[PATCH 2/2] m68k/atari - atafb: convert allocation of fb ram to new interface
The new atari_stram_alloc interface returns kernel virtual addresses
even if the kernel runs in FastRAM. These addresses are not
guaranteed to be identical with the physical addresses. Since ST-RAM
mappings have not been set up by mem_init, virt_to_phys() and its
cousin do not work and the atari_stram_to_phys() etc. helpers must
be used to determine physical addresses.
fb.fix->smem_start needs physical addresses, fb.par->screen_base
needs virtual addresses. Take care of the virt-to-phys conversion
both on fb init and par changes.
Signed-off-by: Michael Schmitz <schmitz@debian.org>
---
drivers/video/atafb.c | 27 +++++++++++++++++----------
1 files changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index e21d1f5..b0d3e42 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -790,7 +790,7 @@ static void tt_get_par(struct atafb_par *par)
addr = ((shifter.bas_hi & 0xff) << 16) |
((shifter.bas_md & 0xff) << 8) |
((shifter.bas_lo & 0xff));
- par->screen_base = phys_to_virt(addr);
+ par->screen_base = atari_stram_to_virt(addr);
}
static void tt_set_par(struct atafb_par *par)
@@ -1584,7 +1584,7 @@ static void falcon_get_par(struct atafb_par *par)
addr = (shifter.bas_hi & 0xff) << 16 |
(shifter.bas_md & 0xff) << 8 |
(shifter.bas_lo & 0xff);
- par->screen_base = phys_to_virt(addr);
+ par->screen_base = atari_stram_to_virt(addr);
/* derived parameters */
hw->ste_mode = (hw->f_shift & 0x510) == 0 && hw->st_shift == 0x100;
@@ -1980,7 +1980,7 @@ static void stste_get_par(struct atafb_par *par)
((shifter.bas_md & 0xff) << 8);
if (ATARIHW_PRESENT(EXTD_SHIFTER))
addr |= (shifter.bas_lo & 0xff);
- par->screen_base = phys_to_virt(addr);
+ par->screen_base = atari_stram_to_virt(addr);
}
static void stste_set_par(struct atafb_par *par)
@@ -2039,7 +2039,7 @@ static int stste_detect(void)
static void stste_set_screen_base(void *s_base)
{
unsigned long addr;
- addr = virt_to_phys(s_base);
+ addr = atari_stram_to_phys(s_base);
/* Setup Screen Memory */
shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
@@ -2286,7 +2286,7 @@ static void set_screen_base(void *s_base)
{
unsigned long addr;
- addr = virt_to_phys(s_base);
+ addr = atari_stram_to_phys(s_base);
/* Setup Screen Memory */
shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
@@ -2433,7 +2433,8 @@ static void atafb_set_disp(struct fb_info *info)
atafb_get_var(&info->var, info);
atafb_get_fix(&info->fix, info);
- info->screen_base = (void *)info->fix.smem_start;
+ /* Note: smem_start derives from real_screen_base, not screen_base! */
+ info->screen_base = atari_stram_to_virt(info->fix.smem_start);
}
static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
@@ -3166,15 +3167,21 @@ int __init atafb_init(void)
memset(screen_base, 0, mem_req);
pad = -(unsigned long)screen_base & (PAGE_SIZE - 1);
screen_base += pad;
- real_screen_base = screen_base + ovsc_offset;
+ real_screen_base = (void *) atari_stram_to_phys(screen_base + ovsc_offset);
screen_len = (mem_req - pad - ovsc_offset) & PAGE_MASK;
st_ovsc_switch();
if (CPU_IS_040_OR_060) {
/* On a '040+, the cache mode of video RAM must be set to
* write-through also for internal video hardware! */
- cache_push(virt_to_phys(screen_base), screen_len);
- kernel_set_cachemode(screen_base, screen_len,
- IOMAP_WRITETHROUGH);
+ if ((unsigned long) screen_base & 0xFF000000) {
+ /* If the kernel is not residing in ST-RAM, we use
+ * the mapping set up in head.S for the low 4MB of
+ * ST-RAM. This mapping is nocache/serialized so
+ * no tweaking of cache mode is needed here */
+ cache_push(atari_stram_to_phys(screen_base), screen_len);
+ kernel_set_cachemode(screen_base, screen_len,
+ IOMAP_WRITETHROUGH);
+ }
}
printk("atafb: screen_base %p real_screen_base %p screen_len %d\n",
screen_base, real_screen_base, screen_len);
--
1.7.0.4
Reply to: