable communication
> [ 62.680962] snd_hda_codec_conexant hdaudioC0D0: Failed to find
> thinkpad-acpi symbol tpacpi_led_set
> [ 62.683994] input: HDA Intel PCH Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
> [ 62.684034] input: HDA Intel PCH Dock Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> [ 62.684070] input: HDA Intel PCH Dock Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> [ 62.684121] input: HDA Intel PCH Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> [ 64.130887] usb 1-1.2: new low-speed USB device number 6 using ehci-pci
>
> So it takes nearly one minute before the snd_hda_codes be loaded.
>
> In case of Slint startup this occurs way sooner:
>
> [ 8.166945] fbcon: inteldrmfb (fb0) is primary device
> [ 8.167569] nouveau 0000:01:00.0: i2c: aux 000a: address-only transaction
> dropped
> [ 8.167584] nouveau 0000:01:00.0: i2c: aux 000a: address-only transaction
> dropped
> [ 8.189455] nouveau 0000:01:00.0: i2c: aux 000c: address-only transaction
> dropped
> [ 8.189466] nouveau 0000:01:00.0: i2c: aux 000c: address-only transaction
> dropped
> [ 8.233873] firewire_core 0000:0d:00.3: created device fw0: GUID
> f0def1ffcbed60ff, S400
> [ 8.695890] psmouse serio1: synaptics: queried max coordinates: x [..5888],
> y [..4820]
> [ 8.799703] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id:
> 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
> [ 8.799718] psmouse serio1: synaptics: serio: Synaptics pass-through port
> at isa0060/serio1/input0
> [ 8.864606] input: SynPS/2 Synaptics TouchPad as
> /devices/platform/i8042/serio1/input/input8
> [ 9.094933] Console: switching to colour frame buffer device 240x67
> [ 9.121739] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 9.153881] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
> [ 9.154352] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590:
> line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
> [ 9.154354] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0
> (0x0/0x0/0x0/0x0/0x0)
> [ 9.154356] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2
> (0x1c/0x19/0x0/0x0/0x0)
> [ 9.154358] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
> [ 9.154359] snd_hda_codec_conexant hdaudioC0D0: inputs:
> [ 9.154361] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
> [ 9.154363] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
> [ 9.154364] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
> [ 9.155660] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for
> stable communication
> [ 9.162236] input: HDA Intel PCH Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> [ 9.162304] input: HDA Intel PCH Dock Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> [ 9.162368] input: HDA Intel PCH Dock Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
> [ 9.163280] input: HDA Intel PCH Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
> [ 9.744511] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e,
> buttons: 3/3
> [ 10.079295] input: TPPS/2 IBM TrackPoint as
> /devices/platform/i8042/serio1/serio2/input/input12
> [ 12.540339] fuse init (API version 7.27)
> [ 13.487618] EXT4-fs (sdb4): re-mounted. Opts: (null)
>
> This is from an installed system kernel 2.19.52, as dmesg in Slint installer
> has no timing.
>
> Didier
>
>
>
--
Reply to: