Re: linux-image-2.6.15-6 (was: Solution for issue with PicassoII and flickering pixels)
On 10.02.2006, Christian Steigies wrote:
> Hi,
> I am uploading linux-2.6 (2.6.15-6) for m68k, the linux-images are already
> available on my linux-image page
>
> http://people.debian.org/~cts/debian-m68k/linux-image/
>
> With these images, several problems should be fixed, everybody please
> test: - picasso2 flickering pixels
I gave it a try, but it was only partially successful. Booting went fine,
but the Kernel used the afb framebuffer. Due to the scan ranges of my
monitor, I did not see anything on the screen.
Keyboard seems to work. I managed to log in (blindly...) and save a log from
dmesg in a file. Loading the cirrusfb module using modprobe did not result
in a display on the screen.
I added cirrusfb to my modules file and rebooted - again nothing on the
screen. Logging into the box from the network did not work either (does
work with 2.4.27 kernel).
So my testing capabilities are rather limited. All I can offer are two
output files from dmesg attached to this message (first one without
cirrusfb in modules, second one with).
How can I concince the kernel to use cirrusfb instead of afb? Is there an
option for amiboot like video=clgen for the 2.4.27 kernel?
>- IDE buddha (and gayle, but that
> probably worked in -4 already) boot problem - mac SCSI fix
> - amiga keymaps should work again
>
> I hope I did not forget anything, but the rumor is, there will another
> upload soon.
>
> Christian
>
>
Best Regards,
Peter
Linux version 2.6.15-1-amiga (Debian 2.6.15-6) (fs@debian.org) (gcc version 3.3.6) #1 Fri Feb 10 20:43:58 CET 2006
Enabling workaround for errata I14
Amiga hardware found: [A2000] VIDEO BLITTER AUDIO FLOPPY KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA DENISE_HR AGNUS_HR_PAL ZORRO
On node 0 totalpages: 16256
DMA zone: 16256 pages, LIFO batch:3
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Built 1 zonelists
Kernel command line: root=/dev/sdb3 video=clgen:monitorcap:56;75;31;61
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61732k/65024k available (1876k kernel code, 1236k data, 120k init)
Calibrating delay loop... 99.53 BogoMIPS (lpj=497664)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
Zorro: Probing AutoConfig expansion devices: 5 devices
audit: initializing netlink socket (disabled)
audit(1137066293.350:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ami_decode_var: double mode only possible with aga
ami_decode_var: double mode only possible with aga
Console: switching to colour frame buffer device 80x32
fb0: Amiga ECS frame buffer device, using 640K of video memory
Amiga-builtin serial driver version 4.30
ttyS0 is the amiga builtin serial port
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide0: X-Surf IDE interface
ide1: X-Surf IDE interface
Probing IDE interface ide0...
Probing IDE interface ide1...
SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast)
esp0: FAST chip is Emulex FAS236 (family=2, version=3)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Blizzard2060 SCSI
Vendor: IBM Model: DCAS-32160 Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: DCAS-34330 Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB)
SCSI device sda: drive cache: write back
sda: RDSK (512) sda1 (DOS^C)(res 2 spb 1) sda2 (SWP^@)(res 2 spb 1) sda3 (LNX^@)(res 2 spb 1)
sd 0:0:0:0: Attached scsi disk sda
esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sdb: 8467200 512-byte hdwr sectors (4335 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 8467200 512-byte hdwr sectors (4335 MB)
SCSI device sdb: drive cache: write back
sdb: RDSK (512) sdb1 (DOS^C)(res 2 spb 1) sdb2 (LNX^@)(res 2 spb 1) sdb3 (LNX^@)(res 2 spb 1) sdb4 (SWP^@)(res 2 spb 1) sdb5 (LNX^@)(res 2 spb 1)
sd 0:0:1:0: Attached scsi disk sdb
mice: PS/2 mouse device common for all mice
input: Amiga Keyboard as /class/input/input0
input: Amiga mouse as /class/input/input1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Adding 125432k swap on /dev/sdb4. Priority:-1 extents:1 across:125432k
EXT3 FS on sdb3, internal journal
eth0: X-Surf at 0x00ed0000, Ethernet Address 52:54:40:28:b2:0f
Linux version 2.6.15-1-amiga (Debian 2.6.15-6) (fs@debian.org) (gcc version 3.3.6) #1 Fri Feb 10 20:43:58 CET 2006
Enabling workaround for errata I14
Amiga hardware found: [A2000] VIDEO BLITTER AUDIO FLOPPY KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA DENISE_HR AGNUS_HR_PAL ZORRO
On node 0 totalpages: 16256
DMA zone: 16256 pages, LIFO batch:3
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Built 1 zonelists
Kernel command line: root=/dev/sdb3 video=cirrus
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61732k/65024k available (1876k kernel code, 1236k data, 120k init)
Calibrating delay loop... 99.53 BogoMIPS (lpj=497664)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
Zorro: Probing AutoConfig expansion devices: 5 devices
audit: initializing netlink socket (disabled)
audit(1134389410.350:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ami_decode_var: double mode only possible with aga
ami_decode_var: double mode only possible with aga
Console: switching to colour frame buffer device 80x32
fb0: Amiga ECS frame buffer device, using 640K of video memory
Amiga-builtin serial driver version 4.30
ttyS0 is the amiga builtin serial port
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide0: X-Surf IDE interface
ide1: X-Surf IDE interface
Probing IDE interface ide0...
Probing IDE interface ide1...
SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast)
esp0: FAST chip is Emulex FAS236 (family=2, version=3)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Blizzard2060 SCSI
Vendor: IBM Model: DCAS-32160 Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: DCAS-34330 Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB)
SCSI device sda: drive cache: write back
sda: RDSK (512) sda1 (DOS^C)(res 2 spb 1) sda2 (SWP^@)(res 2 spb 1) sda3 (LNX^@)(res 2 spb 1)
sd 0:0:0:0: Attached scsi disk sda
esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sdb: 8467200 512-byte hdwr sectors (4335 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 8467200 512-byte hdwr sectors (4335 MB)
SCSI device sdb: drive cache: write back
sdb: RDSK (512) sdb1 (DOS^C)(res 2 spb 1) sdb2 (LNX^@)(res 2 spb 1) sdb3 (LNX^@)(res 2 spb 1) sdb4 (SWP^@)(res 2 spb 1) sdb5 (LNX^@)(res 2 spb 1)
sd 0:0:1:0: Attached scsi disk sdb
mice: PS/2 mouse device common for all mice
input: Amiga Keyboard as /class/input/input0
input: Amiga mouse as /class/input/input1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Adding 125432k swap on /dev/sdb4. Priority:-1 extents:1 across:125432k
EXT3 FS on sdb3, internal journal
cirrusfb: CL Picasso board detected; RAM (2 MB) at $200000, REG at $ec0000
Cirrus Logic chipset on Zorro bus
cirrusfb: Driver for Cirrus Logic based graphic boards, v2.0-pre2
eth0: X-Surf at 0x00ed0000, Ethernet Address 52:54:40:28:b2:0f
Reply to: