Re: 2.6.17 vs. Q950
On Fri, Sep 15, 2006 at 09:16:17AM -0500, Stephen R Marenka wrote:
> I'm trying kernel 2.6.17-8 on zeus, my Quadra 950.
>
> So I boot with Penguin root=/dev/sda8 mac53c9x=2,0
> and I get the following error (manually-typed in).
>
> | esp: using quick version
> | esp: addr at 0x50f0f402
> | SCSI ID 7 Clk 25Mhz CCF=5 TOut 167 NCR53C9x(esp236)
> |
> | mac_esp: 2 esp controllers found
> | scsi0 : ESP236 (NCR53C9x)
> | Vendor: QUANTUM Model: FIREBALL ST4.3S Rev: 0F0C
> | Type: Direct-Access ANSI SCSI revision: 02
> | Vendor: QUANTUM Model: ATLAS V 9 SCA Rev: 0201
> | Type: Direct-Access ANSI SCSI revision: 03
> | scsi1 : ESP236 (NCR53C9x)
> | esp1: Aborting command
> | esp1: dumping state
> | esp1: SW [sreg<00> sstep<00> ireg<00>]
> | esp1: HW reread [sreg<00> sstep<c0> ireg<20>]
> | esp1: current command [tgt<00> lun<00> pphase<UNISSUED> cphase<SLCTNORM>]
> | esp1: disconnected
> | esp1: Aborting command
> | esp1: dumping state
> | esp1: SW [sreg<00> sstep<00> ireg<00>]
> | esp1: HW reread [sreg<00> sstep<c0> ireg<40>]
> | esp1: current command [tgt<00> lun<00> pphase<UNISSUED> cphase<UNISSUED>]
> | esp1: disconnected
> | esp1: Resetting scsi bus
>
>
> Booting Penguin root=/dev/sda8 mac53c9x=1,0 booted successfully. I guess
> that second scsi bus is a problem. :)
>
> Sonic didn't seem to load up, so I couldn't use the net. Perhaps it
> wasn't compiled in? I'll have to check that later.
>
> Surprisingly the keyboard seemed to work, but with a different keymap.
> Any ideas what I should try to straighten that out?
>
> No keyboard, no network, but progress.
>
> I see -9 is out, any reason it should be any different?
No, there where no changes in the m68k patches. But it would be good if
somebody tested the kernel, as you know I havent't rebooted tanda yet.
Christian
Reply to: