I'm trying kernel 2.6.17-8 on zeus, my Quadra 950. So I boot with Penguin root=/dev/sda8 mac53c9x=2,0 and I get the following error (manually-typed in). | esp: using quick version | esp: addr at 0x50f0f402 | SCSI ID 7 Clk 25Mhz CCF=5 TOut 167 NCR53C9x(esp236) | | mac_esp: 2 esp controllers found | scsi0 : ESP236 (NCR53C9x) | Vendor: QUANTUM Model: FIREBALL ST4.3S Rev: 0F0C | Type: Direct-Access ANSI SCSI revision: 02 | Vendor: QUANTUM Model: ATLAS V 9 SCA Rev: 0201 | Type: Direct-Access ANSI SCSI revision: 03 | scsi1 : ESP236 (NCR53C9x) | esp1: Aborting command | esp1: dumping state | esp1: SW [sreg<00> sstep<00> ireg<00>] | esp1: HW reread [sreg<00> sstep<c0> ireg<20>] | esp1: current command [tgt<00> lun<00> pphase<UNISSUED> cphase<SLCTNORM>] | esp1: disconnected | esp1: Aborting command | esp1: dumping state | esp1: SW [sreg<00> sstep<00> ireg<00>] | esp1: HW reread [sreg<00> sstep<c0> ireg<40>] | esp1: current command [tgt<00> lun<00> pphase<UNISSUED> cphase<UNISSUED>] | esp1: disconnected | esp1: Resetting scsi bus Booting Penguin root=/dev/sda8 mac53c9x=1,0 booted successfully. I guess that second scsi bus is a problem. :) Sonic didn't seem to load up, so I couldn't use the net. Perhaps it wasn't compiled in? I'll have to check that later. Surprisingly the keyboard seemed to work, but with a different keymap. Any ideas what I should try to straighten that out? No keyboard, no network, but progress. I see -9 is out, any reason it should be any different? Thanks, Stephen -- Stephen R. Marenka If life's not fun, you're not doing it right! <stephen@marenka.net>
Attachment:
signature.asc
Description: Digital signature